MPX4115A117 vs MPX4115AP 比較
詳細並排比較 MPX4115A117 由 NXP Semiconductors 與 MPX4115AP 由 NXP Semiconductors. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | MPX4115A117 | MPX4115AP |
|---|---|---|
| 品牌 | NXP Semiconductors | NXP Semiconductors |
| 類別 | Pressure Sensors | Pressure Sensors |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | 15 kPa to 115 kPa (2.18 psi to 16.68 psi) |
| 輸出類型 | Analog, Ratiometric Voltage | Analog Voltage (ratiometric) |
| 輸出電壓範圍 | 0.2 V to 4.8 V | 0.20 V to 4.80 V |
| 供應電壓 | 4.85 V to 5.35 V (5 V typ) | 5.1 V typical (4.85 V to 5.35 V range) |
| 供應電流 | [DATA_NEEDED: supply current] | 6 mA typical |
| Accuracy | ±1.5% over 0°C to 85°C | — |
| 工作溫度 | -40 °C to +125 °C | — |
| Response Time | 1.0 ms (typical) | — |
| 封裝 / 外殼 | 6-SIP Module (Case 867-08) | 6-SIP Module (Case 867B-04) |
| Port Type | Single axial port, top side | — |
| 安裝類型 | Through-Hole | Through Hole |
| Media Compatibility | Dry air, non-corrosive gases | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film network | On-chip bipolar op-amp + thin-film calibration resistors |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | Compliant |
| 腳位數 | 6 | — |
| Sensitivity | — | 45.9 mV/kPa |
| Linearity | — | 0.2% to 1.5% (depending on operating conditions) |
| 工作溫度範圍 | — | -40 C to +125 C |
| Compensated Temperature Range | — | 0 C to +85 C |
| Pressure Port | — | Male - 0.19" (4.93 mm) Tube |
| Termination | — | Solder (SIP pins) |
| Min Order Quantity | — | 200 (per NXP product page) |
| Min Package Quantity | — | 20 (Tray) |