Intel

10M40DCF484C8G - MAX 10 FPGA, 40K LE, 484-FBGA | Intel / Altera

MPN: 10M40DCF484C8G ✓ Aktif

484-FBGA (F484) Package C8 Speed 1290240 Memory

Ajukan Diskon

MOQ: 1 |

Lihat Datasheet (PDF) Lihat Alternatif

Kuantitas

10M40DCF484C8G Ringkasan

The Intel / Altera 10M40DCF484C8G is a MAX 10 field-programmable gate array (FPGA) in the 484-pin fine-pitch BGA (F484) package, integrating 40,000 logic elements, 1,290,240 bits of embedded SRAM, and 360 user I/Os. Built on TSMC's low-power 55 nm embedded flash process, this non-volatile FPGA requires no external configuration memory and supports instant-on operation from its internal flash. Per the MAX 10 FPGA datasheet, this variant is the C8 speed grade with a commercial temperature rating, suitable for industrial and consumer designs where single-chip integration is paramount.

What is a non-volatile FPGA? A non-volatile FPGA, in the broader taxonomy of programmable logic devices (PLDs), retains its configuration in on-chip flash memory. This contrasts with SRAM-based FPGAs (such as older Altera Cyclone or Xilinx 7-series families) that require an external boot PROM and lose their configuration on power-down. The MAX 10 family belongs to Intel's programmable logic hierarchy: PLD -> CPLD/FPGA -> non-volatile FPGA -> MAX 10. By integrating configuration storage, ADCs, and DSP blocks onto a single die, MAX 10 devices simplify board design, reduce BOM cost, and accelerate time-to-market versus competing SRAM-based solutions.

Key features of the 10M40DCF484C8G include an on-die 12-bit analog-to-digital converter (ADC) supporting up to 17 analog inputs, dedicated hardware multipliers (DSP blocks) for fixed- and floating-point arithmetic, and an embedded Nios II soft processor compatibility layer. The device also integrates phase-locked loops (PLLs) for clock management, internal flash memory for user data and configuration, and supports the LVDS, LVTTL, and LVCMOS I/O standards at rates suitable for industrial control and video bridging.

Architecturally, the MAX 10 die is divided into logic array blocks (LABs), embedded memory blocks (M9K), DSP blocks (18x18 multipliers), and a periphery of GPIO banks. The 484-FBGA package exposes 360 general-purpose I/Os to the PCB and supports the commercial junction temperature range with appropriate derating. Internal flash can be partitioned for user data storage, enabling the device to replace a small microcontroller plus glue logic on a single chip.

Typical applications include industrial motor control, factory automation I/O expansion, video interface bridging (display port to RGB), portable medical instrumentation, and low-volume ASIC replacement. The instant-on capability also makes it attractive in aerospace and defense subsystems where deterministic boot latency is required. Compared to discrete microcontrollers, the MAX 10 provides deterministic parallel logic and high-speed custom I/O timing that software-driven MCUs cannot match.

When designing with this part, pay attention to the BGA fanout: the 1 mm pitch 484-FBGA demands HDI PCB stack-ups with microvias for reliable assembly. Decoupling, PLL power filtering, and JTAG chain integrity must follow the Intel MAX 10 hardware design guidelines to avoid signal-integrity issues.

This page synthesizes distributor stock, datasheet parameters, and same-family drop-in alternatives across the MAX 10 line, providing practical engineering context not consolidated in any single manufacturer document.

Alternatif penggantian untuk 10M40DCF484C8G — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian 10M40DCF484C8G (sama faktor bentuk dan footprint) — berbeda di dalam Package, Speed Grade, Process Technology, Configuration Memory, Embedded Memory (bits).

10M16DCF484C8G

Intel

Package: 484-FBGA

Speed Grade: C8 (commercial, 8 speed grade)

Process Technology: 55 nm