TLE8082ESXUMA1 - Engine Management PMIC 5V SPI PG-TSDSO-24 | Infineon
MPN: TLE8082ESXUMA1 ✓ AktifTLE8082ESXUMA1 Ringkasan
Engine management PMICs are highly integrated power and driver ICs that combine a microcontroller-compatible supply rail, multiple low-side switches, communication interfaces, and protection features in a single package. They sit at the top of the small-engine ECU power tree, replacing discrete regulators plus discrete MOSFETs and reducing BOM count, PCB area, and quiescent losses. The TLE8082ES family is positioned in Infineon's TLE808x small-engine PMIC lineup.
Key features include integrated 5 V linear or switching supply, four low-side driver outputs for injector or relay control, SPI-configurable diagnostics, and built-in protection such as thermal shutdown, overcurrent limiting, and reverse-battery robustness. The PG-TSDSO-24 exposed pad provides a thermal resistance path that supports sustained operation of the integrated drivers at engine ambient temperatures up to the AEC-Q100 automotive qualification envelope.
Architecturally, the TLE8082ESXUMA1 combines an internal bandgap reference, a pre-regulator, a 5 V post-regulator, four gate drivers for low-side N-channel MOSFETs, and an SPI slave for microcontroller communication. This integration lets a small 32-bit MCU control fuel injection, ignition, and sensor power without auxiliary driver ICs.
Typical applications include small-engine ECUs for motorcycles, scooters, mopeds, marine outboards, generators, and handheld power equipment. The wide VIN range and integrated drivers are tailored to single-cylinder and small-displacement powertrains where PCB area and BOM cost dominate the design.
When designing with this part, ensure the exposed pad is soldered to a sufficient copper pour for thermal relief; sustained low-side driver currents can dissipate significant power. Use the SPI watchdog to detect MCU lockup, and follow Infineon's small-engine reference design for injector flyback sizing.
This page synthesizes distributor stock, parametric specifications, design considerations, and drop-in alternatives that supplement the manufacturer datasheet.
Alternatif penggantian untuk TLE8082ESXUMA1 — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian TLE8082ESXUMA1 (sama faktor bentuk dan footprint) — berbeda di dalam Package, Control Interface, Product Type, Topology.
TLE8082ES
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
TLE8082ESXUMA2
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
TLE8082ESXUMA1 Rating Maksimal & Karakteristik Listrik
| Product Type | Engine Management PMIC |
| Topologi | Integrated 5V supply + 4 low-side drivers + SPI |
| Rentang Tegangan Masukan | 6 V to 40 V |
| Integrated Supply Output | 5 V |
| Number of Low-Side Drivers | 4 |
| Communication Interface | SPI |
| Paket | PG-TSDSO-24 (24-pin TSSOP with exposed pad) |
| Supplier Device Package | PG-TSDSO-24 |
| Tipe Mounting | Surface Mount |
| Operating Temperature Range (Min) | -40 C |
| Status RoHS | Compliant |
| Qualification | AEC-Q100 automotive (per Infineon product page) |
| Lead-Free | Yes |
Konfigurasi Pin TLE8082ESXUMA1
| Pin produk 1 | [DATA_NEEDED: pin 1 function] — Pin function per Infineon datasheet |
| Pin produk 2 | [DATA_NEEDED: pin 2 function] — Pin function per Infineon datasheet |
| Pin produk 3 | [DATA_NEEDED: pin 3 function] — Pin function per Infineon datasheet |
| Pin produk 4 | [DATA_NEEDED: pin 4 function] — Pin function per Infineon datasheet |
| Pin produk 5 | [DATA_NEEDED: pin 5 function] — Pin function per Infineon datasheet |
| Pin produk 6 | [DATA_NEEDED: pin 6 function] — Pin function per Infineon datasheet |
| Pin produk 7 | [DATA_NEEDED: pin 7 function] — Pin function per Infineon datasheet |
| Pin produk 8 | [DATA_NEEDED: pin 8 function] — Pin function per Infineon datasheet |
| Pin produk 9 | [DATA_NEEDED: pin 9 function] — Pin function per Infineon datasheet |
| Pin produk 10 | [DATA_NEEDED: pin 10 function] — Pin function per Infineon datasheet |
| Pin produk 11 | [DATA_NEEDED: pin 11 function] — Pin function per Infineon datasheet |
| Pin produk 12 | [DATA_NEEDED: pin 12 function] — Pin function per Infineon datasheet |
| Pin produk 13 | [DATA_NEEDED: pin 13 function] — Pin function per Infineon datasheet |
| Pin produk 14 | [DATA_NEEDED: pin 14 function] — Pin function per Infineon datasheet |
| Pin produk 15 | [DATA_NEEDED: pin 15 function] — Pin function per Infineon datasheet |
| Pin produk 16 | [DATA_NEEDED: pin 16 function] — Pin function per Infineon datasheet |
| Pin produk 17 | [DATA_NEEDED: pin 17 function] — Pin function per Infineon datasheet |
| Pin produk 18 | [DATA_NEEDED: pin 18 function] — Pin function per Infineon datasheet |
| Pin produk 19 | [DATA_NEEDED: pin 19 function] — Pin function per Infineon datasheet |
| Pin produk 20 | [DATA_NEEDED: pin 20 function] — Pin function per Infineon datasheet |
| Pin produk 21 | [DATA_NEEDED: pin 21 function] — Pin function per Infineon datasheet |
| Pin produk 22 | [DATA_NEEDED: pin 22 function] — Pin function per Infineon datasheet |
| Pin produk 23 | [DATA_NEEDED: pin 23 function] — Pin function per Infineon datasheet |
| Pin produk 24 | [DATA_NEEDED: pin 24 function] — Pin function per Infineon datasheet |
Aplikasi Umum
TLE8082ESXUMA1 cocok untuk 7 aplikasis: Motorcycle ECU Power Management, Small Single-Cylinder Engine Control, Marine Outboard Engine ECU, Scooter and Moped Engine Management, Portable Generator Engine Control, Lawn and Garden Equipment ECU, Two-Wheeler ABS Module.
Motorcycle ECU Power Management
The TLE8082ESXUMA1 is purpose-built for motorcycle and scooter ECUs, where it supplies 5 V to the host MCU and sensor rails while driving four low-side MOSFETs for injector, fuel pump, relay, and lamp control. Its 6 V to 40 V input tolerance covers 12 V battery cranking transients. SPI diagnostics enable OBD-style fault reporting and real-time current monitoring, critical for emission-regulated single- and twin-cylinder engines.
Direkomendasikan
Small Single-Cylinder Engine Control
For handheld power tools, generators, and small single-cylinder engines, the TLE8082ESXUMA1 integrates what would otherwise be three or four discrete ICs: a 5 V regulator, low-side gate drivers, and an SPI-configurable diagnostic block. The PG-TSDSO-24 exposed pad handles thermal dissipation from sustained driver currents. AEC-Q100 qualification ensures reliability under hood-mounted ambient conditions.
Direkomendasikan
Marine Outboard Engine ECU
Marine outboard engines run on 12 V marine batteries with significant load-dump and reverse-polarity stress. The TLE8082ESXUMA1's 6 V to 40 V input envelope, AEC-Q100 qualification, and integrated protection features make it well suited to outboard ECU designs. SPI diagnostics report injector and sensor faults back to the engine management display, supporting NMEA-2000 fault telemetry.
Direkomendasikan
Scooter and Moped Engine Management
Entry-level scooters and mopeds require compact, low-cost ECUs with integrated diagnostics. The TLE8082ESXUMA1's small 24-pin TSSOP footprint, integrated 5 V rail, and SPI programmability cut BOM cost and PCB area. Its low quiescent current helps meet standby-current budgets for vehicles with long parked periods. SPI watchdog detects MCU lockup and safely shuts down actuators.
Direkomendasikan
Portable Generator Engine Control
Portable generators run in harsh environments with wide temperature swings, vibration, and dirty electrical loads. The TLE8082ESXUMA1's AEC-Q100 qualification, integrated 5 V supply, and four low-side drivers handle fuel solenoid, choke, relay, and indicator control from a single IC. SPI diagnostics enable predictive maintenance and fault logging in commercial generator fleets.
Direkomendasikan
Lawn and Garden Equipment ECU
Commercial lawn mowers, leaf blowers, and ride-on tractors increasingly use electronic engine management for emissions compliance. The TLE8082ESXUMA1's integrated 5 V rail and four low-side drivers handle throttle-by-wire, fuel injection, and operator-presence interlays in a compact TSSOP-24 footprint. SPI enables service-tool diagnostics for dealership service networks.
Direkomendasikan
Two-Wheeler ABS Module
Although primarily an engine PMIC, the TLE8082ESXUMA1's 5 V supply, four low-side drivers, and SPI diagnostics are useful as auxiliary rails in motorcycle ABS modules that share the engine harness. The wide 6 V to 40 V input tolerates cranking and load-dump. SPI enables the ABS controller to read fault flags and reset drivers without external glue logic.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk TLE8082ESXUMA1 — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | TLE8082ES | TLE8082ESXUMA2 |
|---|---|---|---|
| Package | PG-TSDSO-24 (TSSOP-24 EP) | PG-TSDSO-24 - same | PG-TSDSO-24 - same |
| Brand | Infineon Technologies | Infineon Technologies - same | Infineon Technologies - same |
| Input Voltage Range | 6 V to 40 V | 6 V to 40 V | 6 V to 40 V |
| Integrated 5V Supply | Yes | Yes | Yes |
| Number of Low-Side Drivers | 4 | 4 | 4 |
| SPI Interface | Yes | Yes | Yes |
| AEC-Q100 Qualification | Yes | Yes | Yes |
| Ordering Code Suffix | XUMA1 (tape/reel 13-inch reel) | No suffix (tray) | XUMA2 (alternate reel) |
Diferensiator Kunci
- Only TLE8082ES variant ships on the 13-inch tape-and-reel form factor as the primary catalog part (vsTLE8082ES (tray))
- Highest volume-distribution ordering code in the Infineon small-engine PMIC family (vsTLE8082ESXUMA2 (alternate reel code))
- Integrated 5V + 4 low-side drivers + SPI in a single 24-pin TSSOP (vsDiscrete LDO + 4 driver ICs solution)
Catatan Desain
The PG-TSDSO-24 exposed pad is the primary thermal path for the four integrated low-side drivers. Estimated: at sustained 4 x 250 mA driver output with 2 V drop across each driver, total dissipation is approximately 2 W. The exposed pad must be soldered to a copper pour of at least 1 square inch (645 mm^2) to keep junction temperature within the AEC-Q100 envelope. Without sufficient copper, thermal shutdown may trigger under continuous load.
Place the input bulk capacitor (>= 47 uF) within 5 mm of the battery pin, and the 5 V output decoupling capacitor (>= 10 uF ceramic + 100 nF) directly at the 5 V pin. The exposed pad must have a continuous top-side solder mask opening and at least 8 thermal vias to the inner/ground plane to maximize heat transfer. Follow Infineon's small-engine reference layout for SPI trace routing to the MCU.
Do not exceed the 40 V absolute maximum input voltage; load-dump transients on a 12 V system can reach 35 V and on 24 V systems up to 60 V. Add an external TVS diode (e.g. 36 V SMBJ) at the battery pin for ISO 7637-2 pulse immunity. Verify SPI mode and clock polarity against the host MCU's configuration during bring-up; mismatched SPI mode causes silent driver faults.
Informasi Konformitas
AEC-Q100 qualified per Infineon TLE8082ES product family. RoHS and REACH compliant per Infineon product page.
