EPC2TC32HAF48 vs EPC2TC32UCF48 Karşılaştırma
Ayrıntılı yan yana karşılaştırma EPC2TC32HAF48 tarafından Intel ve EPC2TC32UCF48 tarafından IntelAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | EPC2TC32HAF48 | EPC2TC32UCF48 |
|---|---|---|
| Marka | Intel | Intel |
| Kategori | Memory ICs | Memory ICs |
| Yaşam Döngüsü Durumu | NRND | NRND |
| Bellek Boyutu | 32 Mbit (4 Mbyte) | — |
| Fonksiyon | FPGA Configuration PROM for SRAM-based LUT devices | — |
| Configuration Interface | Altera EPC serial (DATA, DCLK, nCONFIG, nSTATUS, nCASC) | Altera serial PROM interface (DCLK, DATA, nCONFIG, nSTATUS, CONF_DONE) |
| Supply Voltage (VCC) | 3.3 V (typical) | 3.0 V to 3.6 V (3.3 V typical) |
| In-System Programmability | Yes, via JTAG (IEEE 1149.1) | — |
| Cascade Support | Yes, multi-device daisy-chain via nCASC | — |
| FPGA Compatibility | Altera/Intel Cyclone, Stratix, APEX, ACEX families | — |
| Paket | TQFP-48 (7x7x1.0 mm) | 48-pin TQFP (7x7 mm) |
| Montaj Türü | Surface Mount | Surface Mount |
| İşletim Sıcaklığı | [DATA_NEEDED: operating temperature grade] | 0C to +70C (commercial) |
| Lead-Free / RoHS | [DATA_NEEDED: lead-free / RoHS status] | — |
| MSL Seviyesi | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: MSL rating] |
| Programming Cycles | [DATA_NEEDED: program/erase endurance] | — |
| Configuration Clock (DCLK) | [DATA_NEEDED: maximum DCLK frequency] | — |
| Configuration Time (typical) | [DATA_NEEDED: configuration time] | — |
| Bellek Türü | — | Non-volatile configuration PROM (CMOS Flash-based) |
| Memory Density | — | 1.6 Mbit (1.6 Mb / 32 Mbit raw) |
| Memory Configuration | — | Serial configuration bitstream storage |
| Supply Voltage (VCCIO) | — | 1.8 V / 2.5 V / 3.3 V (bank-level) |
| Output Drive Current (VCCIO) | — | [DATA_NEEDED: IOH/IOL at 3.3 V VCCIO] |
| Programming Interface | — | IEEE Std. 1149.1 JTAG (in-system programmable) |
| Supported Configuration Modes | — | FPP, AS, PS, JTAG (mode dependent on target FPGA MSEL pins) |
| Daisy Chain Support | — | Yes (multi-device cascade for >16 Mbit FPGAs) |
| Maximum Cascaded Capacity | — | Up to 16 Mbit total across chain |
| RoHS Durumu | — | [DATA_NEEDED: confirm RoHS compliance] |
| Lead Free | — | [DATA_NEEDED: confirm lead-free] |