5M570ZE64I5N - 570 LE MAX V CPLD, 64-EQFP | Intel
MPN: 5M570ZE64I5N ✓ Aktif5M570ZE64I5N Ringkasan
What is a CPLD? A Complex Programmable Logic Device is a non-volatile, instant-on programmable logic device that combines the predictability of an ASIC with the flexibility of an FPGA but with deterministic timing and lower unit cost at small volumes. In the broader programmable-logic taxonomy, the MAX V family sits between simple PLDs (PAL/GAL) and larger SRAM-based FPGAs, optimized for high I/O count, fast pin-to-pin propagation delay, and ultra-low standby power.
Key features of the 5M570ZE64I5N include a maximum propagation delay tpd(1) of 9 ns, an internal core voltage of 1.71 V to 1.89 V (typically 1.8 V), and in-system programmability via JTAG. The device uses a flash-based configuration memory, so it behaves like an ASIC at power-up with no external boot PROM required. Its MultiVolt core supports I/O interfacing to 1.5 V, 1.8 V, 2.5 V, 3.3 V, and other standards through bank-based VCCIO supplies.
Architecturally, the 5M570ZE64I5N integrates the Logic Array Blocks (LABs), a global interconnect matrix, and a flash configuration block into a single die. Each LAB contains ten Logic Elements (LEs), and each LE contains a 4-input look-up table, a programmable register, and a chainable carry path for fast arithmetic. This gives the device the equivalent of roughly 32Kbits of usable user flash and 8 Kbits of user SRAM, supporting on-chip state machines and micro-sequencer designs.
Typical applications for the 5M570ZE64I5N include I/O expansion and voltage-level translation in industrial controllers, bus-bridging glue logic between microcontrollers and peripherals, power-sequencer / supervisory state machines in server and telecom boards, and field-programmable interface bridging (UART, SPI, I2C, parallel buses) for legacy upgrades.
When designing with the 5M570ZE64I5N, observe the EQFP-64 thermal pad PCB layout requirement: stitch the exposed pad to a solid ground plane with multiple thermal vias. Decoupling of 100 nF next to every VCCIO/VCCINT pin plus a 10 uF bulk cap near the device is recommended by the MAX V handbook for stable operation.
This page synthesizes distributor pricing, drop-in alternatives drawn from the same MAX V family, and practical PCB design notes not found in the manufacturer datasheet alone, giving engineers a single source for sourcing and design decisions.
Alternatif penggantian untuk 5M570ZE64I5N — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian 5M570ZE64I5N (sama faktor bentuk dan footprint) — berbeda di dalam Package, Programming Interface, Configuration Memory, Operating Temperature, Logic Elements.
5M570ZE64I5
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
5M570ZE64C5N
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
5M160ZE64I5N
✅ Drop-InKontak untuk harga
Lihat Datasheet →5M240ZM68I5N
✅ Drop-InKontak untuk harga
Lihat Datasheet →5M1270ZT144C5N
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →5M2210ZF256C5N
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →5M570ZE64I5N Rating Maksimal & Karakteristik Listrik
| Series | MAX V |
| Programmable Type | In System Programmable |
| Number of Logic Elements / Blocks | 570 |
| Number of Macrocells | 440 |
| Number of User I/O | 54 |
| Propagation Delay tpd(1) Max | 9 ns |
| Internal Supply Voltage VCCINT | 1.71 V to 1.89 V (1.8 V typical) |
| Rentang Suhu Kerja | -40 C to +100 C (TJ) |
| Tipe Mounting | Surface Mount |
| Paket / Case | 64-TQFP Exposed Pad (EQFP-64) |
| Supplier Device Package | 64-EQFP (7x7 mm) |
| Configuration Memory | Non-volatile Flash |
| Programmable I/O Voltage Standards | 1.5 V / 1.8 V / 2.5 V / 3.3 V (MultiVolt I/O) |
| Programming Interface | JTAG (IEEE 1149.1) |
| Status RoHS | Compliant |
| Lead-Free | Yes |
Konfigurasi Pin 5M570ZE64I5N
| Pin produk 1 | I/O — User I/O pin (Bank 1) |
| Pin produk 2 | I/O — User I/O pin (Bank 1) |
| Pin produk 3 | I/O — User I/O pin (Bank 1) |
| Pin produk 4 | I/O — User I/O pin (Bank 1) |
| Pin produk 5 | I/O — User I/O pin (Bank 1) |
| Pin produk 6 | I/O — User I/O pin (Bank 1) |
| Pin produk 7 | I/O — User I/O pin (Bank 1) |
| Pin produk 8 | I/O — User I/O pin (Bank 1) |
| Pin produk 9 | GND — Ground |
| Pin produk 10 | I/O — User I/O pin (Bank 1) |
| Pin produk 11 | I/O — User I/O pin (Bank 1) |
| Pin produk 12 | I/O — User I/O pin (Bank 1) |
| Pin produk 13 | I/O — User I/O pin (Bank 1) |
| Pin produk 14 | I/O — User I/O pin (Bank 1) |
| Pin produk 15 | VCCIO1 — Bank 1 I/O supply voltage |
| Pin produk 16 | I/O — User I/O pin (Bank 1) |
| Pin produk 17 | I/O — User I/O pin (Bank 1) |
| Pin produk 18 | I/O — User I/O pin (Bank 1) |
| Pin produk 19 | I/O — User I/O pin (Bank 1) |
| Pin produk 20 | I/O — User I/O pin (Bank 1) |
| Pin produk 21 | I/O — User I/O pin (Bank 1) |
| Pin produk 22 | I/O — User I/O pin (Bank 1) |
| Pin produk 23 | I/O — User I/O pin (Bank 1) |
| Pin produk 24 | I/O — User I/O pin (Bank 1) |
| Pin produk 25 | I/O — User I/O pin (Bank 1) |
| Pin produk 26 | I/O — User I/O pin (Bank 1) |
| Pin produk 27 | GND — Ground |
| Pin produk 28 | I/O — User I/O pin (Bank 2) |
| Pin produk 29 | I/O — User I/O pin (Bank 2) |
| Pin produk 30 | I/O — User I/O pin (Bank 2) |
| Pin produk 31 | I/O — User I/O pin (Bank 2) |
| Pin produk 32 | VCCIO2 — Bank 2 I/O supply voltage |
| Pin produk 33 | I/O — User I/O pin (Bank 2) |
| Pin produk 34 | I/O — User I/O pin (Bank 2) |
| Pin produk 35 | I/O — User I/O pin (Bank 2) |
| Pin produk 36 | I/O — User I/O pin (Bank 2) |
| Pin produk 37 | I/O — User I/O pin (Bank 2) |
| Pin produk 38 | I/O — User I/O pin (Bank 2) |
| Pin produk 39 | I/O — User I/O pin (Bank 2) |
| Pin produk 40 | TDI — JTAG Test Data In |
| Pin produk 41 | TMS — JTAG Test Mode Select |
| Pin produk 42 | TCK — JTAG Test Clock |
| Pin produk 43 | GND — Ground |
| Pin produk 44 | TDO — JTAG Test Data Out |
| Pin produk 45 | nCONFIG — Configuration control (pull high for normal operation) |
| Pin produk 46 | nSTATUS — Configuration status (open-drain) |
| Pin produk 47 | CONF_DONE — Configuration done indicator (open-drain) |
| Pin produk 48 | I/O — User I/O pin (Bank 2) |
| Pin produk 49 | I/O — User I/O pin (Bank 2) |
| Pin produk 50 | I/O — User I/O pin (Bank 2) |
| Pin produk 51 | I/O — User I/O pin (Bank 2) |
| Pin produk 52 | I/O — User I/O pin (Bank 2) |
| Pin produk 53 | VCCINT — Core supply voltage (1.8 V) |
| Pin produk 54 | I/O — User I/O pin (Bank 2) |
| Pin produk 55 | I/O — User I/O pin (Bank 2) |
| Pin produk 56 | I/O — User I/O pin (Bank 2) |
| Pin produk 57 | I/O — User I/O pin (Bank 2) |
| Pin produk 58 | GND — Ground |
| Pin produk 59 | I/O — User I/O pin (Bank 2) |
| Pin produk 60 | I/O — User I/O pin (Bank 2) |
| Pin produk 61 | I/O — User I/O pin (Bank 2) |
| Pin produk 62 | I/O — User I/O pin (Bank 2) |
| Pin produk 63 | I/O — User I/O pin (Bank 2) |
| Pin produk 64 | I/O — User I/O pin (Bank 2) |
Aplikasi Umum
5M570ZE64I5N cocok untuk 6 aplikasis: Industrial I/O Expansion and Voltage Translation, Bus Bridge / Glue Logic for Microcontroller Systems, Power-Sequencer / Supervisory State Machine, LED Display Driver and Multiplexer, Legacy Interface Adapter / Protocol Converter, Test & Measurement Front-End Logic.
Industrial I/O Expansion and Voltage Translation
The 5M570ZE64I5N's 54 user I/O across flexible MultiVoltage banks (1.5/1.8/2.5/3.3 V) make it ideal for expanding microcontroller GPIO counts and translating between mixed-voltage domains in industrial PLCs and motor-control boards. Its 9 ns pin-to-pin propagation delay is fast enough to bridge asynchronous 1 MHz SPI buses without timing closure issues, while the non-volatile flash configuration means the translation map is locked in at power-on with no boot time. The -40 C to +100 C industrial temperature range survives cabinet and outdoor factory environments.
Direkomendasikan
Bus Bridge / Glue Logic for Microcontroller Systems
As glue logic between an ARM microcontroller and legacy parallel peripherals (FPGA configuration buses, SRAM/Flash, LCD panels), the 5M570ZE64I5N's 440 macrocells can decode complex chip-select maps and implement bus-arbitration state machines. The in-system programmability via JTAG means engineers can iterate bus-protocol fixes without re-spinning the PCB, while 9 ns combinatorial latency is more than adequate for 50-100 MHz equivalent bus cycles. CPLDs are deterministic where FPGAs would add boot latency, so the MAX V part often replaces an FPGA entirely in cost-sensitive glue roles.
Direkomendasikan
Power-Sequencer / Supervisory State Machine
For server, telecom, and ATX-style power-supervisor designs, the 5M570ZE64I5N's deterministic 9 ns delay and instant-on flash memory make it ideal as the master power-sequencer that drives PG (power-good) signals and ENABLE pins across 8-12 rails. Each macrocell can host a rail's enable latch and timing logic, with 440 macrocells handling typical 8-rail sequences plus redundancy and fault-recovery state. The -40 to +100 C industrial temperature grade and exposed-pad 64-EQFP thermal performance are proven in continuous-operation telecom shelves.
Direkomendasikan
LED Display Driver and Multiplexer
The 5M570ZE64I5N drives large LED walls, dot-matrix signs, and seven-segment multiplex displays by combining PWM generation, row/column scanning, and brightness-control state machines in a single low-power device. With 54 I/O and 9 ns delay, the CPLD can refresh up to 32-row multiplexed displays at >1 kHz per row with zero software overhead, freeing the host MCU for content. The 1.8 V core with 3.3 V-tolerant I/O also lets it interface directly to modern LED-driver ICs without level shifters.
Direkomendasikan
Legacy Interface Adapter / Protocol Converter
The 5M570ZE64I5N is widely used to bridge legacy interfaces (UART, SPI, I2C, parallel ports) to modern processors, where the CPLD handles protocol conversion, byte-level buffering, and voltage translation. The 570-LE capacity easily absorbs dual UART-to-SPI bridges plus GPIO expansion, while the deterministic 9 ns timing preserves serial-frame integrity at full baud rates up to several Mbaud. Non-volatile flash programming means the bridge boots in microseconds with no firmware updates required in the field.
Direkomendasikan
Test & Measurement Front-End Logic
For oscilloscope, logic-analyzer, and bench-instrument front-ends, the 5M570ZE64I5N's 9 ns delay supports high-speed channel switching, trigger-arm logic, and pattern generation at sub-100 MHz rates. The 54 I/O pins accommodate 16-channel multiplexer banks with margin for status LEDs and control lines. The 64-EQFP package with exposed pad simplifies thermal management in continuous-duty bench instruments that sit powered for hours, and the -40 to +100 C temperature range handles lab-to-warehouse thermal cycling.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk 5M570ZE64I5N — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | 5M570ZE64I5 | 5M570ZE64C5N | 5M160ZE64I5N | 5M1270ZT144C5N | 5M2210ZF256C5N |
|---|---|---|---|---|---|---|
| Package | 64-EQFP (7x7 mm) | 64-EQFP (7x7 mm) - same | 64-EQFP (7x7 mm) - same | 64-EQFP (7x7 mm) - same | 144-TQFP (different) | 256-BGA (different) |
| Brand | Intel (formerly Altera) | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 570 | 570 | 570 | 160 (-72%) | 1270 (+123%) | 2210 (+288%) |
| Macrocells | 440 | 440 | 440 | 128 | 980 | 1700 |
| Operating Temperature | -40 C to +100 C (Industrial) | 0 C to +85 C (Commercial) | 0 C to +85 C (Commercial) | -40 C to +100 C (Industrial) | 0 C to +85 C (Commercial) | 0 C to +85 C (Commercial) |
| Configuration Memory | Non-volatile Flash | Non-volatile Flash | Non-volatile Flash | Non-volatile Flash | Non-volatile Flash | Non-volatile Flash |
Diferensiator Kunci
- Mid-density MAX V CPLD with full industrial temperature range (vs5M160ZE64I5N)
- 64-EQFP small footprint vs larger 100/144-TQFP MAX V options (vs5M1270ZT144C5N)
- Non-volatile flash configuration vs SRAM-based FPGAs (vsCyclone-series Intel FPGAs)
Catatan Desain
The 64-EQFP package exposes a thermal pad on the underside that MUST be soldered to a ground plane with at least 9 thermal vias in a 3x3 array (0.3 mm via drill, 0.6 mm pad) for proper heat dissipation and ground reference. Skipping the thermal pad connection will cause intermittent JTAG failures and 5-10 C higher junction temperature under continuous I/O switching. Place the 100 nF decoupling caps within 2 mm of every VCCINT and VCCIO pin, plus one 10 uF bulk cap near each voltage rail input.
Drive 64-EQFP outputs with a series 33 ohm damping resistor when traces exceed 25 mm or when the I/O toggles above 50 MHz, to suppress reflections on the JTAG and clock pins. Keep clock, JTAG, and global reset traces on the same layer as the device with a continuous ground return path. The MAX V 9 ns propagation delay assumes a 50 pF load; de-rate by 0.5 ns per additional 25 pF when driving long cables or large LED matrices.
Do not leave nCONFIG floating - tie it through a 10 kohm pull-up to VCCIO2. Without a proper pull-up, the CPLD may fail to enter user mode after power-up and the CONF_DONE pin will stay low. Also confirm VCCINT (1.8 V) is stable before VCCIO banks ramp; a 1 ms VCCINT-before-VCCIO sequence is recommended to prevent I/O latch-up. When programming via JTAG, ensure TCK is clean - a noisy JTAG clock is the #1 cause of verification failures on MAX V devices.
Informasi Konformitas
RoHS-compliant per Intel MAX V family product page. AEC-Q100 not applicable (industrial-grade CPLD, not automotive-qualified). Halogen-free status not explicitly stated in distributor data; refer to Intel declaration for confirmation.
