LT8364EMSE vs LT8364HMSE#PBF Perbandingan
Perbandingan bersamaan detil LT8364EMSE dari Analog Devices dan LT8364HMSE#PBF dari Analog Devices. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Analog Devices
LT8364EMSE - 60V 4A Boost/SEPIC/Inverting Converter | Analog Devices
LT8364EMSE ✓ AktifAnalog Devices
LT8364HMSE#PBF - 60V, 4A Boost/SEPIC/Inverting DC/DC Converter | ADI
LT8364HMSE#PBF ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | LT8364EMSE | LT8364HMSE#PBF |
|---|---|---|
| Merek | Analog Devices | Analog Devices |
| Kategori | DC-DC Converters | DC-DC Converters |
| Status Lingkungan Hidup | Aktif | Aktif |
| Topologi | Boost, SEPIC, or Inverting (selectable via single FB pin) | Boost, SEPIC, Inverting |
| Rentang Tegangan Masukan | 2.8 V to 60 V | 2.8 V to 60 V |
| Switch Voltage Rating | 60 V maximum | 60 V |
| Switch Current Rating | 4 A peak | 4 A peak |
| Rentang Tegangan Output | 1.6 V to 60 V (boost/SEPIC); negative in inverting | — |
| Quiescent Current (Burst Mode) | 9 uA typical | 9 µA |
| Output Ripple (Burst Mode) | 15 mV typical | — |
| Internal Oscillator Frequency | 2 MHz typical (RT programmable 200 kHz to 2 MHz) | — |
| Suhu Hubung Kerja | -40 C to +125 C (E grade) / 0 C to +125 C (specified) | — |
| Paket | 16-pin MSOP (12-lead) with Exposed Pad (MSE), 3.00 mm body width | 12-lead MSOP with exposed pad (MSE) |
| Tipe Mounting | Surface Mount | Surface Mount |
| EN/UVLO Pin | Yes (combined enable + accurate undervoltage lockout) | — |
| Control Architecture | Constant-frequency peak current mode | — |
| Level MSL | 1 (per JEDEC J-STD-020, unlimited floor life) | 1 |
| Status RoHS | Compliant | Compliant (Pb-free #PBF suffix) |
| Output Voltage Range (Boost/SEPIC) | — | 1.6 V to 60 V |
| Konfigurasi Output | — | Positive fixed (single output) |
| Frekuensi Pengganti | — | 1.4 MHz to 2 MHz (programmable via RT) |
| Default Switching Frequency | — | 2 MHz |
| Typical Output Ripple | — | < 15 mV |
| Control Mode | — | Current-mode |
| Feedback Pin | — | Single FB (positive or negative feedback) |
| Rentang Suhu Hubung Kerja | — | -40 °C to +150 °C (H grade) |
| Mulai Dengan Lebih Lambat | — | Internal |
| Penutupan Panas | — | Yes (internal) |