MMA1200D vs MMA1250D Perbandingan
Perbandingan bersamaan detil MMA1200D dari NXP Semiconductors dan MMA1250D dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
NXP Semiconductors
MMA1200D - ±281g Z-Axis Accelerometer | NXP SOIC-16
MMA1200D ⚠ Waktu Beli TerakhirPerbandingan Spesifikasi
| Parameter Umum | MMA1200D | MMA1250D |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Motion Sensors | Motion Sensors |
| Status Lingkungan Hidup | Waktu Pembelian Terakhir | Obsolete |
| Tipe Pengukur | Accelerometer, Z-axis | Accelerometer, Z-axis single-axis |
| Dampak Pengukuran | ±281 g | — |
| Axis | Z (single) | Z (vertical / out-of-plane) |
| Tipe Output | Analog voltage | Analog, ratiometric voltage |
| Tegangan Pemuat | 5.0 V nominal | — |
| Sensitivity | [DATA_NEEDED: sensitivity mV/g] | — |
| Zero-g Output | Approximately 2.5 V (ratiometric) | — |
| Bandwidth | 400 Hz (factory-set 4-pole LPF cutoff) | — |
| Filter Type | 4-pole low-pass (Butterworth) | On-chip 2-pole low-pass filter |
| Self-Test | Yes (electromechanical) | Yes - system-level, logic input |
| Suhu Kerja | -40C to +125C | — |
| Paket | 16-pin SOIC | 16-pin SOIC (SOP-16), surface mount |
| Tipe Mounting | Surface Mount | Surface Mount |
| Status RoHS | Non-Compliant (contains lead) | Non-Compliant (contains lead, per DigiChip listing) |
| Technology | Capacitive MEMS, surface micromachined | — |
| Acceleration Range | — | ±5 g |
| Sensing Technology | — | Capacitive MEMS (silicon micromachined) |
| Supply Voltage (VDD) | — | 4.75 V to 5.25 V |
| Sensitivity (nominal) | — | [DATA_NEEDED: sensitivity V/g] |
| Zero-g Offset (nominal) | — | 2.5 V (at VDD = 5 V, ratiometric) |
| Filter Cut-off Frequency (-3 dB) | — | 50 Hz |
| Rentang Suhu Kerja | — | -40 °C to +105 °C |
| Level MSL | — | [DATA_NEEDED: MSL rating] |
| Lead-Free Status | — | Contains Lead |
| Temperature Grade | — | Automotive |