SN75176BDR vs SN75176BPS Perbandingan
Perbandingan bersamaan detil SN75176BDR dari Texas Instruments dan SN75176BPS dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | SN75176BDR | SN75176BPS |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Differential bus transceiver | Differential bus transceiver |
| Tegangan Pemuat | 5 V | — |
| Supported Standards | TIA/EIA-422-B and TIA/EIA-485-A | RS-422 and RS-485 |
| ITU Recommendations | V.11 and X.27 | — |
| Communication Mode | Bidirectional | — |
| Bus Architecture | Multipoint transmission | Multipoint transmission |
| Transmission Line Type | Balanced transmission lines | — |
| Driver Output State | 3-state | — |
| Receiver Output State | 3-state | — |
| Rentang Suhu Kerja | 0 °C to 70 °C | [DATA_NEEDED: operating temperature range] |
| Paket | SOIC (D), 8 pins | 8-pin SOIC, 5.30 mm width |
| Tipe Mounting | Surface mount | Surface mount |
| Jumlah Pin | 8 pins | — |
| Manufacturer | Texas Instruments | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | [DATA_NEEDED: maximum data rate] |
| Input and Output Electrical Limits | [DATA_NEEDED: input and output electrical limits] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Arus Memerintah | [DATA_NEEDED: quiescent current] | — |
| Standard Compliance | — | ANSI TIA/EIA-422-B, ANSI TIA/EIA-485-A, ITU V.11 and ITU X.27 |
| Driver Count | — | 1 differential driver |
| Receiver Count | — | 1 differential receiver |
| Driver Output States | — | 3-state |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Signal Type | — | Balanced differential |
| Communication Direction | — | Bidirectional |
| Maximum Bus Length | — | [DATA_NEEDED: maximum bus length] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Differential Input Sensitivity | — | [DATA_NEEDED: receiver differential input sensitivity] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Arus Pemuat | — | [DATA_NEEDED: supply current] |
| Maximum Input Voltage | — | [DATA_NEEDED: maximum input voltage] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |