TJA1024HG vs TJA1024HGZ Сравнение
Подробное сравнение бок о бок TJA1024HG от NXP Semiconductors и TJA1024HGZ от NXP Semiconductors. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Сравнение характеристик
| Параметр | TJA1024HG | TJA1024HGZ |
|---|---|---|
| Бренд | NXP Semiconductors | NXP Semiconductors |
| Категория | Interface ICs | Interface ICs |
| Статус жизненного цикла | Активен | Unknown |
| Функция | Quad LIN 2.2A/SAE J2602 transceiver | — |
| Number of LIN Channels | 4 (two independent dual-LIN transceivers) | — |
| Скорость передачи данных | Up to 20 kBd | — |
| LIN Compliance | LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602 | — |
| LIN Bus Peak Current | 2.2 A | — |
| Supply Voltage (VBAT) | 5 V to 27 V (load-dump tolerant to 40 V) | — |
| Sleep Mode Current | < 10 uA (typical per dual channel) | — |
| Рабочая температура | -40 C to +125 C | — |
| ESD (LIN pin, HBM) | [DATA_NEEDED: HBM ESD value V] | — |
| Корпус | DHVQFN-24 (SOT815-1), 3.5 x 5.5 mm | 24-DHVQFN, 5.5 mm x 3.5 mm |
| Тип монтажа | Surface Mount | Surface mount |
| AEC-Q100 | Qualified | — |
| Статус RoHS | Compliant | unknown |
| Software Compatibility | TJA1022, TJA1027, TJA1029 | Compatible with TJA1022, TJA1027, and TJA1029 |
| Количество выводов | 24 | 24 pins |
| Product Type | — | Quad LIN 2.2A/SAE J2602 transceiver |
| LIN Channel Count | — | 4 channels |
| Maximum LIN Baud Rate | — | 20 kBd |
| LIN Standard Compliance | — | LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602 |
| Supply Voltage Feature | — | 5 V to 18 V |
| Bus Output Pull-Up | — | Internal termination resistors pull LIN bus outputs HIGH |
| Signal Shaping | — | Optimized LIN bus signals designed to minimize electromagnetic emissions |
| Primary Application | — | In-vehicle LIN subnets |
| Диапазон рабочих температур | — | [DATA_NEEDED: operating temperature range] |
| LIN Transmitter Current | — | [DATA_NEEDED: LIN transmitter current] |
| Receiver Supply Current | — | [DATA_NEEDED: receiver supply current] |
| Transmitter Propagation Delay | — | [DATA_NEEDED: transmitter propagation delay] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| Bus Fault Detection | — | [DATA_NEEDED: LIN bus fault detection functions] |
| REACH Status | — | unknown |