PCA9534PWR vs TCA9554PWR השוואה
השוואה מפורטת זה לצד זה של PCA9534PWR מאת NXP Semiconductors ו TCA9554PWR מאת Texas Instruments. השווה מפרטים עיקריים, פרמטרים חשמליים, אריזה, סטטוס מחזור חיים, תמחור וזמינות כדי לקבוע את הרכיב הטוב ביותר לדרישות העיצוב שלך.
NXP Semiconductors
PCA9534PWR - 8-Bit I2C I/O Expander | NXP Semiconductors (Tape & Reel)
PCA9534PWR ✓ פעילהשוואת מפרטים
| פרמטר | PCA9534PWR | TCA9554PWR |
|---|---|---|
| מותג | NXP Semiconductors | Texas Instruments |
| קטגוריה | Interface ICs | Interface ICs |
| סטטוס מחזור חיים | פעיל | פעיל |
| Device Type | 8-bit CMOS I2C-bus and SMBus low-power I/O port expander | 8-bit I/O expander |
| Number of GPIO Pins | 8 | — |
| Supply Voltage Range | 2.3 V to 5.5 V | 1.65 V to 5.5 V |
| I2C Bus Frequency | 400 kHz | — |
| ממשק | I2C-bus and SMBus | I2C / SMBus |
| Interrupt Output | Yes | Yes |
| Configuration Registers | Yes | Yes |
| Address Configuration Pins | A0, A1, and A2 | — |
| Maximum Devices Sharing Bus | 8 devices per manufacturer data | — |
| Internal I/O Pull-up Resistors | Removed | — |
| מארז | 16-pin TSSOP | 16-TSSOP |
| מספר פינים | 16 pins | 16 pins |
| סוג הרכבה | Surface Mount | Surface mount |
| PCF8574 Compatibility | Pin-to-pin and I2C address compatible; software changes required | — |
| Manufacturer | NXP Semiconductors | — |
| סטטוס מחזור חיים | Active | — |
| טמפרטורת פעולה | [DATA_NEEDED: operating temperature range] | — |
| סטטוס RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| I/O Port Count | — | 8 ports |
| Maximum I2C Bus Frequency | — | 400 kHz |
| Weak Pull-Up Configuration | — | Yes |
| Address Inputs | — | A0, A1, A2 |
| Maximum Devices Per Bus | — | 8 devices |
| Reset Behavior | — | Power-on reset to default state |
| Input Port Function | — | 8-bit general-purpose input |
| Output Port Function | — | 8-bit general-purpose output |
| טווח טמפרטורת פעולה | — | [DATA_NEEDED: operating temperature range] |
| Output Current per Port | — | [DATA_NEEDED: output current per port] |
| Standby Current | — | [DATA_NEEDED: standby current] |