TMP816PWR vs DRV8886PWPR Perbandingan

Perbandingan bersamaan detil TMP816PWR dari Texas Instruments dan DRV8886PWPR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Texas Instruments
TMP816PWR TMP816PWR - 18V Single-Phase BLDC Fan-Motor Predriver | TI

TMP816PWR - 18V Single-Phase BLDC Fan-Motor Predriver | TI

TMP816PWR ✓ Aktif
Texas Instruments
DRV8886PWPR DRV8886PWPR - 37V 2A Bipolar Stepper Driver HTSSOP-24 | TI

DRV8886PWPR - 37V 2A Bipolar Stepper Driver HTSSOP-24 | TI

DRV8886PWPR ✓ Aktif

Perbandingan Spesifikasi

Parameter Umum TMP816PWR DRV8886PWPR
Merek Texas Instruments Texas Instruments
Kategori Motor Drivers Motor Drivers
Status Lingkungan Hidup Aktif Aktif
Topologi Single-phase full-wave BLDC fan predriver —
Supply Voltage (VCC) 6 V to 16 V —
Maximum Supply Voltage 18 V —
Load Voltage 10 V —
Output Current 20 mA (gate drive to external PNP+NMOS) —
Jumlah Output 1 (pre-driver output pair) —
Current Limit Threshold Adjustable (external resistor) —
Rentang Suhu Kerja -30 °C to +95 °C -40 C to +125 C
Control Input PWM speed command —
Tachometer Output FG (frequency-generator) signal —
External Power Stage PNP + N-channel MOSFET pair —
Protection Features Thermal shutdown, adjustable current limit, lock-rotor protection UVLO, OCP, TSD, open-load detect, charge-pump UV
Paket 20-pin TSSOP (PW), 4.40 mm width HTSSOP-24 (PWP) with PowerPAD
Tipe Mounting Surface Mount Surface Mount
Level MSL 1 (unlimited floor life at <30 °C / 85 % RH) —
Status RoHS Compliant Compliant
Lead-Free Yes —
Drive Method Full-wave, sensored (Hall-element input) —
Motor Type — Bipolar stepper (2-phase)
Number of Full H-Bridges — 2
Operating Supply Voltage (VM) — 8 V to 37 V
Absolute Maximum VM — 40 V
Full-Scale Output Current (per phase) — 2 A
RMS Output Current — 1.4 A (24 V, TA = 25 C, PCB-dependent)
Peak Output Current — 3 A
HS + LS On-Resistance (RDSon) — 550 mOhm
Microstepping Levels — Up to 1/16 step
Control Interface — STEP / DIR
Current Sensing — Internal (no external sense resistor)
Decay Modes — 8 configurable modes including Smart Tune
PWM Chopping Frequency — Up to 50 kHz
Sleep Current — 20 uA (typical)
Logic Supply Voltage (VINT) — 3 V to 5.5 V
Fault Output — nFAULT (active-low, open-drain)
AEC-Q100 Qualified — No (use DRV8886ATPWP for automotive)

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon