SN75176BDR vs SN75176BPS 비교
다음의 상세 나란히 비교: SN75176BDR 제조: Texas Instruments 및 SN75176BPS 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | SN75176BDR | SN75176BPS |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Differential bus transceiver | Differential bus transceiver |
| 공급 전압 | 5 V | — |
| Supported Standards | TIA/EIA-422-B and TIA/EIA-485-A | RS-422 and RS-485 |
| ITU Recommendations | V.11 and X.27 | — |
| Communication Mode | Bidirectional | — |
| Bus Architecture | Multipoint transmission | Multipoint transmission |
| Transmission Line Type | Balanced transmission lines | — |
| Driver Output State | 3-state | — |
| Receiver Output State | 3-state | — |
| 동작 온도 범위 | 0 °C to 70 °C | [DATA_NEEDED: operating temperature range] |
| 패키지 | SOIC (D), 8 pins | 8-pin SOIC, 5.30 mm width |
| 실장 유형 | Surface mount | Surface mount |
| 핀 수 | 8 pins | — |
| Manufacturer | Texas Instruments | — |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | [DATA_NEEDED: maximum data rate] |
| Input and Output Electrical Limits | [DATA_NEEDED: input and output electrical limits] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| 대기 전류 | [DATA_NEEDED: quiescent current] | — |
| Standard Compliance | — | ANSI TIA/EIA-422-B, ANSI TIA/EIA-485-A, ITU V.11 and ITU X.27 |
| Driver Count | — | 1 differential driver |
| Receiver Count | — | 1 differential receiver |
| Driver Output States | — | 3-state |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Signal Type | — | Balanced differential |
| Communication Direction | — | Bidirectional |
| Maximum Bus Length | — | [DATA_NEEDED: maximum bus length] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Differential Input Sensitivity | — | [DATA_NEEDED: receiver differential input sensitivity] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| 공급 전류 | — | [DATA_NEEDED: supply current] |
| Maximum Input Voltage | — | [DATA_NEEDED: maximum input voltage] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |