TMP816PWR vs DRV8886PWPR Karşılaştırma

Ayrıntılı yan yana karşılaştırma TMP816PWR tarafından Texas Instruments ve DRV8886PWPR tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Texas Instruments
TMP816PWR TMP816PWR - 18V Single-Phase BLDC Fan-Motor Predriver | TI

TMP816PWR - 18V Single-Phase BLDC Fan-Motor Predriver | TI

TMP816PWR ✓ Aktif
Texas Instruments
DRV8886PWPR DRV8886PWPR - 37V 2A Bipolar Stepper Driver HTSSOP-24 | TI

DRV8886PWPR - 37V 2A Bipolar Stepper Driver HTSSOP-24 | TI

DRV8886PWPR ✓ Aktif

Özellik Karşılaştırması

Parametre TMP816PWR DRV8886PWPR
Marka Texas Instruments Texas Instruments
Kategori Motor Drivers Motor Drivers
Yaşam Döngüsü Durumu Aktif Aktif
Ağ Yapısı Single-phase full-wave BLDC fan predriver —
Supply Voltage (VCC) 6 V to 16 V —
Maximum Supply Voltage 18 V —
Load Voltage 10 V —
Output Current 20 mA (gate drive to external PNP+NMOS) —
Çıkış Sayısı 1 (pre-driver output pair) —
Current Limit Threshold Adjustable (external resistor) —
İşletim Sıcaklığı Aralığı -30 °C to +95 °C -40 C to +125 C
Control Input PWM speed command —
Tachometer Output FG (frequency-generator) signal —
External Power Stage PNP + N-channel MOSFET pair —
Protection Features Thermal shutdown, adjustable current limit, lock-rotor protection UVLO, OCP, TSD, open-load detect, charge-pump UV
Paket 20-pin TSSOP (PW), 4.40 mm width HTSSOP-24 (PWP) with PowerPAD
Montaj Türü Surface Mount Surface Mount
MSL Seviyesi 1 (unlimited floor life at <30 °C / 85 % RH) —
RoHS Durumu Compliant Compliant
Lead-Free Yes —
Drive Method Full-wave, sensored (Hall-element input) —
Motor Type — Bipolar stepper (2-phase)
Number of Full H-Bridges — 2
Operating Supply Voltage (VM) — 8 V to 37 V
Absolute Maximum VM — 40 V
Full-Scale Output Current (per phase) — 2 A
RMS Output Current — 1.4 A (24 V, TA = 25 C, PCB-dependent)
Peak Output Current — 3 A
HS + LS On-Resistance (RDSon) — 550 mOhm
Microstepping Levels — Up to 1/16 step
Control Interface — STEP / DIR
Current Sensing — Internal (no external sense resistor)
Decay Modes — 8 configurable modes including Smart Tune
PWM Chopping Frequency — Up to 50 kHz
Sleep Current — 20 uA (typical)
Logic Supply Voltage (VINT) — 3 V to 5.5 V
Fault Output — nFAULT (active-low, open-drain)
AEC-Q100 Qualified — No (use DRV8886ATPWP for automotive)

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin