MSP430A002IPM vs MSP430F5329IPN Perbandingan

Perbandingan bersamaan detil MSP430A002IPM dari Texas Instruments dan MSP430F5329IPN dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Texas Instruments
MSP430A002IPM MSP430A002IPM - 16-Bit 8MHz MCU 32KB Flash | Texas Instruments

MSP430A002IPM - 16-Bit 8MHz MCU 32KB Flash | Texas Instruments

MSP430A002IPM ✓ Aktif
Texas Instruments
MSP430F5329IPN MSP430F5329IPN - 25MHz MCU 128KB Flash 80-LQFP | TI MSP430

MSP430F5329IPN - 25MHz MCU 128KB Flash 80-LQFP | TI MSP430

MSP430F5329IPN ✓ Aktif

Perbandingan Spesifikasi

Parameter Umum MSP430A002IPM MSP430F5329IPN
Merek Texas Instruments Texas Instruments
Kategori Microcontrollers Microcontrollers
Status Lingkungan Hidup Aktif Aktif
Product Type 16-bit mixed-signal microcontroller —
Core Architecture MSP430 RISC —
Clock Speed 8 MHz —
Flash Program Memory 32 KB (32K × 8 + 256 bytes) —
RAM 1 KB —
Supply Voltage Range 1.8 V to 3.6 V —
ADC Resolution 12-bit —
USART Interfaces 2 —
I/O Ports 48 —
Paket 64-LQFP (10 mm × 10 mm) 80-pin LQFP (PN), 12 x 12 mm
Terminal Count 64 —
Tipe Mounting Surface mount Surface Mount
Temperature Grade Industrial —
Interface Functions Asynchronous UART or synchronous SPI —
Series MSP430x1xx —
Status RoHS [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Pricing [DATA_NEEDED: distributor unit pricing] —
Core — MSP430 CPUXV2 (16-bit RISC)
Frekuensi Bawah Maximum — 25 MHz
Program Memory (Flash) — 128 KB (128K x 8)
SRAM — 10 KB
Supply Voltage (DVCC) — 2.4 V to 3.6 V
Suhu Kerja — -40C to +85C (Industrial)
ADC — 12-bit SAR, up to 200 ksps
Analog Comparator — Yes (on-chip)
Hardware Multiplier — 16 x 16 -> 32-bit, single cycle
DMA Channels — Yes (multi-channel)
Serial Interfaces — UART, SPI, I2C (USCI modules, x2)
Timers — 4 x 16-bit
RTC — Yes, with alarm capabilities
GPIO Pins — 63 (per TI product page)
Active Mode Current — 180 uA/MHz at 3 V (typical)
Low-Power Modes — LPM0-LPM4, LPMx.5 (RAM retention off)
Programming Interface — JTAG, Spy-Bi-Wire (SBW)

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon