AD741JN - 1MHz Single Op Amp in 8-PDIP | Analog Devices
部品番号: AD741JN ✓ 生産中AD741JN 概要
An operational amplifier, or op amp, is a high-gain analog building block used to amplify voltage differences, buffer inputs, integrate signals, and implement active filters. Within the broader semiconductor hierarchy, the AD741 belongs to the operational-amplifier category, which is part of analog signal-chain ICs and the wider semiconductor family. Unlike a passive resistor divider, an op amp uses active feedback to create stable gain and improve signal impedance behavior.
The AD741 series combines monolithic construction, internal compensation, and short-circuit protection. Its 1 MHz gain-bandwidth product permits useful closed-loop operation at moderate frequencies when compared with precision instrumentation amplifiers or much higher-speed operational amplifiers. The selected AD741J grade is intended to improve accuracy relative to the standard AD741C while retaining the familiar AD741 architecture and an 8-pin PDIP footprint.
Internal compensation removes the need for an external compensation network in ordinary closed-loop configurations, simplifying analog board design. Full short-circuit protection helps the output withstand overload conditions, although correct supply voltage, output loading, and thermal design remain essential. Offset null terminals permit practical input-offset adjustment where precision at zero or near-zero input is more important than the cost of additional external components.
Typical uses include low-frequency audio preamplification, instrumentation signal conditioning, active feedback and error-amplifier circuits, analog sensor interfaces, and educational or laboratory amplifier designs. The monolithic operational-amplifier architecture is especially useful when a system requires more accuracy and stability than a basic transistor stage but does not need the bandwidth or noise performance of a modern precision amplifier.
For a new board, verify the power-supply range, input common-mode range, output swing, offset limits, drift, noise, and operating-temperature limits against the Analog Devices AD741 datasheet before fixing the surrounding component values. The 8-pin PDIP is easy to prototype and socket, although a modern surface-mount operational amplifier may be preferable for space-constrained production designs.
This page combines the manufacturer-defined AD741 capabilities with a practical comparison against identified PDIP-8 alternatives. It highlights package reuse, bandwidth, offset-voltage differences, and design trade-offs so engineers can distinguish a genuine drop-in substitution from a merely similar amplifier before modifying a circuit board.
ドロップイン代替品: AD741JN — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
AD741KN
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
UA741AN
✅ ドロップイン📋 参考代替品(カタログ未掲載)
UA748MJG
✅ ドロップイン📋 参考代替品(カタログ未掲載)
TL061BCN
✅ ドロップイン📋 参考代替品(カタログ未掲載)
AD741HN
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
AD741JN 最大定格&電気的特性
| Amplifier Type | General-purpose operational amplifier |
| Number of Amplifier Circuits | 1 circuit |
| Gain-Bandwidth Product | 1 MHz |
| Maximum Input Offset Voltage | 5,000 uV |
| Compensation | Internal |
| Short-Circuit Protection | Full |
| Construction | Monolithic |
| Package Type | 8-pin PDIP |
| 実装タイプ | Through-hole |
| RoHS ステータス | Compliant |
AD741JN ピン構成
| ピン 1 | OFFSET NULL — Offset-voltage adjustment terminal |
| ピン 2 | INVERTING INPUT — Inverting input terminal |
| ピン 3 | NONINVERTING INPUT — Non-inverting input terminal |
| ピン 4 | V- — Negative supply voltage terminal |
| ピン 5 | OFFSET NULL — Offset-voltage adjustment terminal |
| ピン 6 | OUTPUT — Amplifier output terminal |
| ピン 7 | V+ — Positive supply voltage terminal |
| ピン 8 | NC — Not connected |
主な用途
AD741JN の用途: 6 件s: Low-Frequency Audio Preamplifier, Sensor Signal Conditioning, Active Audio Filter, Industrial Control Feedback Amplifier, Precision Measurement Buffer, Educational and Laboratory Amplifier.
Low-Frequency Audio Preamplifier
The AD741JN fits low-frequency audio preamplifier stages where a 1 MHz gain-bandwidth product, internal compensation, and full short-circuit protection provide a practical combination of function and simplicity. Connect pin 3 to the signal source, use pin 2 for inverting feedback, and take the amplified output from pin 6. Because the AD741JN can have up to 5,000 uV of input offset, use the offset-null pins when DC output accuracy matters. This is particularly useful for line-level preamplification, small audio-mixer stages, and educational signal-chain designs.
おすすめ
Sensor Signal Conditioning
The AD741JN can condition low-bandwidth sensor signals when the design needs a straightforward 8-pin PDIP amplifier rather than a complex precision signal chain. Its 1 MHz gain-bandwidth product supports moderate closed-loop gains, while the monolithic construction and internal compensation simplify feedback implementation. Place the sensor near the non-inverting input, return the reference input to the signal ground through the intended bias network, and bypass the supply pins close to the IC. The 5,000 uV maximum offset should be included in the error budget for high-gain measurements.
おすすめ
Active Audio Filter
The AD741JN is appropriate for first-order or modest higher-order active-filter prototypes operating well below its 1 MHz gain-bandwidth product. Internal compensation eliminates an external compensation network in conventional closed-loop configurations, while full short-circuit protection adds robustness around audio and control paths. Build the filter around the inverting and non-inverting inputs at pins 2 and 3, and route the filtered signal from pin 6. Validate resistor accuracy, output loading, and stable operating gain because practical filter performance also depends on passive-component tolerances.
おすすめ
Industrial Control Feedback Amplifier
The AD741JN can serve as an error or feedback amplifier in a low-bandwidth industrial control system when its supply, common-mode, and output-swing limits satisfy the operating range. The 1 MHz gain-bandwidth product is suitable for many slow feedback loops, and full short-circuit protection helps the output survive transient overloads. Keep the compensation and feedback components close to the relevant pins, provide local supply bypassing, and route high-current output loads separately from sensitive analog returns. Validate stability across temperature and supply tolerance before deploying it as a system feedback element.
おすすめ
Precision Measurement Buffer
The AD741JN can buffer a low-frequency measurement node when the circuit does not require the very low offset and drift of a dedicated instrumentation amplifier. Its monolithic construction, internal compensation, and 1 MHz gain-bandwidth product support unity-gain buffering and moderate closed-loop gain. Use the pin 3 input as the high-impedance signal entry, pin 2 for feedback, and pin 6 to drive the next stage. Account for the maximum 5,000 uV input offset in precision calculations and confirm the source impedance remains within the amplifier's bias-current and common-mode constraints.
おすすめ
Educational and Laboratory Amplifier
The AD741JN is well suited to educational, prototyping, and general laboratory amplifier circuits because its 8-pin PDIP package is easy to install and socket. Students can use the standard inverting and non-inverting arrangements while exploring gain, bandwidth, offset adjustment, and feedback. The 1 MHz gain-bandwidth product provides a useful upper limit when calculating closed-loop response, and the selected AD741J grade helps distinguish it from the standard AD741C. Include output-load, supply-rail, and common-mode checks to prevent incorrect laboratory hookups from damaging the amplifier.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: AD741JN — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | AD741KN | UA741AN | UA748MJG | TL061BCN | AD741HN |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Texas Instruments | Texas Instruments | Texas Instruments | Analog Devices |
| Package | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP |
| Gain-Bandwidth Product | 1 MHz | 1 MHz | 1 MHz | Approximately 1 MHz | Approximately 1 MHz | 1 MHz |
主な差別化要因
- Selected AD741J accuracy grade (vs AD741KN)
- Published bandwidth and offset match (vs UA741AN)
- Manufacturer-specific selected accuracy family (vs TL061BCN)
設計ノート
Place the required input, output, and supply-bypass components close to the AD741JN pins, especially the positive and negative supply connections. Keep the analog-signal return path short and avoid routing high-current return paths beneath the amplifier. Use a solid ground reference and keep prototype wiring short because an 8-pin PDIP package with long socket or breadboard connections can add parasitic capacitance that affects high-gain behavior.
Do not assume that every 741-family amplifier is an automatic substitute for AD741JN. Confirm the pin arrangement, positive and negative supply limits, input common-mode range, output swing, input bias current, offset voltage, drift, noise, and operating-temperature grade. The identified UA741AN candidate matches the published 1 MHz bandwidth and 5,000 uV maximum offset, but those two parameters do not establish equivalence across every operating condition.
For stable closed-loop operation, keep feedback components compact and connect them directly to the appropriate input and output pins. Use resistor values that prevent excessive loading or parasitic oscillation, and avoid very high source impedances where input bias current can create unacceptable DC error. When AC performance matters, include the amplifier's 1 MHz gain-bandwidth limit and the closed-loop noise gain in the bandwidth calculation.
Design the supply rails around the Analog Devices AD741 datasheet limits and verify that the output can swing to the levels required by the next stage at the actual load. Full short-circuit protection does not remove the need for correct polarity, adequate supply bypassing, or load-current validation. Check the operating-temperature range and component tolerances across the complete industrial or automotive temperature span when those limits matter to the design.
コンプライアンス情報
The AD741JN comparison information identifies the device as RoHS compliant. REACH, halogen-free, conflict-minerals, and lead-free status are not stated in the available manufacturer and comparison records.