EPC2TC32HAF48 vs EPC2TC32UCF48 Perbandingan
Perbandingan bersamaan detil EPC2TC32HAF48 dari Intel dan EPC2TC32UCF48 dari Intel. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | EPC2TC32HAF48 | EPC2TC32UCF48 |
|---|---|---|
| Merek | Intel | Intel |
| Kategori | Memory ICs | Memory ICs |
| Status Lingkungan Hidup | NRND | NRND |
| Ukuran Memori | 32 Mbit (4 Mbyte) | — |
| Fungsi | FPGA Configuration PROM for SRAM-based LUT devices | — |
| Configuration Interface | Altera EPC serial (DATA, DCLK, nCONFIG, nSTATUS, nCASC) | Altera serial PROM interface (DCLK, DATA, nCONFIG, nSTATUS, CONF_DONE) |
| Supply Voltage (VCC) | 3.3 V (typical) | 3.0 V to 3.6 V (3.3 V typical) |
| In-System Programmability | Yes, via JTAG (IEEE 1149.1) | — |
| Cascade Support | Yes, multi-device daisy-chain via nCASC | — |
| FPGA Compatibility | Altera/Intel Cyclone, Stratix, APEX, ACEX families | — |
| Paket | TQFP-48 (7x7x1.0 mm) | 48-pin TQFP (7x7 mm) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Suhu Kerja | [DATA_NEEDED: operating temperature grade] | 0C to +70C (commercial) |
| Lead-Free / RoHS | [DATA_NEEDED: lead-free / RoHS status] | — |
| Level MSL | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL rating] |
| Programming Cycles | [DATA_NEEDED: program/erase endurance] | — |
| Configuration Clock (DCLK) | [DATA_NEEDED: maximum DCLK frequency] | — |
| Configuration Time (typical) | [DATA_NEEDED: configuration time] | — |
| Tipe Memori | — | Non-volatile configuration PROM (CMOS Flash-based) |
| Memory Density | — | 1.6 Mbit (1.6 Mb / 32 Mbit raw) |
| Memory Configuration | — | Serial configuration bitstream storage |
| Supply Voltage (VCCIO) | — | 1.8 V / 2.5 V / 3.3 V (bank-level) |
| Output Drive Current (VCCIO) | — | [DATA_NEEDED: IOH/IOL at 3.3 V VCCIO] |
| Programming Interface | — | IEEE Std. 1149.1 JTAG (in-system programmable) |
| Supported Configuration Modes | — | FPP, AS, PS, JTAG (mode dependent on target FPGA MSEL pins) |
| Daisy Chain Support | — | Yes (multi-device cascade for >16 Mbit FPGAs) |
| Maximum Cascaded Capacity | — | Up to 16 Mbit total across chain |
| Status RoHS | — | [DATA_NEEDED: confirm RoHS compliance] |
| Lead Free | — | [DATA_NEEDED: confirm lead-free] |