Analog Devices

AD741JN - 1MHz Single Op Amp in 8-PDIP | Analog Devices

MPN: AD741JN ✓ Aktif
5,000 uV Vdss 8-pin PDIP Package
MOQ: 1 |

AD741JN Ringkasan

The Analog Devices AD741JN is a high-performance, internally compensated, general-purpose operational amplifier packaged in an 8-pin PDIP. It provides a 1 MHz gain-bandwidth product, up to 5,000 uV of input offset voltage, full short-circuit protection, and one amplifier circuit per package. The AD741J is a selected accuracy version of the standard AD741 family, making it suitable for conventional analog signal conditioning where economical precision and reliable operation are required.

An operational amplifier, or op amp, is a high-gain analog building block used to amplify voltage differences, buffer inputs, integrate signals, and implement active filters. Within the broader semiconductor hierarchy, the AD741 belongs to the operational-amplifier category, which is part of analog signal-chain ICs and the wider semiconductor family. Unlike a passive resistor divider, an op amp uses active feedback to create stable gain and improve signal impedance behavior.

The AD741 series combines monolithic construction, internal compensation, and short-circuit protection. Its 1 MHz gain-bandwidth product permits useful closed-loop operation at moderate frequencies when compared with precision instrumentation amplifiers or much higher-speed operational amplifiers. The selected AD741J grade is intended to improve accuracy relative to the standard AD741C while retaining the familiar AD741 architecture and an 8-pin PDIP footprint.

Internal compensation removes the need for an external compensation network in ordinary closed-loop configurations, simplifying analog board design. Full short-circuit protection helps the output withstand overload conditions, although correct supply voltage, output loading, and thermal design remain essential. Offset null terminals permit practical input-offset adjustment where precision at zero or near-zero input is more important than the cost of additional external components.

Typical uses include low-frequency audio preamplification, instrumentation signal conditioning, active feedback and error-amplifier circuits, analog sensor interfaces, and educational or laboratory amplifier designs. The monolithic operational-amplifier architecture is especially useful when a system requires more accuracy and stability than a basic transistor stage but does not need the bandwidth or noise performance of a modern precision amplifier.

For a new board, verify the power-supply range, input common-mode range, output swing, offset limits, drift, noise, and operating-temperature limits against the Analog Devices AD741 datasheet before fixing the surrounding component values. The 8-pin PDIP is easy to prototype and socket, although a modern surface-mount operational amplifier may be preferable for space-constrained production designs.

This page combines the manufacturer-defined AD741 capabilities with a practical comparison against identified PDIP-8 alternatives. It highlights package reuse, bandwidth, offset-voltage differences, and design trade-offs so engineers can distinguish a genuine drop-in substitution from a merely similar amplifier before modifying a circuit board.

Alternatif penggantian untuk AD741JN — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian AD741JN (sama faktor bentuk dan footprint).

AD741KN

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 8-pin PDIP
Same 8-pin PDIP AD741 architecture; the K accuracy grade changes the offset specification from the J grade's 5,000 uV maximum, with the exact K limit requiring confirmation

📋 Alternatif referensi (tidak dalam katalog)

UA741AN

✅ Drop-In
📦 8-pin PDIP
Matches the published 1 MHz bandwidth and 5,000 uV maximum offset voltage; other bias-current, drift, noise, and common-mode limits require circuit-level comparison

📋 Alternatif referensi (tidak dalam katalog)

UA748MJG

✅ Drop-In
📦 8-pin PDIP
Identified as a PDIP-8 functional alternative with approximately 1 MHz bandwidth; the AD741JN's published maximum offset is 5,000 uV and the UA748 offset limit must be confirmed

📋 Alternatif referensi (tidak dalam katalog)

TL061BCN

✅ Drop-In
📦 8-pin PDIP
Identified as a PDIP-8, approximately 1 MHz functional alternative; input bias current, offset voltage, noise, and supply limits differ from the AD741JN and require verification

📋 Alternatif referensi (tidak dalam katalog)

AD741HN

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 8-pin PDIP
Same AD741 8-pin PDIP family and 1 MHz bandwidth; the H accuracy grade changes offset limits from the J grade's 5,000 uV maximum, with the exact H limit requiring confirmation

📋 Alternatif referensi (tidak dalam katalog)

AD741JN Rating Maksimal & Karakteristik Listrik

Amplifier Type General-purpose operational amplifier
Number of Amplifier Circuits 1 circuit
Gain-Bandwidth Product 1 MHz
Maximum Input Offset Voltage 5,000 uV
Compensation Internal
Short-Circuit Protection Full
Construction Monolithic
Package Type 8-pin PDIP
Tipe Mounting Through-hole
Status RoHS Compliant

Konfigurasi Pin AD741JN

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
Pin produk 1 OFFSET NULL — Offset-voltage adjustment terminal
Pin produk 2 INVERTING INPUT — Inverting input terminal
Pin produk 3 NONINVERTING INPUT — Non-inverting input terminal
Pin produk 4 V- — Negative supply voltage terminal
Pin produk 5 OFFSET NULL — Offset-voltage adjustment terminal
Pin produk 6 OUTPUT — Amplifier output terminal
Pin produk 7 V+ — Positive supply voltage terminal
Pin produk 8 NC — Not connected

Aplikasi Umum

AD741JN cocok untuk 6 aplikasis: Low-Frequency Audio Preamplifier, Sensor Signal Conditioning, Active Audio Filter, Industrial Control Feedback Amplifier, Precision Measurement Buffer, Educational and Laboratory Amplifier.

🎧

Low-Frequency Audio Preamplifier

The AD741JN fits low-frequency audio preamplifier stages where a 1 MHz gain-bandwidth product, internal compensation, and full short-circuit protection provide a practical combination of function and simplicity. Connect pin 3 to the signal source, use pin 2 for inverting feedback, and take the amplified output from pin 6. Because the AD741JN can have up to 5,000 uV of input offset, use the offset-null pins when DC output accuracy matters. This is particularly useful for line-level preamplification, small audio-mixer stages, and educational signal-chain designs.

🧩

Sensor Signal Conditioning

The AD741JN can condition low-bandwidth sensor signals when the design needs a straightforward 8-pin PDIP amplifier rather than a complex precision signal chain. Its 1 MHz gain-bandwidth product supports moderate closed-loop gains, while the monolithic construction and internal compensation simplify feedback implementation. Place the sensor near the non-inverting input, return the reference input to the signal ground through the intended bias network, and bypass the supply pins close to the IC. The 5,000 uV maximum offset should be included in the error budget for high-gain measurements.

🔧

Active Audio Filter

The AD741JN is appropriate for first-order or modest higher-order active-filter prototypes operating well below its 1 MHz gain-bandwidth product. Internal compensation eliminates an external compensation network in conventional closed-loop configurations, while full short-circuit protection adds robustness around audio and control paths. Build the filter around the inverting and non-inverting inputs at pins 2 and 3, and route the filtered signal from pin 6. Validate resistor accuracy, output loading, and stable operating gain because practical filter performance also depends on passive-component tolerances.

🏭

Industrial Control Feedback Amplifier

The AD741JN can serve as an error or feedback amplifier in a low-bandwidth industrial control system when its supply, common-mode, and output-swing limits satisfy the operating range. The 1 MHz gain-bandwidth product is suitable for many slow feedback loops, and full short-circuit protection helps the output survive transient overloads. Keep the compensation and feedback components close to the relevant pins, provide local supply bypassing, and route high-current output loads separately from sensitive analog returns. Validate stability across temperature and supply tolerance before deploying it as a system feedback element.

🖥️

Precision Measurement Buffer

The AD741JN can buffer a low-frequency measurement node when the circuit does not require the very low offset and drift of a dedicated instrumentation amplifier. Its monolithic construction, internal compensation, and 1 MHz gain-bandwidth product support unity-gain buffering and moderate closed-loop gain. Use the pin 3 input as the high-impedance signal entry, pin 2 for feedback, and pin 6 to drive the next stage. Account for the maximum 5,000 uV input offset in precision calculations and confirm the source impedance remains within the amplifier's bias-current and common-mode constraints.

🔬

Educational and Laboratory Amplifier

The AD741JN is well suited to educational, prototyping, and general laboratory amplifier circuits because its 8-pin PDIP package is easy to install and socket. Students can use the standard inverting and non-inverting arrangements while exploring gain, bandwidth, offset adjustment, and feedback. The 1 MHz gain-bandwidth product provides a useful upper limit when calculating closed-loop response, and the selected AD741J grade helps distinguish it from the standard AD741C. Include output-load, supply-rail, and common-mode checks to prevent incorrect laboratory hookups from damaging the amplifier.

Ringkasan Produk Direkomendasikan

AD741JN Analog Devices Digunakan di dalam: Low-Frequency Audio Preamplifier, Sensor Signal Conditioning, Active Audio Filter, Industrial Control Feedback Amplifier, Precision Measurement Buffer, Educational and Laboratory Amplifier AD741KN selected-accuracy AD741-family amplifier Digunakan di dalam: Low-Frequency Audio Preamplifier, Precision Measurement Buffer AD741HN AD741-family precision alternative Digunakan di dalam: Sensor Signal Conditioning UA741AN 8-pin PDIP amplifier alternative Digunakan di dalam: Active Audio Filter TL061BCN 8-pin PDIP functional alternative Digunakan di dalam: Industrial Control Feedback Amplifier UA748MJG 8-pin PDIP functional alternative Digunakan di dalam: Educational and Laboratory Amplifier
What is the AD741JN?
The AD741JN is an Analog Devices single general-purpose operational amplifier in an 8-pin PDIP package. According to the Analog Devices AD741 datasheet, the series uses monolithic construction, internal compensation, and full short-circuit protection. The AD741J grade is a specially tested and selected version of the standard AD741 amplifier, providing enhanced precision performance for general analog signal-conditioning applications.
What are the key specifications of AD741JN?
The principal AD741JN specifications include a 1 MHz gain-bandwidth product, 5,000 uV maximum input offset voltage, one amplifier circuit, internal compensation, and an 8-pin PDIP package. The Analog Devices AD741 datasheet also identifies the device as a monolithic operational amplifier with full short-circuit protection. Review the datasheet for supply-voltage and temperature limits before finalizing a design.
Where can I download the AD741JN datasheet PDF?
The official AD741JN datasheet PDF is available from Analog Devices at the product data-sheet URL listed on this page. The document covers the AD741 series, including the AD741J selected version. Use the manufacturer's pin-description table and electrical-characteristics tables when assigning supply rails, selecting external resistors, and confirming offset-voltage limits for AD741JN.
Where can I find the AD741JN pinout?
The AD741JN uses a conventional 8-pin PDIP operational-amplifier pinout. Pin 2 is the inverting input, pin 3 is the non-inverting input, pin 4 is the negative supply, pin 6 is the output, and pin 7 is the positive supply. Pins 1 and 5 are offset null, while pin 8 is not connected. Confirm assignments against the Analog Devices AD741 datasheet.
What is the gain-bandwidth product of AD741JN?
The AD741JN has a 1 MHz gain-bandwidth product. This means its approximate closed-loop bandwidth changes according to the selected noise gain: a higher closed-loop gain produces a narrower usable bandwidth. According to the Analog Devices AD741 datasheet and the published comparison specifications, the AD741JN operates in the general-purpose, low-to-moderate-frequency amplifier class.
Is the AD741JN pin-compatible with a UA741AN?
The UA741AN is a candidate PDIP-8 replacement for AD741JN because published cross-reference data identifies both devices with a 1 MHz bandwidth and 5,000 uV maximum offset voltage. Treat the substitution as electrically acceptable only after checking supply voltage, common-mode range, output swing, bias current, drift, and noise against the requirements of the original circuit.
AD741JN versus UA741AN: which is better for a legacy design?
The AD741JN is preferable when a design requires the specifically selected AD741J grade, while the UA741AN is a reasonable candidate when its electrical limits satisfy the circuit and a replacement is needed. Cross-reference specifications identify both as 1 MHz, 5,000 uV maximum-offset, 8-pin PDIP devices, but gain bandwidth alone does not establish complete equivalence. Verify noise, bias current, drift, and common-mode limits.
What can replace an AD741JN on the same PCB?
A same-PCB replacement must use the same 8-pin PDIP pin arrangement and satisfy the original circuit’s electrical limits. Identified candidates include the UA741AN, UA748MJG, TL061BCN, and selected AD741-family variants, but each requires a final operating-point check. Offset null and no-connect pin behavior, supply range, common-mode range, and output swing should all be compared before soldering.
When should I choose AD741JN over an alternative amplifier?
Choose the AD741JN when the board specifically calls for the selected AD741J grade, an 8-pin PDIP footprint, approximately 1 MHz bandwidth, and up to 5,000 uV offset. It is particularly suitable for conventional analog designs that value short-circuit protection, internal compensation, and a straightforward through-hole package. Choose another candidate only after confirming its electrical limits match the actual signal and load.
Is AD741JN suitable for audio preamplifier designs?
The AD741JN can be used in low-frequency audio preamplifier and active-filter circuits because it provides a 1 MHz gain-bandwidth product, internal compensation, and full short-circuit protection. Its maximum input offset voltage of 5,000 uV may influence DC output accuracy in high-gain stages. Add offset nulling or choose a lower-offset grade when near-zero signal accuracy is critical.
Where can I buy AD741JN and check its price?
Use the Request a Quote form on this page to request current AD741JN pricing, stock, minimum order quantity, and lead time. Quote requests allow the exact package and manufacturer part number to be checked before an order is placed. The structured price area updates from current channel records, while the form provides the fastest route for a transaction-specific quotation.
How much does AD741JN cost?
Current AD741JN pricing depends on quantity, package form, and market availability, so it is best requested through the Request a Quote form on this page. Submit the target quantity and required delivery date to receive an offer for the exact AD741JN part number. This avoids relying on an outdated historical price for a through-hole operational amplifier.
What is the lead time for AD741JN?
AD741JN lead time depends on current manufacturer and channel inventory, so request the latest allocation through the Request a Quote form on this page. Include the required quantity, shipment destination, and target date. Because the AD741 is an established operational-amplifier family, an exact schedule should be confirmed against the current AD741JN supply position.
Is AD741JN currently in stock?
Use the Request a Quote form on this page for the current AD741JN stock position. Inventory can vary by package form and order quantity, and a listing from one channel does not establish availability for every order size. The quotation process checks the exact manufacturer part number and confirms the quantity that can be allocated.
What is the best cross-brand AD741JN equivalent?
The UA741AN is the strongest identified cross-brand candidate in the available comparison because it matches the AD741JN’s 8-pin PDIP arrangement, 1 MHz bandwidth, and 5,000 uV maximum offset voltage. It is not automatically a universal equivalent: check bias current, common-mode voltage, output swing, noise, drift, and supply requirements before replacing the AD741JN.
How should I power and decouple an AD741JN circuit?
Power the AD741JN only within the supply-voltage limits stated in the Analog Devices AD741 datasheet. Place the required bypass capacitors close to the positive and negative supply pins, keep the ground return short, and avoid long loops between the bypass network and the device. Verify the output-swing margin at the intended load because a 1 MHz gain-bandwidth product does not guarantee linear operation over every output range.

Data referensi engineering untuk AD741JN — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the AD741JN when a design specifically requires the selected AD741J grade, an 8-pin PDIP footprint, internal compensation, full short-circuit protection, approximately 1 MHz bandwidth, and an input-offset limit of up to 5,000 uV. The AD741KN or AD741HN can be preferable when a different AD741 accuracy grade provides better offset or drift performance, provided its limits meet the calibration requirement. Consider the UA741AN when its published 1 MHz bandwidth and 5,000 uV offset match the circuit and its remaining electrical characteristics are acceptable. Evaluate the UA748MJG or TL061BCN only after checking bias current, noise, drift, common-mode range, and output swing. In every case, verify supply limits and temperature requirements; sharing the PDIP-8 outline does not guarantee identical behavior across all operating conditions.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini AD741KN UA741AN UA748MJG TL061BCN AD741HN
Brand Analog Devices Analog Devices Texas Instruments Texas Instruments Texas Instruments Analog Devices
Package 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP
Gain-Bandwidth Product 1 MHz 1 MHz 1 MHz Approximately 1 MHz Approximately 1 MHz 1 MHz

Diferensiator Kunci

  • Selected AD741J accuracy grade (vsAD741KN)
  • Published bandwidth and offset match (vsUA741AN)
  • Manufacturer-specific selected accuracy family (vsTL061BCN)

Catatan Desain

Place the required input, output, and supply-bypass components close to the AD741JN pins, especially the positive and negative supply connections. Keep the analog-signal return path short and avoid routing high-current return paths beneath the amplifier. Use a solid ground reference and keep prototype wiring short because an 8-pin PDIP package with long socket or breadboard connections can add parasitic capacitance that affects high-gain behavior.

Do not assume that every 741-family amplifier is an automatic substitute for AD741JN. Confirm the pin arrangement, positive and negative supply limits, input common-mode range, output swing, input bias current, offset voltage, drift, noise, and operating-temperature grade. The identified UA741AN candidate matches the published 1 MHz bandwidth and 5,000 uV maximum offset, but those two parameters do not establish equivalence across every operating condition.

For stable closed-loop operation, keep feedback components compact and connect them directly to the appropriate input and output pins. Use resistor values that prevent excessive loading or parasitic oscillation, and avoid very high source impedances where input bias current can create unacceptable DC error. When AC performance matters, include the amplifier's 1 MHz gain-bandwidth limit and the closed-loop noise gain in the bandwidth calculation.

Design the supply rails around the Analog Devices AD741 datasheet limits and verify that the output can swing to the levels required by the next stage at the actual load. Full short-circuit protection does not remove the need for correct polarity, adequate supply bypassing, or load-current validation. Check the operating-temperature range and component tolerances across the complete industrial or automotive temperature span when those limits matter to the design.

Informasi Konformitas

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The AD741JN comparison information identifies the device as RoHS compliant. REACH, halogen-free, conflict-minerals, and lead-free status are not stated in the available manufacturer and comparison records.

Pencarian Terkait

AD741JN datasheet AD741JN datasheet pdf AD741JN pinout AD741JN specifications AD741JN equivalent AD741JN replacement AD741JN cross reference AD741JN vs UA741AN AD741JN 8-PDIP footprint AD741JN 1MHz op amp Analog Devices AD741JN AD741JN price AD741JN stock AD741JN audio preamplifier AD741JN sensor amplifier

Komponen dan Istilah Terkait

Analog Devices AD741JN AD741KN AD741HN UA741AN UA748MJG TL061BCN operational amplifier op amp general-purpose amplifier analog signal-chain IC semiconductor monolithic operational amplifier internal compensation short-circuit protection gain-bandwidth product input offset voltage 8-pin PDIP DIP package through-hole package active filter audio preamplifier sensor signal conditioning RoHS offset null
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ