SN75176BDR vs SN75176BPS Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci SN75176BDR disebabkan oleh Texas Instruments dan SN75176BPS disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Pengandingan Spesifikasi
| Parametr | SN75176BDR | SN75176BPS |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Differential bus transceiver | Differential bus transceiver |
| Tegangan Pemberi Arus | 5 V | — |
| Supported Standards | TIA/EIA-422-B and TIA/EIA-485-A | RS-422 and RS-485 |
| ITU Recommendations | V.11 and X.27 | — |
| Communication Mode | Bidirectional | — |
| Bus Architecture | Multipoint transmission | Multipoint transmission |
| Transmission Line Type | Balanced transmission lines | — |
| Driver Output State | 3-state | — |
| Receiver Output State | 3-state | — |
| Gambaran Suhu Operasi | 0 °C to 70 °C | [DATA_NEEDED: operating temperature range] |
| Kemasan | SOIC (D), 8 pins | 8-pin SOIC, 5.30 mm width |
| Jenis Pemasangan | Surface mount | Surface mount |
| Kiraan Pin | 8 pins | — |
| Manufacturer | Texas Instruments | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | [DATA_NEEDED: maximum data rate] |
| Input and Output Electrical Limits | [DATA_NEEDED: input and output electrical limits] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Arus Dalam Tentera | [DATA_NEEDED: quiescent current] | — |
| Standard Compliance | — | ANSI TIA/EIA-422-B, ANSI TIA/EIA-485-A, ITU V.11 and ITU X.27 |
| Driver Count | — | 1 differential driver |
| Receiver Count | — | 1 differential receiver |
| Driver Output States | — | 3-state |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Signal Type | — | Balanced differential |
| Communication Direction | — | Bidirectional |
| Maximum Bus Length | — | [DATA_NEEDED: maximum bus length] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Differential Input Sensitivity | — | [DATA_NEEDED: receiver differential input sensitivity] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| Arus Pemberi Arus | — | [DATA_NEEDED: supply current] |
| Maximum Input Voltage | — | [DATA_NEEDED: maximum input voltage] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |