STM32F103Z vs STM32F103ZET6 Perbandingan
Perbandingan bersamaan detil STM32F103Z dari STMicroelectronics dan STM32F103ZET6 dari STMicroelectronics. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
STMicroelectronics
STM32F103Z - 72MHz Cortex-M3 MCU, 144-LQFP | STMicroelectronics
STM32F103Z ✓ AktifSTMicroelectronics
STM32F103ZET6 - 72MHz Cortex-M3 MCU 512KB Flash | STMicroelectronics
STM32F103ZET6 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | STM32F103Z | STM32F103ZET6 |
|---|---|---|
| Merek | STMicroelectronics | STMicroelectronics |
| Kategori | Microcontrollers | Microcontrollers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Harga Unit (USD) | — | $5,39 |
| Core | ARM Cortex-M3 | — |
| CPU Bit Width | 32-bit | — |
| Maximum CPU Clock | 72 MHz | — |
| Performance | 1.25 DMIPS/MHz | — |
| Flash Memory (ZE) | 512 KB | — |
| Flash Memory (ZD) | 384 KB | — |
| Flash Memory (ZC) | 256 KB | — |
| SRAM | 64 KB | — |
| Tegangan Pemuat | 2.0 V to 3.6 V | — |
| Paket | 144-LQFP (20x20 mm) | LQFP-144 (20 x 20 mm) |
| Suhu Kerja | -40C to +85C (commercial) | -40C to +85C |
| GPIO Count | 112 | — |
| USB | USB 2.0 Full-Speed with on-chip PHY | — |
| CAN | 1x CAN 2.0B | — |
| ADC | 3x 12-bit, 1 µs conversion | — |
| Timers | 4x 16-bit general-purpose + advanced-control timers | Advanced-control, general-purpose and basic timers plus RTC |
| Communication Peripherals | USART, SPI, I2C, USB, CAN | — |
| Status RoHS | Compliant | Compliant |
| Core Processor | — | ARM Cortex-M3 32-bit RISC |
| Frekuensi Bawah Maximum | — | 72 MHz |
| Core Performance | — | 1.25 DMIPS/MHz (Dhrystone 2.1) |
| Program Memory Size | — | 512 KB Flash |
| SRAM Size | — | 64 KB |
| Supply Voltage Range | — | 2.0 V to 3.6 V |
| Number of GPIOs | — | 112 |
| ADC Resolution | — | 12-bit, 3 ADCs, up to 21 channels |
| DAC Resolution | — | 12-bit, 2 channels |
| DMA Channels | — | 12 |
| Communication Interfaces | — | 5 USART, 3 SPI, 2 I2C, 1 CAN 2.0B, 1 USB 2.0 FS, 1 SDIO |
| Debug Interface | — | JTAG and Serial Wire Debug (SWD) |
| Boot Sources | — | Flash, system memory, or SRAM |
| Tipe Mounting | — | Surface Mount |