MPXA6115A6T1 vs MPXHZ6115A6T1 Perbandingan
Perbandingan bersamaan detil MPXA6115A6T1 dari STMicroelectronics dan MPXHZ6115A6T1 dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
STMicroelectronics
MPXA6115A6T1 - 15-115 kPa Absolute Pressure Sensor | STMicroelectronics
MPXA6115A6T1 ✓ AktifNXP Semiconductors
MPXHZ6115A6T1 - 15-115 kPa Absolute Pressure Sensor | NXP | 8-SOIC
MPXHZ6115A6T1 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | MPXA6115A6T1 | MPXHZ6115A6T1 |
|---|---|---|
| Merek | STMicroelectronics | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Tipe Output | Analog Voltage | Analog Voltage |
| Tegangan Output | 0.2 V to 4.7 V (at 5 V supply) | — |
| Tegangan Pemuat | 4.75 V to 5.25 V | 5 V (typical, [DATA_NEEDED: full min/max range]) |
| Accuracy | ±1.5% FS | ±1.5% (0 °C to 85 °C) |
| Port Style | Single horizontal port (axial) | No Port (media-resistant PPS surface mount) |
| Paket | 8-SMD Gull Wing (SOP 8-surface-mount module) | 8-SOIC (0.295", 7.50 mm Width), Surface Mount |
| Tipe Mounting | Surface Mount | Surface Mount (PPS thermoplastic) |
| Termination Style | PCB / Gull Wing | — |
| Suhu Kerja | -40 °C to +125 °C | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | — |
| Temperature Compensation | On-chip, calibrated | — |
| Status RoHS | Compliant (per distributor listings) | [DATA_NEEDED: RoHS compliance status] |
| Level MSL | [DATA_NEEDED: MSL level] | — |
| Output Function | Ratiometric to supply voltage | — |
| Maximum Overpressure | — | 400 kPa (58.02 PSI) |
| Rentang Tegangan Output | — | 0.2 V to 4.7 V (at 5 V supply) |
| Temperature Compensation Range | — | -40 °C to +125 °C |
| Rentang Suhu Kerja | — | -40 °C to +125 °C |
| Sensor Technology | — | MEMS silicon strain-gauge with bipolar op-amp signal conditioning |
| Media Compatibility | — | Media-resistant PPS package; dry gas media recommended |