TJA1024HG vs TJA1024HGZ Comparaison
Comparaison détaillée côte à côte de TJA1024HG par NXP Semiconductors et TJA1024HGZ par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | TJA1024HG | TJA1024HGZ |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Unknown |
| Fonction | Quad LIN 2.2A/SAE J2602 transceiver | — |
| Number of LIN Channels | 4 (two independent dual-LIN transceivers) | — |
| Débit de données | Up to 20 kBd | — |
| LIN Compliance | LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602 | — |
| LIN Bus Peak Current | 2.2 A | — |
| Supply Voltage (VBAT) | 5 V to 27 V (load-dump tolerant to 40 V) | — |
| Sleep Mode Current | < 10 uA (typical per dual channel) | — |
| Température de fonctionnement | -40 C to +125 C | — |
| ESD (LIN pin, HBM) | [DATA_NEEDED: HBM ESD value V] | — |
| Boîtier | DHVQFN-24 (SOT815-1), 3.5 x 5.5 mm | 24-DHVQFN, 5.5 mm x 3.5 mm |
| Type de montage | Surface Mount | Surface mount |
| AEC-Q100 | Qualified | — |
| Statut RoHS | Compliant | unknown |
| Software Compatibility | TJA1022, TJA1027, TJA1029 | Compatible with TJA1022, TJA1027, and TJA1029 |
| Nombre de broches | 24 | 24 pins |
| Product Type | — | Quad LIN 2.2A/SAE J2602 transceiver |
| LIN Channel Count | — | 4 channels |
| Maximum LIN Baud Rate | — | 20 kBd |
| LIN Standard Compliance | — | LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602 |
| Supply Voltage Feature | — | 5 V to 18 V |
| Bus Output Pull-Up | — | Internal termination resistors pull LIN bus outputs HIGH |
| Signal Shaping | — | Optimized LIN bus signals designed to minimize electromagnetic emissions |
| Primary Application | — | In-vehicle LIN subnets |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| LIN Transmitter Current | — | [DATA_NEEDED: LIN transmitter current] |
| Receiver Supply Current | — | [DATA_NEEDED: receiver supply current] |
| Transmitter Propagation Delay | — | [DATA_NEEDED: transmitter propagation delay] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| Bus Fault Detection | — | [DATA_NEEDED: LIN bus fault detection functions] |
| REACH Status | — | unknown |