5M570ZE64I5N - 570 LE MAX V CPLD, 64-EQFP | Intel
Référence : 5M570ZE64I5N ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $10.45 | $10,45 |
| 10 | $9.85 | $98,50 |
| 100 | $8.92 | $892,00 |
| 500 | $8.05 | $4 025,00 |
| 1 000 | $7.2 | $7 200,00 |
5M570ZE64I5N Présentation
What is a CPLD? A Complex Programmable Logic Device is a non-volatile, instant-on programmable logic device that combines the predictability of an ASIC with the flexibility of an FPGA but with deterministic timing and lower unit cost at small volumes. In the broader programmable-logic taxonomy, the MAX V family sits between simple PLDs (PAL/GAL) and larger SRAM-based FPGAs, optimized for high I/O count, fast pin-to-pin propagation delay, and ultra-low standby power.
Key features of the 5M570ZE64I5N include a maximum propagation delay tpd(1) of 9 ns, an internal core voltage of 1.71 V to 1.89 V (typically 1.8 V), and in-system programmability via JTAG. The device uses a flash-based configuration memory, so it behaves like an ASIC at power-up with no external boot PROM required. Its MultiVolt core supports I/O interfacing to 1.5 V, 1.8 V, 2.5 V, 3.3 V, and other standards through bank-based VCCIO supplies.
Architecturally, the 5M570ZE64I5N integrates the Logic Array Blocks (LABs), a global interconnect matrix, and a flash configuration block into a single die. Each LAB contains ten Logic Elements (LEs), and each LE contains a 4-input look-up table, a programmable register, and a chainable carry path for fast arithmetic. This gives the device the equivalent of roughly 32Kbits of usable user flash and 8 Kbits of user SRAM, supporting on-chip state machines and micro-sequencer designs.
Typical applications for the 5M570ZE64I5N include I/O expansion and voltage-level translation in industrial controllers, bus-bridging glue logic between microcontrollers and peripherals, power-sequencer / supervisory state machines in server and telecom boards, and field-programmable interface bridging (UART, SPI, I2C, parallel buses) for legacy upgrades.
When designing with the 5M570ZE64I5N, observe the EQFP-64 thermal pad PCB layout requirement: stitch the exposed pad to a solid ground plane with multiple thermal vias. Decoupling of 100 nF next to every VCCIO/VCCINT pin plus a 10 uF bulk cap near the device is recommended by the MAX V handbook for stable operation.
This page synthesizes distributor pricing, drop-in alternatives drawn from the same MAX V family, and practical PCB design notes not found in the manufacturer datasheet alone, giving engineers a single source for sourcing and design decisions.
Alternatives de remplacement direct pour 5M570ZE64I5N — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec 5M570ZE64I5N (même facteur de forme et même empreinte) — différant par Package, Programming Interface, Configuration Memory, Operating Temperature, Logic Elements.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
5M570ZE64I5
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
5M570ZE64C5N
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
5M160ZE64I5N
✅ Remplacement direct✓ En stock
$4.13 / unité
Voir la fiche technique →5M240ZM68I5N
✅ Remplacement direct✓ En stock
$1.25 / unité
Voir la fiche technique →5M1270ZT144C5N
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$12.45 / unité
Voir la fiche technique →5M2210ZF256C5N
✅ Remplacement direct ⚠️ Spécifications non vérifiées✓ En stock
$11.95 / unité
Voir la fiche technique →5M570ZE64I5N Valeurs maximales et caractéristiques électriques
| Series | MAX V |
| Programmable Type | In System Programmable |
| Number of Logic Elements / Blocks | 570 |
| Number of Macrocells | 440 |
| Number of User I/O | 54 |
| Propagation Delay tpd(1) Max | 9 ns |
| Internal Supply Voltage VCCINT | 1.71 V to 1.89 V (1.8 V typical) |
| Plage de température de fonctionnement | -40 C to +100 C (TJ) |
| Type de montage | Surface Mount |
| Boîtier / Format | 64-TQFP Exposed Pad (EQFP-64) |
| Supplier Device Package | 64-EQFP (7x7 mm) |
| Configuration Memory | Non-volatile Flash |
| Programmable I/O Voltage Standards | 1.5 V / 1.8 V / 2.5 V / 3.3 V (MultiVolt I/O) |
| Programming Interface | JTAG (IEEE 1149.1) |
| Statut RoHS | Compliant |
| Lead-Free | Yes |
Configuration des broches de 5M570ZE64I5N
| Broche 1 | I/O — User I/O pin (Bank 1) |
| Broche 2 | I/O — User I/O pin (Bank 1) |
| Broche 3 | I/O — User I/O pin (Bank 1) |
| Broche 4 | I/O — User I/O pin (Bank 1) |
| Broche 5 | I/O — User I/O pin (Bank 1) |
| Broche 6 | I/O — User I/O pin (Bank 1) |
| Broche 7 | I/O — User I/O pin (Bank 1) |
| Broche 8 | I/O — User I/O pin (Bank 1) |
| Broche 9 | GND — Ground |
| Broche 10 | I/O — User I/O pin (Bank 1) |
| Broche 11 | I/O — User I/O pin (Bank 1) |
| Broche 12 | I/O — User I/O pin (Bank 1) |
| Broche 13 | I/O — User I/O pin (Bank 1) |
| Broche 14 | I/O — User I/O pin (Bank 1) |
| Broche 15 | VCCIO1 — Bank 1 I/O supply voltage |
| Broche 16 | I/O — User I/O pin (Bank 1) |
| Broche 17 | I/O — User I/O pin (Bank 1) |
| Broche 18 | I/O — User I/O pin (Bank 1) |
| Broche 19 | I/O — User I/O pin (Bank 1) |
| Broche 20 | I/O — User I/O pin (Bank 1) |
| Broche 21 | I/O — User I/O pin (Bank 1) |
| Broche 22 | I/O — User I/O pin (Bank 1) |
| Broche 23 | I/O — User I/O pin (Bank 1) |
| Broche 24 | I/O — User I/O pin (Bank 1) |
| Broche 25 | I/O — User I/O pin (Bank 1) |
| Broche 26 | I/O — User I/O pin (Bank 1) |
| Broche 27 | GND — Ground |
| Broche 28 | I/O — User I/O pin (Bank 2) |
| Broche 29 | I/O — User I/O pin (Bank 2) |
| Broche 30 | I/O — User I/O pin (Bank 2) |
| Broche 31 | I/O — User I/O pin (Bank 2) |
| Broche 32 | VCCIO2 — Bank 2 I/O supply voltage |
| Broche 33 | I/O — User I/O pin (Bank 2) |
| Broche 34 | I/O — User I/O pin (Bank 2) |
| Broche 35 | I/O — User I/O pin (Bank 2) |
| Broche 36 | I/O — User I/O pin (Bank 2) |
| Broche 37 | I/O — User I/O pin (Bank 2) |
| Broche 38 | I/O — User I/O pin (Bank 2) |
| Broche 39 | I/O — User I/O pin (Bank 2) |
| Broche 40 | TDI — JTAG Test Data In |
| Broche 41 | TMS — JTAG Test Mode Select |
| Broche 42 | TCK — JTAG Test Clock |
| Broche 43 | GND — Ground |
| Broche 44 | TDO — JTAG Test Data Out |
| Broche 45 | nCONFIG — Configuration control (pull high for normal operation) |
| Broche 46 | nSTATUS — Configuration status (open-drain) |
| Broche 47 | CONF_DONE — Configuration done indicator (open-drain) |
| Broche 48 | I/O — User I/O pin (Bank 2) |
| Broche 49 | I/O — User I/O pin (Bank 2) |
| Broche 50 | I/O — User I/O pin (Bank 2) |
| Broche 51 | I/O — User I/O pin (Bank 2) |
| Broche 52 | I/O — User I/O pin (Bank 2) |
| Broche 53 | VCCINT — Core supply voltage (1.8 V) |
| Broche 54 | I/O — User I/O pin (Bank 2) |
| Broche 55 | I/O — User I/O pin (Bank 2) |
| Broche 56 | I/O — User I/O pin (Bank 2) |
| Broche 57 | I/O — User I/O pin (Bank 2) |
| Broche 58 | GND — Ground |
| Broche 59 | I/O — User I/O pin (Bank 2) |
| Broche 60 | I/O — User I/O pin (Bank 2) |
| Broche 61 | I/O — User I/O pin (Bank 2) |
| Broche 62 | I/O — User I/O pin (Bank 2) |
| Broche 63 | I/O — User I/O pin (Bank 2) |
| Broche 64 | I/O — User I/O pin (Bank 2) |
Applications typiques
5M570ZE64I5N convient pour 6 applications: Industrial I/O Expansion and Voltage Translation, Bus Bridge / Glue Logic for Microcontroller Systems, Power-Sequencer / Supervisory State Machine, LED Display Driver and Multiplexer, Legacy Interface Adapter / Protocol Converter, Test & Measurement Front-End Logic.
Industrial I/O Expansion and Voltage Translation
The 5M570ZE64I5N's 54 user I/O across flexible MultiVoltage banks (1.5/1.8/2.5/3.3 V) make it ideal for expanding microcontroller GPIO counts and translating between mixed-voltage domains in industrial PLCs and motor-control boards. Its 9 ns pin-to-pin propagation delay is fast enough to bridge asynchronous 1 MHz SPI buses without timing closure issues, while the non-volatile flash configuration means the translation map is locked in at power-on with no boot time. The -40 C to +100 C industrial temperature range survives cabinet and outdoor factory environments.
Recommandé
Bus Bridge / Glue Logic for Microcontroller Systems
As glue logic between an ARM microcontroller and legacy parallel peripherals (FPGA configuration buses, SRAM/Flash, LCD panels), the 5M570ZE64I5N's 440 macrocells can decode complex chip-select maps and implement bus-arbitration state machines. The in-system programmability via JTAG means engineers can iterate bus-protocol fixes without re-spinning the PCB, while 9 ns combinatorial latency is more than adequate for 50-100 MHz equivalent bus cycles. CPLDs are deterministic where FPGAs would add boot latency, so the MAX V part often replaces an FPGA entirely in cost-sensitive glue roles.
Recommandé
Power-Sequencer / Supervisory State Machine
For server, telecom, and ATX-style power-supervisor designs, the 5M570ZE64I5N's deterministic 9 ns delay and instant-on flash memory make it ideal as the master power-sequencer that drives PG (power-good) signals and ENABLE pins across 8-12 rails. Each macrocell can host a rail's enable latch and timing logic, with 440 macrocells handling typical 8-rail sequences plus redundancy and fault-recovery state. The -40 to +100 C industrial temperature grade and exposed-pad 64-EQFP thermal performance are proven in continuous-operation telecom shelves.
Recommandé
LED Display Driver and Multiplexer
The 5M570ZE64I5N drives large LED walls, dot-matrix signs, and seven-segment multiplex displays by combining PWM generation, row/column scanning, and brightness-control state machines in a single low-power device. With 54 I/O and 9 ns delay, the CPLD can refresh up to 32-row multiplexed displays at >1 kHz per row with zero software overhead, freeing the host MCU for content. The 1.8 V core with 3.3 V-tolerant I/O also lets it interface directly to modern LED-driver ICs without level shifters.
Recommandé
Legacy Interface Adapter / Protocol Converter
The 5M570ZE64I5N is widely used to bridge legacy interfaces (UART, SPI, I2C, parallel ports) to modern processors, where the CPLD handles protocol conversion, byte-level buffering, and voltage translation. The 570-LE capacity easily absorbs dual UART-to-SPI bridges plus GPIO expansion, while the deterministic 9 ns timing preserves serial-frame integrity at full baud rates up to several Mbaud. Non-volatile flash programming means the bridge boots in microseconds with no firmware updates required in the field.
Recommandé
Test & Measurement Front-End Logic
For oscilloscope, logic-analyzer, and bench-instrument front-ends, the 5M570ZE64I5N's 9 ns delay supports high-speed channel switching, trigger-arm logic, and pattern generation at sub-100 MHz rates. The 54 I/O pins accommodate 16-channel multiplexer banks with margin for status LEDs and control lines. The 64-EQFP package with exposed pad simplifies thermal management in continuous-duty bench instruments that sit powered for hours, and the -40 to +100 C temperature range handles lab-to-warehouse thermal cycling.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour 5M570ZE64I5N — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | 5M570ZE64I5 | 5M570ZE64C5N | 5M160ZE64I5N | 5M1270ZT144C5N | 5M2210ZF256C5N |
|---|---|---|---|---|---|---|
| Package | 64-EQFP (7x7 mm) | 64-EQFP (7x7 mm) - same | 64-EQFP (7x7 mm) - same | 64-EQFP (7x7 mm) - same | 144-TQFP (different) | 256-BGA (different) |
| Brand | Intel (formerly Altera) | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 570 | 570 | 570 | 160 (-72%) | 1270 (+123%) | 2210 (+288%) |
| Macrocells | 440 | 440 | 440 | 128 | 980 | 1700 |
| Operating Temperature | -40 C to +100 C (Industrial) | 0 C to +85 C (Commercial) | 0 C to +85 C (Commercial) | -40 C to +100 C (Industrial) | 0 C to +85 C (Commercial) | 0 C to +85 C (Commercial) |
| Configuration Memory | Non-volatile Flash | Non-volatile Flash | Non-volatile Flash | Non-volatile Flash | Non-volatile Flash | Non-volatile Flash |
Principaux différenciateurs
- Mid-density MAX V CPLD with full industrial temperature range (vs 5M160ZE64I5N)
- 64-EQFP small footprint vs larger 100/144-TQFP MAX V options (vs 5M1270ZT144C5N)
- Non-volatile flash configuration vs SRAM-based FPGAs (vs Cyclone-series Intel FPGAs)
Notes de conception
The 64-EQFP package exposes a thermal pad on the underside that MUST be soldered to a ground plane with at least 9 thermal vias in a 3x3 array (0.3 mm via drill, 0.6 mm pad) for proper heat dissipation and ground reference. Skipping the thermal pad connection will cause intermittent JTAG failures and 5-10 C higher junction temperature under continuous I/O switching. Place the 100 nF decoupling caps within 2 mm of every VCCINT and VCCIO pin, plus one 10 uF bulk cap near each voltage rail input.
Drive 64-EQFP outputs with a series 33 ohm damping resistor when traces exceed 25 mm or when the I/O toggles above 50 MHz, to suppress reflections on the JTAG and clock pins. Keep clock, JTAG, and global reset traces on the same layer as the device with a continuous ground return path. The MAX V 9 ns propagation delay assumes a 50 pF load; de-rate by 0.5 ns per additional 25 pF when driving long cables or large LED matrices.
Do not leave nCONFIG floating - tie it through a 10 kohm pull-up to VCCIO2. Without a proper pull-up, the CPLD may fail to enter user mode after power-up and the CONF_DONE pin will stay low. Also confirm VCCINT (1.8 V) is stable before VCCIO banks ramp; a 1 ms VCCINT-before-VCCIO sequence is recommended to prevent I/O latch-up. When programming via JTAG, ensure TCK is clean - a noisy JTAG clock is the #1 cause of verification failures on MAX V devices.
Informations de conformité
RoHS-compliant per Intel MAX V family product page. AEC-Q100 not applicable (industrial-grade CPLD, not automotive-qualified). Halogen-free status not explicitly stated in distributor data; refer to Intel declaration for confirmation.
