5M570ZE64I5N - 570 LE MAX V CPLD, 64-EQFP | Intel
N.º da peça: 5M570ZE64I5N ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $10.45 | $10,45 |
| 10 | $9.85 | $98,50 |
| 100 | $8.92 | $892,00 |
| 500 | $8.05 | $4.025,00 |
| 1.000 | $7.2 | $7.200,00 |
5M570ZE64I5N Visão geral
What is a CPLD? A Complex Programmable Logic Device is a non-volatile, instant-on programmable logic device that combines the predictability of an ASIC with the flexibility of an FPGA but with deterministic timing and lower unit cost at small volumes. In the broader programmable-logic taxonomy, the MAX V family sits between simple PLDs (PAL/GAL) and larger SRAM-based FPGAs, optimized for high I/O count, fast pin-to-pin propagation delay, and ultra-low standby power.
Key features of the 5M570ZE64I5N include a maximum propagation delay tpd(1) of 9 ns, an internal core voltage of 1.71 V to 1.89 V (typically 1.8 V), and in-system programmability via JTAG. The device uses a flash-based configuration memory, so it behaves like an ASIC at power-up with no external boot PROM required. Its MultiVolt core supports I/O interfacing to 1.5 V, 1.8 V, 2.5 V, 3.3 V, and other standards through bank-based VCCIO supplies.
Architecturally, the 5M570ZE64I5N integrates the Logic Array Blocks (LABs), a global interconnect matrix, and a flash configuration block into a single die. Each LAB contains ten Logic Elements (LEs), and each LE contains a 4-input look-up table, a programmable register, and a chainable carry path for fast arithmetic. This gives the device the equivalent of roughly 32Kbits of usable user flash and 8 Kbits of user SRAM, supporting on-chip state machines and micro-sequencer designs.
Typical applications for the 5M570ZE64I5N include I/O expansion and voltage-level translation in industrial controllers, bus-bridging glue logic between microcontrollers and peripherals, power-sequencer / supervisory state machines in server and telecom boards, and field-programmable interface bridging (UART, SPI, I2C, parallel buses) for legacy upgrades.
When designing with the 5M570ZE64I5N, observe the EQFP-64 thermal pad PCB layout requirement: stitch the exposed pad to a solid ground plane with multiple thermal vias. Decoupling of 100 nF next to every VCCIO/VCCINT pin plus a 10 uF bulk cap near the device is recommended by the MAX V handbook for stable operation.
This page synthesizes distributor pricing, drop-in alternatives drawn from the same MAX V family, and practical PCB design notes not found in the manufacturer datasheet alone, giving engineers a single source for sourcing and design decisions.
Alternativas drop-in para 5M570ZE64I5N — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com 5M570ZE64I5N (mesmo formato e footprint) — diferindo em Package, Programming Interface, Configuration Memory, Operating Temperature, Logic Elements.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
5M570ZE64I5
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
5M570ZE64C5N
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
5M160ZE64I5N
✅ Drop-In✓ Em estoque
$4.13 / unidade
Ver ficha técnica →5M240ZM68I5N
✅ Drop-In✓ Em estoque
$1.25 / unidade
Ver ficha técnica →5M1270ZT144C5N
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$12.45 / unidade
Ver ficha técnica →5M2210ZF256C5N
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$11.95 / unidade
Ver ficha técnica →5M570ZE64I5N Classificações máximas e características elétricas
| Series | MAX V |
| Programmable Type | In System Programmable |
| Number of Logic Elements / Blocks | 570 |
| Number of Macrocells | 440 |
| Number of User I/O | 54 |
| Propagation Delay tpd(1) Max | 9 ns |
| Internal Supply Voltage VCCINT | 1.71 V to 1.89 V (1.8 V typical) |
| Faixa de temperatura de operação | -40 C to +100 C (TJ) |
| Tipo de montagem | Surface Mount |
| Encapsulamento / Caixa | 64-TQFP Exposed Pad (EQFP-64) |
| Supplier Device Package | 64-EQFP (7x7 mm) |
| Configuration Memory | Non-volatile Flash |
| Programmable I/O Voltage Standards | 1.5 V / 1.8 V / 2.5 V / 3.3 V (MultiVolt I/O) |
| Programming Interface | JTAG (IEEE 1149.1) |
| Status RoHS | Compliant |
| Lead-Free | Yes |
Configuração de pinos do 5M570ZE64I5N
| Pino 1 | I/O — User I/O pin (Bank 1) |
| Pino 2 | I/O — User I/O pin (Bank 1) |
| Pino 3 | I/O — User I/O pin (Bank 1) |
| Pino 4 | I/O — User I/O pin (Bank 1) |
| Pino 5 | I/O — User I/O pin (Bank 1) |
| Pino 6 | I/O — User I/O pin (Bank 1) |
| Pino 7 | I/O — User I/O pin (Bank 1) |
| Pino 8 | I/O — User I/O pin (Bank 1) |
| Pino 9 | GND — Ground |
| Pino 10 | I/O — User I/O pin (Bank 1) |
| Pino 11 | I/O — User I/O pin (Bank 1) |
| Pino 12 | I/O — User I/O pin (Bank 1) |
| Pino 13 | I/O — User I/O pin (Bank 1) |
| Pino 14 | I/O — User I/O pin (Bank 1) |
| Pino 15 | VCCIO1 — Bank 1 I/O supply voltage |
| Pino 16 | I/O — User I/O pin (Bank 1) |
| Pino 17 | I/O — User I/O pin (Bank 1) |
| Pino 18 | I/O — User I/O pin (Bank 1) |
| Pino 19 | I/O — User I/O pin (Bank 1) |
| Pino 20 | I/O — User I/O pin (Bank 1) |
| Pino 21 | I/O — User I/O pin (Bank 1) |
| Pino 22 | I/O — User I/O pin (Bank 1) |
| Pino 23 | I/O — User I/O pin (Bank 1) |
| Pino 24 | I/O — User I/O pin (Bank 1) |
| Pino 25 | I/O — User I/O pin (Bank 1) |
| Pino 26 | I/O — User I/O pin (Bank 1) |
| Pino 27 | GND — Ground |
| Pino 28 | I/O — User I/O pin (Bank 2) |
| Pino 29 | I/O — User I/O pin (Bank 2) |
| Pino 30 | I/O — User I/O pin (Bank 2) |
| Pino 31 | I/O — User I/O pin (Bank 2) |
| Pino 32 | VCCIO2 — Bank 2 I/O supply voltage |
| Pino 33 | I/O — User I/O pin (Bank 2) |
| Pino 34 | I/O — User I/O pin (Bank 2) |
| Pino 35 | I/O — User I/O pin (Bank 2) |
| Pino 36 | I/O — User I/O pin (Bank 2) |
| Pino 37 | I/O — User I/O pin (Bank 2) |
| Pino 38 | I/O — User I/O pin (Bank 2) |
| Pino 39 | I/O — User I/O pin (Bank 2) |
| Pino 40 | TDI — JTAG Test Data In |
| Pino 41 | TMS — JTAG Test Mode Select |
| Pino 42 | TCK — JTAG Test Clock |
| Pino 43 | GND — Ground |
| Pino 44 | TDO — JTAG Test Data Out |
| Pino 45 | nCONFIG — Configuration control (pull high for normal operation) |
| Pino 46 | nSTATUS — Configuration status (open-drain) |
| Pino 47 | CONF_DONE — Configuration done indicator (open-drain) |
| Pino 48 | I/O — User I/O pin (Bank 2) |
| Pino 49 | I/O — User I/O pin (Bank 2) |
| Pino 50 | I/O — User I/O pin (Bank 2) |
| Pino 51 | I/O — User I/O pin (Bank 2) |
| Pino 52 | I/O — User I/O pin (Bank 2) |
| Pino 53 | VCCINT — Core supply voltage (1.8 V) |
| Pino 54 | I/O — User I/O pin (Bank 2) |
| Pino 55 | I/O — User I/O pin (Bank 2) |
| Pino 56 | I/O — User I/O pin (Bank 2) |
| Pino 57 | I/O — User I/O pin (Bank 2) |
| Pino 58 | GND — Ground |
| Pino 59 | I/O — User I/O pin (Bank 2) |
| Pino 60 | I/O — User I/O pin (Bank 2) |
| Pino 61 | I/O — User I/O pin (Bank 2) |
| Pino 62 | I/O — User I/O pin (Bank 2) |
| Pino 63 | I/O — User I/O pin (Bank 2) |
| Pino 64 | I/O — User I/O pin (Bank 2) |
Aplicações típicas
5M570ZE64I5N é adequado para 6 aplicaçãos: Industrial I/O Expansion and Voltage Translation, Bus Bridge / Glue Logic for Microcontroller Systems, Power-Sequencer / Supervisory State Machine, LED Display Driver and Multiplexer, Legacy Interface Adapter / Protocol Converter, Test & Measurement Front-End Logic.
Industrial I/O Expansion and Voltage Translation
The 5M570ZE64I5N's 54 user I/O across flexible MultiVoltage banks (1.5/1.8/2.5/3.3 V) make it ideal for expanding microcontroller GPIO counts and translating between mixed-voltage domains in industrial PLCs and motor-control boards. Its 9 ns pin-to-pin propagation delay is fast enough to bridge asynchronous 1 MHz SPI buses without timing closure issues, while the non-volatile flash configuration means the translation map is locked in at power-on with no boot time. The -40 C to +100 C industrial temperature range survives cabinet and outdoor factory environments.
Recomendado
Bus Bridge / Glue Logic for Microcontroller Systems
As glue logic between an ARM microcontroller and legacy parallel peripherals (FPGA configuration buses, SRAM/Flash, LCD panels), the 5M570ZE64I5N's 440 macrocells can decode complex chip-select maps and implement bus-arbitration state machines. The in-system programmability via JTAG means engineers can iterate bus-protocol fixes without re-spinning the PCB, while 9 ns combinatorial latency is more than adequate for 50-100 MHz equivalent bus cycles. CPLDs are deterministic where FPGAs would add boot latency, so the MAX V part often replaces an FPGA entirely in cost-sensitive glue roles.
Recomendado
Power-Sequencer / Supervisory State Machine
For server, telecom, and ATX-style power-supervisor designs, the 5M570ZE64I5N's deterministic 9 ns delay and instant-on flash memory make it ideal as the master power-sequencer that drives PG (power-good) signals and ENABLE pins across 8-12 rails. Each macrocell can host a rail's enable latch and timing logic, with 440 macrocells handling typical 8-rail sequences plus redundancy and fault-recovery state. The -40 to +100 C industrial temperature grade and exposed-pad 64-EQFP thermal performance are proven in continuous-operation telecom shelves.
Recomendado
LED Display Driver and Multiplexer
The 5M570ZE64I5N drives large LED walls, dot-matrix signs, and seven-segment multiplex displays by combining PWM generation, row/column scanning, and brightness-control state machines in a single low-power device. With 54 I/O and 9 ns delay, the CPLD can refresh up to 32-row multiplexed displays at >1 kHz per row with zero software overhead, freeing the host MCU for content. The 1.8 V core with 3.3 V-tolerant I/O also lets it interface directly to modern LED-driver ICs without level shifters.
Recomendado
Legacy Interface Adapter / Protocol Converter
The 5M570ZE64I5N is widely used to bridge legacy interfaces (UART, SPI, I2C, parallel ports) to modern processors, where the CPLD handles protocol conversion, byte-level buffering, and voltage translation. The 570-LE capacity easily absorbs dual UART-to-SPI bridges plus GPIO expansion, while the deterministic 9 ns timing preserves serial-frame integrity at full baud rates up to several Mbaud. Non-volatile flash programming means the bridge boots in microseconds with no firmware updates required in the field.
Recomendado
Test & Measurement Front-End Logic
For oscilloscope, logic-analyzer, and bench-instrument front-ends, the 5M570ZE64I5N's 9 ns delay supports high-speed channel switching, trigger-arm logic, and pattern generation at sub-100 MHz rates. The 54 I/O pins accommodate 16-channel multiplexer banks with margin for status LEDs and control lines. The 64-EQFP package with exposed pad simplifies thermal management in continuous-duty bench instruments that sit powered for hours, and the -40 to +100 C temperature range handles lab-to-warehouse thermal cycling.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para 5M570ZE64I5N — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | 5M570ZE64I5 | 5M570ZE64C5N | 5M160ZE64I5N | 5M1270ZT144C5N | 5M2210ZF256C5N |
|---|---|---|---|---|---|---|
| Package | 64-EQFP (7x7 mm) | 64-EQFP (7x7 mm) - same | 64-EQFP (7x7 mm) - same | 64-EQFP (7x7 mm) - same | 144-TQFP (different) | 256-BGA (different) |
| Brand | Intel (formerly Altera) | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 570 | 570 | 570 | 160 (-72%) | 1270 (+123%) | 2210 (+288%) |
| Macrocells | 440 | 440 | 440 | 128 | 980 | 1700 |
| Operating Temperature | -40 C to +100 C (Industrial) | 0 C to +85 C (Commercial) | 0 C to +85 C (Commercial) | -40 C to +100 C (Industrial) | 0 C to +85 C (Commercial) | 0 C to +85 C (Commercial) |
| Configuration Memory | Non-volatile Flash | Non-volatile Flash | Non-volatile Flash | Non-volatile Flash | Non-volatile Flash | Non-volatile Flash |
Principais diferenciais
- Mid-density MAX V CPLD with full industrial temperature range (vs 5M160ZE64I5N)
- 64-EQFP small footprint vs larger 100/144-TQFP MAX V options (vs 5M1270ZT144C5N)
- Non-volatile flash configuration vs SRAM-based FPGAs (vs Cyclone-series Intel FPGAs)
Notas de projeto
The 64-EQFP package exposes a thermal pad on the underside that MUST be soldered to a ground plane with at least 9 thermal vias in a 3x3 array (0.3 mm via drill, 0.6 mm pad) for proper heat dissipation and ground reference. Skipping the thermal pad connection will cause intermittent JTAG failures and 5-10 C higher junction temperature under continuous I/O switching. Place the 100 nF decoupling caps within 2 mm of every VCCINT and VCCIO pin, plus one 10 uF bulk cap near each voltage rail input.
Drive 64-EQFP outputs with a series 33 ohm damping resistor when traces exceed 25 mm or when the I/O toggles above 50 MHz, to suppress reflections on the JTAG and clock pins. Keep clock, JTAG, and global reset traces on the same layer as the device with a continuous ground return path. The MAX V 9 ns propagation delay assumes a 50 pF load; de-rate by 0.5 ns per additional 25 pF when driving long cables or large LED matrices.
Do not leave nCONFIG floating - tie it through a 10 kohm pull-up to VCCIO2. Without a proper pull-up, the CPLD may fail to enter user mode after power-up and the CONF_DONE pin will stay low. Also confirm VCCINT (1.8 V) is stable before VCCIO banks ramp; a 1 ms VCCINT-before-VCCIO sequence is recommended to prevent I/O latch-up. When programming via JTAG, ensure TCK is clean - a noisy JTAG clock is the #1 cause of verification failures on MAX V devices.
Informações de conformidade
RoHS-compliant per Intel MAX V family product page. AEC-Q100 not applicable (industrial-grade CPLD, not automotive-qualified). Halogen-free status not explicitly stated in distributor data; refer to Intel declaration for confirmation.
