MPX4115A117 vs MPX4115AP Perbandingan
Perbandingan bersamaan detil MPX4115A117 dari NXP Semiconductors dan MPX4115AP dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | MPX4115A117 | MPX4115AP |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 15 kPa to 115 kPa (2.18 psi to 16.68 psi) |
| Tipe Output | Analog, Ratiometric Voltage | Analog Voltage (ratiometric) |
| Rentang Tegangan Output | 0.2 V to 4.8 V | 0.20 V to 4.80 V |
| Tegangan Pemuat | 4.85 V to 5.35 V (5 V typ) | 5.1 V typical (4.85 V to 5.35 V range) |
| Arus Pemuat | [DATA_NEEDED: supply current] | 6 mA typical |
| Accuracy | ±1.5% over 0°C to 85°C | — |
| Suhu Kerja | -40 °C to +125 °C | — |
| Response Time | 1.0 ms (typical) | — |
| Paket / Case | 6-SIP Module (Case 867-08) | 6-SIP Module (Case 867B-04) |
| Port Type | Single axial port, top side | — |
| Tipe Mounting | Through-Hole | Through Hole |
| Media Compatibility | Dry air, non-corrosive gases | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film network | On-chip bipolar op-amp + thin-film calibration resistors |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| Jumlah Pin | 6 | — |
| Sensitivity | — | 45.9 mV/kPa |
| Linearity | — | 0.2% to 1.5% (depending on operating conditions) |
| Rentang Suhu Kerja | — | -40 C to +125 C |
| Compensated Temperature Range | — | 0 C to +85 C |
| Pressure Port | — | Male - 0.19" (4.93 mm) Tube |
| Termination | — | Solder (SIP pins) |
| Min Order Quantity | — | 200 (per NXP product page) |
| Min Package Quantity | — | 20 (Tray) |