MMA7260QR2 vs MMA6260QR2 Perbandingan
Perbandingan bersamaan detil MMA7260QR2 dari NXP Semiconductors dan MMA6260QR2 dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
NXP Semiconductors
MMA7260QR2 - ±1.5g-6g 3-Axis MEMS Accelerometer, QFN-16 | NXP
MMA7260QR2 ObsoletePerbandingan Spesifikasi
| Parameter Umum | MMA7260QR2 | MMA6260QR2 |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Motion Sensors | Motion Sensors |
| Status Lingkungan Hidup | Obsolete | Obsolete |
| Tipe Pengukur | 3-axis MEMS accelerometer (capacitive micromachined) | — |
| Acceleration Range | ±1.5g / 2g / 4g / 6g (selectable via g-Select pins) | ±1.5 g |
| Sensing Axes | X, Y, Z | — |
| Tipe Output | Analog (ratiometric voltage) | Analog, ratiometric |
| Tegangan Pemuat | 2.2 V to 3.6 V | [DATA_NEEDED: Vdd range] |
| Arus Pemuat | [DATA_NEEDED: typical active current in mA] | [DATA_NEEDED: Idd] |
| Sensitivity (1.5g) | 800 mV/g | — |
| Sensitivity (6g) | 200 mV/g | — |
| Bandwidth X / Y | 350 Hz | — |
| Bandwidth Z | 150 Hz | — |
| Zero-g Offset (typ) | [DATA_NEEDED: zero-g bias level] | — |
| Tetesan Bising | [DATA_NEEDED: noise in mg/sqrt(Hz) or ug/sqrt(Hz)] | — |
| Filter Type | 1-pole low-pass (on-chip) | — |
| Suhu Kerja | -20C to +85C | -40 °C to +85 °C |
| Paket | QFN-16 (6 mm x 6 mm, HQCCN) | 16-QFN-EP (6x6 mm) |
| Tipe Mounting | Surface Mount | Surface Mount |
| g-Select Inputs | 2 logic pins (g-Sel1, g-Sel2) | — |
| Sleep Mode | Yes (Sleep pin) | — |
| Status RoHS | RoHS Compliant | RoHS Compliant (per Digchip) |
| Lead-Free Status | Lead Free | — |
| Moisture Sensitivity | MSL 2 (per Avaq comparison data) | — |
| Origin | Freescale / Motorola semiconductor IP, now NXP | — |
| Type | — | Accelerometer, Dual Axis (X, Y) |
| Axis | — | X, Y (dual) |
| Sensitivity | — | [DATA_NEEDED: sensitivity V/g] |
| Bandwidth | — | 50 Hz (1-pole low-pass, factory set) |
| Self-Test | — | Yes (logic-high on ST pin) |
| g-Select Pins | — | Yes (4 sensitivity options) |
| Lead Status | — | Contains Lead (per Digchip, prior to conversion) |