MPX4115AP vs MPX4115A117 比較
詳細並排比較 MPX4115AP 由 NXP Semiconductors 與 MPX4115A117 由 NXP Semiconductors. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | MPX4115AP | MPX4115A117 |
|---|---|---|
| 品牌 | NXP Semiconductors | NXP Semiconductors |
| 類別 | Pressure Sensors | Pressure Sensors |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 psi to 16.68 psi) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Sensitivity | 45.9 mV/kPa | — |
| 輸出類型 | Analog Voltage (ratiometric) | Analog, Ratiometric Voltage |
| 輸出電壓範圍 | 0.20 V to 4.80 V | 0.2 V to 4.8 V |
| 供應電壓 | 5.1 V typical (4.85 V to 5.35 V range) | 4.85 V to 5.35 V (5 V typ) |
| 供應電流 | 6 mA typical | [DATA_NEEDED: supply current] |
| Linearity | 0.2% to 1.5% (depending on operating conditions) | — |
| 工作溫度範圍 | -40 C to +125 C | — |
| Compensated Temperature Range | 0 C to +85 C | — |
| 封裝 / 外殼 | 6-SIP Module (Case 867B-04) | 6-SIP Module (Case 867-08) |
| Pressure Port | Male - 0.19" (4.93 mm) Tube | — |
| 安裝類型 | Through Hole | Through-Hole |
| Termination | Solder (SIP pins) | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film calibration resistors | On-chip bipolar op-amp + thin-film network |
| RoHS 狀態 | Compliant | [DATA_NEEDED: RoHS status] |
| Min Order Quantity | 200 (per NXP product page) | — |
| Min Package Quantity | 20 (Tray) | — |
| Accuracy | — | ±1.5% over 0°C to 85°C |
| 工作溫度 | — | -40 °C to +125 °C |
| Response Time | — | 1.0 ms (typical) |
| Port Type | — | Single axial port, top side |
| Media Compatibility | — | Dry air, non-corrosive gases |
| 腳位數 | — | 6 |