EPC2TC32HAF48 vs EPC2TC32UCF48 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng EPC2TC32HAF48 sa pamamagitan ng Intel at EPC2TC32UCF48 sa pamamagitan ng Intel. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Pagsanggunian na paghahambing
| Parametro | EPC2TC32HAF48 | EPC2TC32UCF48 |
|---|---|---|
| Brand | Intel | Intel |
| Kategorya | Memory ICs | Memory ICs |
| Katayuan ng Lifecycle | NRND | NRND |
| Laki ng Memory | 32 Mbit (4 Mbyte) | — |
| Fungsi | FPGA Configuration PROM for SRAM-based LUT devices | — |
| Configuration Interface | Altera EPC serial (DATA, DCLK, nCONFIG, nSTATUS, nCASC) | Altera serial PROM interface (DCLK, DATA, nCONFIG, nSTATUS, CONF_DONE) |
| Supply Voltage (VCC) | 3.3 V (typical) | 3.0 V to 3.6 V (3.3 V typical) |
| In-System Programmability | Yes, via JTAG (IEEE 1149.1) | — |
| Cascade Support | Yes, multi-device daisy-chain via nCASC | — |
| FPGA Compatibility | Altera/Intel Cyclone, Stratix, APEX, ACEX families | — |
| Packhaging | TQFP-48 (7x7x1.0 mm) | 48-pin TQFP (7x7 mm) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Temperature na Operasyon | [DATA_NEEDED: operating temperature grade] | 0C to +70C (commercial) |
| Lead-Free / RoHS | [DATA_NEEDED: lead-free / RoHS status] | — |
| Level ng MSL | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL rating] |
| Programming Cycles | [DATA_NEEDED: program/erase endurance] | — |
| Configuration Clock (DCLK) | [DATA_NEEDED: maximum DCLK frequency] | — |
| Configuration Time (typical) | [DATA_NEEDED: configuration time] | — |
| Uri ng Memory | — | Non-volatile configuration PROM (CMOS Flash-based) |
| Memory Density | — | 1.6 Mbit (1.6 Mb / 32 Mbit raw) |
| Memory Configuration | — | Serial configuration bitstream storage |
| Supply Voltage (VCCIO) | — | 1.8 V / 2.5 V / 3.3 V (bank-level) |
| Output Drive Current (VCCIO) | — | [DATA_NEEDED: IOH/IOL at 3.3 V VCCIO] |
| Programming Interface | — | IEEE Std. 1149.1 JTAG (in-system programmable) |
| Supported Configuration Modes | — | FPP, AS, PS, JTAG (mode dependent on target FPGA MSEL pins) |
| Daisy Chain Support | — | Yes (multi-device cascade for >16 Mbit FPGAs) |
| Maximum Cascaded Capacity | — | Up to 16 Mbit total across chain |
| Tindminan RoHS | — | [DATA_NEEDED: confirm RoHS compliance] |
| Lead Free | — | [DATA_NEEDED: confirm lead-free] |