MPX4115AP vs MPX4115A117 Perbandingan
Perbandingan bersamaan detil MPX4115AP dari NXP Semiconductors dan MPX4115A117 dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | MPX4115AP | MPX4115A117 |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 psi to 16.68 psi) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Sensitivity | 45.9 mV/kPa | — |
| Tipe Output | Analog Voltage (ratiometric) | Analog, Ratiometric Voltage |
| Rentang Tegangan Output | 0.20 V to 4.80 V | 0.2 V to 4.8 V |
| Tegangan Pemuat | 5.1 V typical (4.85 V to 5.35 V range) | 4.85 V to 5.35 V (5 V typ) |
| Arus Pemuat | 6 mA typical | [DATA_NEEDED: supply current] |
| Linearity | 0.2% to 1.5% (depending on operating conditions) | — |
| Rentang Suhu Kerja | -40 C to +125 C | — |
| Compensated Temperature Range | 0 C to +85 C | — |
| Paket / Case | 6-SIP Module (Case 867B-04) | 6-SIP Module (Case 867-08) |
| Pressure Port | Male - 0.19" (4.93 mm) Tube | — |
| Tipe Mounting | Through Hole | Through-Hole |
| Termination | Solder (SIP pins) | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film calibration resistors | On-chip bipolar op-amp + thin-film network |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Min Order Quantity | 200 (per NXP product page) | — |
| Min Package Quantity | 20 (Tray) | — |
| Accuracy | — | ±1.5% over 0°C to 85°C |
| Suhu Kerja | — | -40 °C to +125 °C |
| Response Time | — | 1.0 ms (typical) |
| Port Type | — | Single axial port, top side |
| Media Compatibility | — | Dry air, non-corrosive gases |
| Jumlah Pin | — | 6 |