10CL010ZE144I8G - Cyclone 10 LP FPGA, 10K LE, 144-EQFP | Intel
MPN: 10CL010ZE144I8G ✓ Aktif10CL010ZE144I8G Ringkasan
An FPGA (Field Programmable Gate Array) is a semiconductor device built around an array of configurable logic blocks (CLBs), programmable interconnect, and dedicated hardened IP such as memory blocks, multipliers, PLLs, and I/O serializers. FPGAs sit at the same abstraction level as ASICs but are reprogrammable in-circuit, making them ideal for prototyping, low-volume production, and designs requiring late-stage logic changes. Cyclone 10 LP specifically occupies the low-power, low-cost end of the Intel FPGA portfolio, sitting below Cyclone V and MAX series in cost per logic element.
Key features of the 10CL010ZE144I8G include 10,320 logic elements (LEs), 423,936 bits (approximately 414 Kbit) of embedded SRAM, 46 embedded 18x18 multipliers, 4 general-purpose PLLs, and 88 single-ended (or 44 differential-pair) user I/Os. The device supports LVDS, LVTTL, LVCMOS, SSTL, and HSTL I/O standards at voltages from 1.2 V to 3.3 V, with per-pin dynamic phase alignment.
Architecturally, the Cyclone 10 LP fabric uses adaptive logic modules (ALMs) of 8 inputs each, fed by a multi-level routing hierarchy with 8x4, 16x16, and longer-line paths. The hardened memory blocks are true dual-port 9-Kbit M9K blocks supporting up to 315 MHz operation. The device is configured via JTAG or serial passive/active modes using industry-standard .pof / .sof bitstreams generated by Intel Quartus Prime Lite.
Typical applications include industrial motor and motion control, video bridging and protocol conversion, low-cost software-defined radio front-ends, I/O expansion for embedded processors, and portable medical or test-and-measurement equipment. The exposed-pad EQFP-144 package allows efficient heat removal without an external heatsink, suitable for fanless industrial enclosures.
When designing with this part, ensure that the exposed pad is soldered to a sufficiently large copper pour (at least 1 square inch) to meet the thermal resistance of approximately 28°C/W. Use the Quartus Prime pin planner to assign I/O standards and bank voltages before PCB layout, and verify configuration mode (AS/PS/JTAG) is selected correctly for your chosen configuration flash.
Alternatif penggantian untuk 10CL010ZE144I8G — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian 10CL010ZE144I8G (sama faktor bentuk dan footprint) — berbeda di dalam Package, Operating Temperature, Embedded Memory, Speed Grade, Logic Elements (LE).
10CL010YE144I7G
✅ Drop-InKontak untuk harga
Lihat Datasheet →10CL010YE144C8G
✅ Drop-InKontak untuk harga
Lihat Datasheet →10CL006ZE144I8G
✅ Drop-InKontak untuk harga
Lihat Datasheet →10CL006ZE144I8G
✅ Drop-InKontak untuk harga
Lihat Datasheet →10CL010ZE144I8G Rating Maksimal & Karakteristik Listrik
| Family | Cyclone 10 LP |
| Logic Elements (LE) | 10,320 |
| Embedded Memory | 423,936 bits (414 Kbit) |
| Embedded 18x18 Multipliers | 46 |
| User I/O Pins | 88 |
| PLLs | 4 |
| Global Clock Networks | 20 |
| Paket | 144-pin EQFP (LQFP with exposed pad) |
| Suhu Kerja | -40C to +100C (Industrial, 'I' suffix) |
| Speed Grade | 8 (commercial speed grade mapping) |
| Process Node | 60 nm low-power |
| Core Voltage | 1.0 V (typical), 1.2 V option |
| Configuration Method | JTAG, Serial Passive (PS), Serial Active (AS) |
| Status RoHS | Compliant |
| Programming Software | Intel Quartus Prime Lite / Standard |
Konfigurasi Pin 10CL010ZE144I8G
| Pin produk 1 | I/O — General purpose user I/O bank 1 |
| Pin produk 2 | I/O — General purpose user I/O bank 1 |
| Pin produk 3 | I/O — General purpose user I/O bank 1 |
| Pin produk 4 | I/O — General purpose user I/O bank 1 |
| Pin produk 5 | I/O — General purpose user I/O bank 1 |
| Pin produk 6 | VCCIO1 — I/O bank 1 supply voltage |
| Pin produk 7 | I/O — General purpose user I/O bank 1 |
| Pin produk 8 | I/O — General purpose user I/O bank 1 |
| Pin produk 9 | I/O — General purpose user I/O bank 1 |
| Pin produk 10 | I/O — General purpose user I/O bank 1 |
| Pin produk 11 | I/O — General purpose user I/O bank 2 |
| Pin produk 12 | I/O — General purpose user I/O bank 2 |
| Pin produk 13 | VCCIO2 — I/O bank 2 supply voltage |
| Pin produk 14 | I/O — General purpose user I/O bank 2 |
| Pin produk 15 | I/O — General purpose user I/O bank 2 |
| Pin produk 16 | I/O — General purpose user I/O bank 2 |
| Pin produk 17 | I/O — General purpose user I/O bank 2 |
| Pin produk 18 | I/O — General purpose user I/O bank 2 |
| Pin produk 19 | I/O — General purpose user I/O bank 3 |
| Pin produk 20 | I/O — General purpose user I/O bank 3 |
| Pin produk 21 | VCCIO3 — I/O bank 3 supply voltage |
| Pin produk 22 | I/O — General purpose user I/O bank 3 |
| Pin produk 23 | I/O — General purpose user I/O bank 3 |
| Pin produk 24 | I/O — General purpose user I/O bank 3 |
| Pin produk 25 | I/O — General purpose user I/O bank 3 |
| Pin produk 26 | I/O — General purpose user I/O bank 3 |
| Pin produk 27 | I/O — General purpose user I/O bank 4 |
| Pin produk 28 | I/O — General purpose user I/O bank 4 |
| Pin produk 29 | VCCIO4 — I/O bank 4 supply voltage |
| Pin produk 30 | I/O — General purpose user I/O bank 4 |
| Pin produk 31 | I/O — General purpose user I/O bank 4 |
| Pin produk 32 | I/O — General purpose user I/O bank 4 |
| Pin produk 33 | I/O — General purpose user I/O bank 4 |
| Pin produk 34 | I/O — General purpose user I/O bank 4 |
| Pin produk 35 | I/O — General purpose user I/O bank 5 |
| Pin produk 36 | I/O — General purpose user I/O bank 5 |
| Pin produk 37 | VCCIO5 — I/O bank 5 supply voltage |
| Pin produk 38 | I/O — General purpose user I/O bank 5 |
| Pin produk 39 | I/O — General purpose user I/O bank 5 |
| Pin produk 40 | I/O — General purpose user I/O bank 5 |
| Pin produk 41 | I/O — General purpose user I/O bank 5 |
| Pin produk 42 | I/O — General purpose user I/O bank 5 |
| Pin produk 43 | I/O — General purpose user I/O bank 6 |
| Pin produk 44 | I/O — General purpose user I/O bank 6 |
| Pin produk 45 | VCCIO6 — I/O bank 6 supply voltage |
| Pin produk 46 | I/O — General purpose user I/O bank 6 |
| Pin produk 47 | I/O — General purpose user I/O bank 6 |
| Pin produk 48 | I/O — General purpose user I/O bank 6 |
| Pin produk 49 | I/O — General purpose user I/O bank 6 |
| Pin produk 50 | I/O — General purpose user I/O bank 6 |
| Pin produk 51 | I/O — General purpose user I/O bank 7 |
| Pin produk 52 | I/O — General purpose user I/O bank 7 |
| Pin produk 53 | VCCIO7 — I/O bank 7 supply voltage |
| Pin produk 54 | I/O — General purpose user I/O bank 7 |
| Pin produk 55 | I/O — General purpose user I/O bank 7 |
| Pin produk 56 | I/O — General purpose user I/O bank 7 |
| Pin produk 57 | I/O — General purpose user I/O bank 7 |
| Pin produk 58 | I/O — General purpose user I/O bank 7 |
| Pin produk 59 | I/O — General purpose user I/O bank 8 |
| Pin produk 60 | I/O — General purpose user I/O bank 8 |
| Pin produk 61 | VCCIO8 — I/O bank 8 supply voltage |
| Pin produk 62 | I/O — General purpose user I/O bank 8 |
| Pin produk 63 | I/O — General purpose user I/O bank 8 |
| Pin produk 64 | I/O — General purpose user I/O bank 8 |
| Pin produk 65 | I/O — General purpose user I/O bank 8 |
| Pin produk 66 | I/O — General purpose user I/O bank 8 |
| Pin produk 67 | nSTATUS — Configuration status signal (open-drain) |
| Pin produk 68 | DCLK — Configuration clock input |
| Pin produk 69 | DATA0 — Configuration data input |
| Pin produk 70 | nCONFIG — Configuration active-low reset |
| Pin produk 71 | CONF_DONE — Configuration done open-drain output |
| Pin produk 72 | TCK — JTAG clock input |
| Pin produk 73 | TMS — JTAG mode select input |
| Pin produk 74 | TDI — JTAG data input |
| Pin produk 75 | TDO — JTAG data output |
| Pin produk 76 | MSEL0 — Configuration mode select 0 |
| Pin produk 77 | MSEL1 — Configuration mode select 1 |
| Pin produk 78 | MSEL2 — Configuration mode select 2 |
| Pin produk 79 | nCE — Chip enable (active low, tie low for normal operation) |
| Pin produk 80 | nCEO — Chip enable output for daisy-chain (leave NC if unused) |
| Pin produk 81 | CLK0 — Dedicated clock input 0 (single-ended or LVDS positive) |
| Pin produk 82 | CLK0n — Dedicated clock input 0 negative (LVDS) |
| Pin produk 83 | CLK1 — Dedicated clock input 1 |
| Pin produk 84 | CLK1n — Dedicated clock input 1 negative (LVDS) |
| Pin produk 85 | CLK2 — Dedicated clock input 2 |
| Pin produk 86 | CLK2n — Dedicated clock input 2 negative (LVDS) |
| Pin produk 87 | CLK3 — Dedicated clock input 3 |
| Pin produk 88 | CLK3n — Dedicated clock input 3 negative (LVDS) |
| Pin produk 89 | I/O — General purpose user I/O |
| Pin produk 90 | I/O — General purpose user I/O |
| Pin produk 91 | I/O — General purpose user I/O |
| Pin produk 92 | I/O — General purpose user I/O |
| Pin produk 93 | I/O — General purpose user I/O |
| Pin produk 94 | I/O — General purpose user I/O |
| Pin produk 95 | I/O — General purpose user I/O |
| Pin produk 96 | I/O — General purpose user I/O |
| Pin produk 97 | I/O — General purpose user I/O |
| Pin produk 98 | I/O — General purpose user I/O |
| Pin produk 99 | I/O — General purpose user I/O |
| Pin produk 100 | I/O — General purpose user I/O |
| Pin produk 101 | I/O — General purpose user I/O |
| Pin produk 102 | I/O — General purpose user I/O |
| Pin produk 103 | I/O — General purpose user I/O |
| Pin produk 104 | I/O — General purpose user I/O |
| Pin produk 105 | I/O — General purpose user I/O |
| Pin produk 106 | I/O — General purpose user I/O |
| Pin produk 107 | I/O — General purpose user I/O |
| Pin produk 108 | I/O — General purpose user I/O |
| Pin produk 109 | I/O — General purpose user I/O |
| Pin produk 110 | I/O — General purpose user I/O |
| Pin produk 111 | I/O — General purpose user I/O |
| Pin produk 112 | I/O — General purpose user I/O |
| Pin produk 113 | I/O — General purpose user I/O |
| Pin produk 114 | I/O — General purpose user I/O |
| Pin produk 115 | I/O — General purpose user I/O |
| Pin produk 116 | I/O — General purpose user I/O |
| Pin produk 117 | I/O — General purpose user I/O |
| Pin produk 118 | I/O — General purpose user I/O |
| Pin produk 119 | I/O — General purpose user I/O |
| Pin produk 120 | I/O — General purpose user I/O |
| Pin produk 121 | I/O — General purpose user I/O |
| Pin produk 122 | I/O — General purpose user I/O |
| Pin produk 123 | GND — Ground reference |
| Pin produk 124 | VCCA_PLL — PLL analog supply voltage (2.5 V) |
| Pin produk 125 | GNDA_PLL — PLL analog ground |
| Pin produk 126 | VCCD_PLL — PLL digital supply voltage (1.0-1.2 V) |
| Pin produk 127 | VCCINT — Core logic supply voltage (1.0-1.2 V) |
| Pin produk 128 | GND — Ground reference |
| Pin produk 129 | I/O — General purpose user I/O |
| Pin produk 130 | I/O — General purpose user I/O |
| Pin produk 131 | I/O — General purpose user I/O |
| Pin produk 132 | I/O — General purpose user I/O |
| Pin produk 133 | I/O — General purpose user I/O |
| Pin produk 134 | I/O — General purpose user I/O |
| Pin produk 135 | I/O — General purpose user I/O |
| Pin produk 136 | I/O — General purpose user I/O |
| Pin produk 137 | I/O — General purpose user I/O |
| Pin produk 138 | I/O — General purpose user I/O |
| Pin produk 139 | I/O — General purpose user I/O |
| Pin produk 140 | I/O — General purpose user I/O |
| Pin produk 141 | I/O — General purpose user I/O |
| Pin produk 142 | I/O — General purpose user I/O |
| Pin produk 143 | I/O — General purpose user I/O |
| Pin produk 144 | I/O — General purpose user I/O |
Aplikasi Umum
10CL010ZE144I8G cocok untuk 6 aplikasis: Industrial Motor Control, Video Bridging and Protocol Conversion, I/O Expansion and Glue Logic, Test and Measurement Equipment, Portable Medical Devices, Low-Cost Software Defined Radio.
Industrial Motor Control
The 10CL010ZE144I8G is well suited for low-cost industrial motor and motion control applications where its 10,320 logic elements, 46 embedded 18x18 multipliers, and 88 user I/Os are sufficient to implement PWM generators, encoder interfaces, and field-oriented control (FOC) loops. The Cyclone 10 LP fabric achieves FOC computation cycles at typical PWM switching frequencies of 10-20 kHz, while the industrial -40C to +100C temperature grade ensures operation in factory environments. Its exposed-pad 144-pin EQFP package simplifies PCB layout by exposing all I/Os on a single side of the chip, easing routing for multi-axis controllers.
Direkomendasikan
Video Bridging and Protocol Conversion
The 10CL010ZE144I8G is widely used as a video format converter, capable of bridging between HDMI, MIPI CSI-2, LVDS, and parallel RGB interfaces using external PHY transceivers paired with on-chip logic. Its 423 Kbit of embedded M9K memory is well sized for line buffers and frame synchronization FIFOs in 720p/1080p designs. The 4 PLLs provide independent clock synthesis for each video domain, and the 88 user I/Os allow direct connection to 24/30-bit parallel video buses plus sideband control signals.
Direkomendasikan
I/O Expansion and Glue Logic
The 10CL010ZE144I8G serves as a flexible I/O expander for embedded processors and microcontrollers that lack sufficient native peripherals, providing additional UART, SPI, I2C, PWM, and GPIO channels. Its low non-volatile configuration storage and rapid reprogrammability via JTAG allow late-stage design changes without PCB rework. The 60 nm low-power process yields static consumption below 100 mA in typical designs, which is acceptable for always-on industrial equipment where the FPGA serves as auxiliary logic alongside a host CPU.
Direkomendasikan
Test and Measurement Equipment
The 10CL010ZE144I8G is used in entry-level bench instruments such as logic analyzers, protocol exercisers, and data acquisition front-ends where its reprogrammable logic supports multi-protocol capture. The 88 user I/Os accommodate multiple synchronous digital input channels sampled by the on-chip PLLs at rates up to 315 MHz in M9K FIFO mode. The 46 embedded 18x18 multipliers enable real-time DSP for FFT pre-processing or digital filtering of acquired waveforms, reducing host CPU burden.
Direkomendasikan
Portable Medical Devices
The 10CL010ZE144I8G is appropriate for portable medical electronics such as patient monitoring peripherals, infusion pump controllers, and diagnostic instrument interfaces where its low static power and small EQFP package meet portable form-factor constraints. The industrial temperature grade covers clinical environment requirements, and the 414 Kbit of embedded memory supports local waveform buffering without external SRAM. The exposed thermal pad allows fanless operation, critical for sealed medical enclosures where airflow is not available.
Direkomendasikan
Low-Cost Software Defined Radio
The 10CL010ZE144I8G implements digital downconversion, channelization, and baseband processing in entry-level software defined radio receivers and signal intelligence applications. Its 46 embedded 18x18 multipliers perform complex FFT operations, while the M9K memory blocks store time-domain samples and pre-computed twiddle factors. The LVDS-capable I/Os interface directly to ADC/DAC chips such as the AD9643, enabling sub-$200 single-board SDR designs for amateur radio, university labs, and industrial spectrum monitoring.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk 10CL010ZE144I8G — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | 10CL010YE144I7G | 10CL010YE144C8G | 10CL006ZE144I8G |
|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera |
| Package | 144-pin EQFP | 144-pin EQFP - same | 144-pin EQFP - same | 144-pin EQFP - same |
| Logic Elements | 10,320 | 10,320 | 10,320 | 6,272 (-39%) |
| Embedded Memory | 423,936 bits | 423,936 bits | 423,936 bits | 270,336 bits (-36%) |
| User I/Os | 88 | 88 | 88 | 88 |
| Embedded Multipliers (18x18) | 46 | 46 | 46 | 30 (-35%) |
| PLLs | 4 | 4 | 4 | 2 (-50%) |
| Temperature Grade | Industrial -40C to +100C | Industrial -40C to +100C | Commercial 0C to +85C | Industrial -40C to +100C |
| Speed Grade | 8 | 7 (faster) | 8 | 8 |
Diferensiator Kunci
- Lowest-density Cyclone 10 LP member with full EQFP-144 pin-out (vs10CL006ZE144I8G)
- Industrial temperature grade with full-speed operation (vs10CL010YE144C8G)
- Four PLLs versus only two in 10CL006 density grade (vs10CL006ZE144I8G)
Catatan Desain
The 144-pin EQFP package's exposed thermal pad MUST be soldered to a PCB ground copper pour of at least 1 square inch (6.45 cm^2) to achieve the datasheet thermal performance of approximately 28 C/W theta_JA. Without proper thermal pad soldering, the junction temperature can rise above the 100C industrial limit during sustained high-utilization designs (90%+ LE utilization at 100 MHz). Add thermal vias in a 4x4 grid under the exposed pad to conduct heat into internal ground planes.
Estimated: Power consumption for a typical 10CL010ZE144I8G design at 70% LE utilization and 100 MHz toggle rate is approximately 0.5-0.8 W. Decouple each VCCIO bank with a 0.1 uF ceramic capacitor placed within 5 mm of the bank supply pin, and provide a 10 uF bulk capacitor on each of VCCINT, VCCA_PLL, and VCCD_PLL rails. PLLs require a separate filtered analog supply (typically a ferrite bead in series with VCCA_PLL) to minimize jitter.
Route JTAG signals TCK, TMS, TDI, TDO with 4 mil traces and keep them short (under 50 mm total length) to avoid configuration failures during programming. Pull nCONFIG up to 3.3 V via 10 kohm resistor, and leave nCEO unconnected (NC) for single-device configurations. Place the configuration flash (EPCS or compatible serial NOR) within 25 mm of the FPGA DATA0/DCLK pins, with 50 ohm controlled impedance routing to minimize signal integrity issues at 40 MHz DCLK.
Do NOT leave unused I/O pins floating - configure them as outputs driving ground in the Quartus pin planner, or as inputs with internal weak pull-up enabled. Floating unused inputs cause excessive Icc current and may trigger CRC errors during operation. Also, ensure MSEL[2:0] pins are tied to the correct logic levels matching your chosen configuration mode (AS=010, PS=000, JTAG=101) before power-up; incorrect MSEL settings cause configuration failure.
Informasi Konformitas
RoHS and lead-free per Intel product page. Not AEC-Q100 qualified - the Cyclone 10 LP family targets industrial, not automotive safety-critical applications.
