PCA9534PWR vs TCA9554PWR Perbandingan
Perbandingan bersamaan detil PCA9534PWR dari NXP Semiconductors dan TCA9554PWR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
NXP Semiconductors
PCA9534PWR - 8-Bit I2C I/O Expander | NXP Semiconductors (Tape & Reel)
PCA9534PWR ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | PCA9534PWR | TCA9554PWR |
|---|---|---|
| Merek | NXP Semiconductors | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Device Type | 8-bit CMOS I2C-bus and SMBus low-power I/O port expander | 8-bit I/O expander |
| Number of GPIO Pins | 8 | — |
| Supply Voltage Range | 2.3 V to 5.5 V | 1.65 V to 5.5 V |
| I2C Bus Frequency | 400 kHz | — |
| Antarmuka | I2C-bus and SMBus | I2C / SMBus |
| Interrupt Output | Yes | Yes |
| Configuration Registers | Yes | Yes |
| Address Configuration Pins | A0, A1, and A2 | — |
| Maximum Devices Sharing Bus | 8 devices per manufacturer data | — |
| Internal I/O Pull-up Resistors | Removed | — |
| Paket | 16-pin TSSOP | 16-TSSOP |
| Jumlah Pin | 16 pins | 16 pins |
| Tipe Mounting | Surface Mount | Surface mount |
| PCF8574 Compatibility | Pin-to-pin and I2C address compatible; software changes required | — |
| Manufacturer | NXP Semiconductors | — |
| Status Lingkungan Hidup | Active | — |
| Suhu Kerja | [DATA_NEEDED: operating temperature range] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| I/O Port Count | — | 8 ports |
| Maximum I2C Bus Frequency | — | 400 kHz |
| Weak Pull-Up Configuration | — | Yes |
| Address Inputs | — | A0, A1, A2 |
| Maximum Devices Per Bus | — | 8 devices |
| Reset Behavior | — | Power-on reset to default state |
| Input Port Function | — | 8-bit general-purpose input |
| Output Port Function | — | 8-bit general-purpose output |
| Rentang Suhu Kerja | — | [DATA_NEEDED: operating temperature range] |
| Output Current per Port | — | [DATA_NEEDED: output current per port] |
| Standby Current | — | [DATA_NEEDED: standby current] |