TJA1024HG vs TJA1024HGZ Perbandingan
Perbandingan bersamaan detil TJA1024HG dari NXP Semiconductors dan TJA1024HGZ dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | TJA1024HG | TJA1024HGZ |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Unknown |
| Fungsi | Quad LIN 2.2A/SAE J2602 transceiver | — |
| Number of LIN Channels | 4 (two independent dual-LIN transceivers) | — |
| Laju Data | Up to 20 kBd | — |
| LIN Compliance | LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602 | — |
| LIN Bus Peak Current | 2.2 A | — |
| Supply Voltage (VBAT) | 5 V to 27 V (load-dump tolerant to 40 V) | — |
| Sleep Mode Current | < 10 uA (typical per dual channel) | — |
| Suhu Kerja | -40 C to +125 C | — |
| ESD (LIN pin, HBM) | [DATA_NEEDED: HBM ESD value V] | — |
| Paket | DHVQFN-24 (SOT815-1), 3.5 x 5.5 mm | 24-DHVQFN, 5.5 mm x 3.5 mm |
| Tipe Mounting | Surface Mount | Surface mount |
| AEC-Q100 | Qualified | — |
| Status RoHS | Compliant | unknown |
| Software Compatibility | TJA1022, TJA1027, TJA1029 | Compatible with TJA1022, TJA1027, and TJA1029 |
| Jumlah Pin | 24 | 24 pins |
| Product Type | — | Quad LIN 2.2A/SAE J2602 transceiver |
| LIN Channel Count | — | 4 channels |
| Maximum LIN Baud Rate | — | 20 kBd |
| LIN Standard Compliance | — | LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602 |
| Supply Voltage Feature | — | 5 V to 18 V |
| Bus Output Pull-Up | — | Internal termination resistors pull LIN bus outputs HIGH |
| Signal Shaping | — | Optimized LIN bus signals designed to minimize electromagnetic emissions |
| Primary Application | — | In-vehicle LIN subnets |
| Rentang Suhu Kerja | — | [DATA_NEEDED: operating temperature range] |
| LIN Transmitter Current | — | [DATA_NEEDED: LIN transmitter current] |
| Receiver Supply Current | — | [DATA_NEEDED: receiver supply current] |
| Transmitter Propagation Delay | — | [DATA_NEEDED: transmitter propagation delay] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| Bus Fault Detection | — | [DATA_NEEDED: LIN bus fault detection functions] |
| REACH Status | — | unknown |