Analog Devices

AD977BRRL - 16-Bit 100 kSPS SAR ADC | Analog Devices

MPN: AD977BRRL ✗ Akhir Hidup
5 V single supply Vdss 20-lead SOIC Package
MOQ: 1 |

AD977BRRL Ringkasan

The Analog Devices AD977BRRL is a 16-bit, single-input, successive-approximation analog-to-digital converter with a 100 kSPS sampling rate, a serial SPI interface, and a 20-lead SOIC package. It operates from a single 5 V supply and is specified for maximum power dissipation of 100 mW. The converter is designed for measurement and control systems that require moderate throughput, 16-bit resolution, and low power consumption without a parallel digital interface.

An ADC converts an analog voltage into a digital number for processing by a microcontroller, DSP, FPGA, or other digital controller. The AD977 belongs to the successive-approximation ADC category within the broader ADC and data-converter semiconductor hierarchy. Its internal switched-capillator architecture performs one conversion through a sequence of binary-weighted comparisons, allowing the 16-bit result to be transferred through a serial interface.

Key features include 100 kSPS throughput, 16-bit resolution, single 5 V operation, a serial SPI data interface, factory calibration, and a power-down mode. The manufacturer also tests the devices for signal-to-noise ratio and total harmonic distortion in addition to conventional offset, gain, and linearity specifications. These characteristics make the converter suitable for industrial instrumentation, sensor interfaces, process monitoring, and embedded measurement systems.

The switched-capitor SAR architecture provides deterministic sampling and conversion behavior while limiting power dissipation to 100 mW maximum. Because the converter is not a high-frequency pipeline ADC, it is better suited to continuous precision measurements than to waveform capture at megahertz rates. The SPI interface reduces the number of required signal connections and supports compact PCB layouts where pin count and routing simplicity are important.

Typical uses include digital pressure and temperature instrumentation, laboratory data acquisition, industrial process control, factory monitoring, and low-rate sensor signal capture. In these applications, the 100 kSPS rate is sufficient for many control and monitoring loops, while 16-bit resolution preserves fine amplitude distinctions after conversion. The single 5 V supply also simplifies analog and digital power architecture when the surrounding system already operates at 5 V.

When laying out the circuit, treat the analog input, reference, and ground connections as sensitive signal paths even though the sampling rate is relatively low. Place input and reference decoupling capacitors near their associated pins, keep digital clock and serial-data traces away from the analog input, and use a stable reference source. Follow the manufacturer datasheet pin-description table when assigning PCB tracks and verify the complete power-up sequence in the final system.

This product page consolidates the manufacturer specifications, package details, interface characteristics, selection guidance, and pin-compatible comparison information into one engineering-focused reference. It also distinguishes the AD977BRRL from related family members whose speed, package, or ordering options differ, helping designers verify replacement suitability before committing a PCB layout to production.

Alternatif penggantian untuk AD977BRRL — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

AD977ARRL

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 20-lead SOIC
Same 16-bit SAR conversion and 20-lead SOIC footprint; family-specific speed and temperature details must be verified before substitution.

📋 Alternatif referensi (tidak dalam katalog)

AD977ABRL

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 20-lead SOIC
Same 16-bit SAR resolution, 5 V supply class, and 20-lead SOIC footprint; AD977A-family conversion timing differs from the 100 kSPS AD977.

📋 Alternatif referensi (tidak dalam katalog)

AD977BRZRL

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 20-lead SOIC
Same AD977-family 16-bit, 100 kSPS, 5 V, SPI configuration in the 20-lead SOIC family; temperature and ordering-code differences require verification.

📋 Alternatif referensi (tidak dalam katalog)

AD977BRRL Rating Maksimal & Karakteristik Listrik

Resolusi 16 bit
Laju Pengambilan Sampel 100 kSPS
Input Count 1 input
Architecture Successive-approximation, switched-capillator
Tegangan Pemuat 5 V single supply
Maximum Power Dissipation 100 mW
Digital Interface Serial SPI
Paket 20-lead SOIC
Package Width 7.50 mm
Package Body Width 0.295 inch
Tipe Mounting Surface mount
Terminal Count 20 terminals
Package Shape Rectangular
Lead Form Gull wing
Temperature Grade Industrial
Power-Down Mode Supported
Factory Calibration Supported
DC and AC Testing Offset, gain, linearity, SNR, and THD
Packaging Tape and reel

AD977BRRL rectangular Diamant Konfigurasi Panduan

Konfigurasi pin untuk AD977BRRL (rectangular pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai rectangular untuk AD977BRRL

Tidak ada data diatribut pin yang tersedia untuk AD977BRRL.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

AD977BRRL cocok untuk 6 aplikasis: Industrial Sensor Acquisition, Process Control Instrumentation, Laboratory Data Acquisition, Digital Pressure Measurement, Power-Supply Monitoring, Embedded Test and Measurement.

🏭

Industrial Sensor Acquisition

The AD977BRRL fits industrial sensor acquisition when the measured signal requires 16-bit resolution but only a 100 kSPS sampling rate. Its single 5 V supply and maximum 100 mW power dissipation simplify embedded measurement electronics. Place the converter behind an anti-alias filter and low-noise input buffer, and use its SPI interface to transfer each conversion to a controller. The 100 kSPS throughput supports fast monitoring loops without the power and complexity of a high-speed pipeline ADC.

🏭

Process Control Instrumentation

The AD977BRRL is suitable for process-control measurements where a controller must digitize a single analog variable with 16-bit precision. At 100 kSPS, it can update a supervisory or proportional control loop faster than many slow sensor systems require. Its single 5 V operation permits direct participation in a 5 V analog rail, while the serial SPI interface reduces wiring to the controller. Input settling, reference stability, and grounding remain critical to repeatable process readings.

🔧

Laboratory Data Acquisition

The AD977BRRL can serve as the measurement ADC in a compact laboratory data-acquisition front end that emphasizes resolution and low power rather than waveform capture. The 100 kSPS rate is appropriate for temperature, pressure, strain-gauge, and slowly varying laboratory signals. Its 16-bit output provides fine numerical granularity, and the SPI interface allows a microcontroller to capture, timestamp, and process measurements. A low-noise reference and carefully isolated analog layout are essential for laboratory accuracy.

📱

Digital Pressure Measurement

The AD977BRRL fits digital pressure transmitters and pressure-controller modules where the transducer output is slow enough for a 100 kSPS SAR conversion. The converter’s 16-bit resolution can represent small pressure-related voltage changes without requiring a parallel ADC. Use an instrumentation front end to condition the bridge or sensor output, then connect the AD977BRRL to a controller through SPI. Stable reference voltage and short analog traces help prevent gain drift from being interpreted as pressure variation.

⚡

Power-Supply Monitoring

The AD977BRRL can monitor a scaled voltage in a power-supply or battery-management subsystem when feedback precision matters more than waveform bandwidth. A 100 kSPS sampling rate supports supervisory measurements of an output rail, while 16-bit resolution captures small deviations after suitable attenuation. The converter operates from a single 5 V supply and has a maximum power dissipation of 100 mW. Its serial interface makes it practical for central diagnostics with multiple measurements handled through multiplexing.

🖥️

Embedded Test and Measurement

The AD977BRRL is appropriate for embedded test equipment that measures one analog channel with high numerical resolution and modest acquisition bandwidth. Examples include production-line testers, board monitors, and portable diagnostic instruments. Its 100 kSPS rate allows repeated single-shot or small-block acquisitions, while SPI supports connection to a microcontroller without a wide parallel bus. Component selection should account for the obsolete lifecycle status, so new production designs should verify long-term supply before committing the layout.

Ringkasan Produk Direkomendasikan

AD977ARRL Related AD977-family SAR converter Digunakan di dalam: Industrial Sensor Acquisition, Process Control Instrumentation, Digital Pressure Measurement, Power-Supply Monitoring AD977BRZRL Related AD977-family SAR converter Digunakan di dalam: Industrial Sensor Acquisition, Laboratory Data Acquisition, Digital Pressure Measurement, Embedded Test and Measurement AD977ABRL Related single-channel AD977-family converter Digunakan di dalam: Process Control Instrumentation, Laboratory Data Acquisition, Power-Supply Monitoring, Embedded Test and Measurement
What is the AD977BRRL?
The AD977BRRL is a 16-bit, single-input, successive-approximation ADC from Analog Devices with a 100 kSPS conversion rate. It uses a serial SPI interface, operates from a single 5 V supply, and is packaged in a 20-lead SOIC. According to the Analog Devices AD977 product page and manufacturer datasheet, its switched-capillator architecture supports low-power data acquisition while preserving 16-bit resolution.
What is the sampling rate of AD977BRRL?
The AD977BRRL samples at 100 kSPS, meaning it can complete approximately 100,000 conversions per second. The manufacturer identifies the AD977 as the 100 kSPS member of the AD977 and AD977A family; the AD977A reaches 200 kSPS. According to the Analog Devices product page, the AD977BRRL therefore provides twice the conversion rate of a 50 kSPS design but half that of the AD977A family.
What is the AD977BRRL pinout?
The AD977BRRL uses a 20-lead SOIC with gull-wing leads, but individual pin numbers and signal names are not reproduced on this page. Use the pin-description table and package drawing in the Analog Devices AD977 manufacturer datasheet when assigning PCB tracks. The confirmed package information is 20 leads, a 7.50 mm body width, surface-mount construction, and tape-and-reel packaging.
Where can I download the AD977BRRL datasheet PDF?
The official AD977BRRL documentation is available through the Analog Devices AD977 product page at https://www.analog.com/en/products/ad977.html. That manufacturer page provides the product overview, datasheet access, and ordering information. The manufacturer datasheet should be used for the authoritative 20-lead pin descriptions, absolute maximum ratings, recommended operating conditions, timing characteristics, and analog performance curves.
How much power does the AD977BRRL consume?
The AD977BRRL dissipates no more than 100 mW when operating from its single 5 V supply. The Analog Devices manufacturer datasheet identifies this as the maximum power dissipation for the converter. Actual board-level consumption can vary with supply voltage, sampling activity, digital-interface transitions, and the selected power-down state, so thermal design should use the maximum specification as the conservative design limit.
What interface does the AD977BRRL use?
The AD977BRRL uses a serial SPI interface rather than a parallel data bus. This interface supports a compact connection to a microcontroller, DSP, or FPGA and reduces the number of data pins required on a circuit board. According to the Analog Devices product documentation, the converter also includes a power-down mode, which can be useful when the acquisition system is not continuously converting.
AD977BRRL vs AD977ABRZ: which should I choose?
Choose the AD977BRRL for a 100 kSPS, 16-bit design, while the AD977ABRZ belongs to the faster AD977A family rated at 200 kSPS. The comparison data also identifies differences in package and series characteristics. Because the AD977A throughput is 100% higher than that of the AD977, verify both the pinout and system timing before treating either part as a direct substitute.
When should I choose AD977BRRL over a higher-speed ADC?
Choose the AD977BRRL when 100 kSPS is sufficient and a 16-bit SAR architecture offers a better fit for precision measurement. Its single 5 V supply, serial SPI interface, and 100 mW maximum dissipation simplify embedded acquisition systems. Select a higher-speed ADC instead when the signal requires faster sampling, wider analog bandwidth, simultaneous conversion, or a differential input architecture.
Is AD977BRRL suitable for industrial sensor measurement?
The AD977BRRL is suitable for many industrial sensor-measurement applications that need 16-bit resolution at a 100 kSPS sampling rate. Its industrial temperature grade, single 5 V operation, and maximum power dissipation of 100 mW support compact embedded instrumentation. For high-impedance sensors, use the recommended source-impedance and settling information in the manufacturer datasheet, and include anti-alias filtering ahead of the analog input.
What can replace the AD977BRRL?
A valid replacement must use the same 20-lead SOIC footprint and preserve the ADC’s 16-bit resolution, 5 V supply, 100 kSPS timing, and SPI pin functions. Related AD977-family ordering variants are the closest candidates, but speed and temperature options can differ. Use the AD977 manufacturer datasheet and a board-level comparison to confirm every pin before approving a replacement.
What is the best drop-in replacement for AD977BRRL?
The closest drop-in candidates are related AD977 single-channel, 16-bit SAR converters that use the 20-lead SOIC and retain the 5 V supply, 100 kSPS rate, and SPI interface. Matching the family suffix alone is insufficient because package construction and temperature grade can vary. Confirm pin names, conversion timing, reference voltage, analog input range, and power-down behavior against the manufacturer datasheet before substitution.
Is the AD977BRRL a complete data-acquisition system?
No. The AD977BRRL is the analog-to-digital conversion element, not a complete data-acquisition system. A practical system also requires an input-conditioning network, voltage reference, clock source, digital controller, and suitable memory or communications interface. The converter’s single-channel SAR architecture and serial output make it particularly suitable for centralized acquisition of one analog variable.
What are the key specifications of AD977BRRL that engineers should know?
The AD977BRRL is a 16-bit, one-input SAR ADC with 100 kSPS throughput, a serial SPI interface, single 5 V operation, and a maximum power dissipation of 100 mW. It is offered in a 20-lead SOIC with gull-wing leads and industrial temperature grade. The Analog Devices manufacturer datasheet also identifies factory calibration and factory testing for SNR, THD, offset, gain, and linearity.
Where can I buy AD977BRRL and request a quote?
Use the Request a Quote form on this page to ask about AD977BRRL availability, MOQ, packaging, lead time, and a direct quotation. Because the AD977BRRL is an obsolete family member, current supply may be limited or unavailable. Provide the required quantity, reel or cut-tape preference, target delivery region, and any required traceability details with the request.
How long is the lead time for AD977BRRL?
Current lead time for the obsolete AD977BRRL should be confirmed through the Request a Quote form on this page rather than inferred from an old catalog record. Supply of an obsolete converter can depend on remaining factory inventory, lot traceability, packaging configuration, and regional logistics. State the required quantity and date when requesting the quotation so the supplier can confirm the actual schedule.
Is AD977BRRL currently in stock?
Current AD977BRRL stock status should be confirmed through the Request a Quote form on this page. The product is identified as obsolete, so distributor availability may change with residual inventory and does not represent a guaranteed ongoing production supply. For production continuity, ask for lot traceability, date-code information, and written confirmation of quantity before placing the order.
Which Analog Devices equivalent can replace AD977BRRL in a 5 V design?
The most credible equivalent is another member of the Analog Devices AD977 family that retains the 16-bit, one-channel SAR conversion, 100 kSPS rate, single 5 V supply, SPI interface, and 20-lead SOIC footprint. The AD977A family is not an automatic substitute because its 200 kSPS throughput changes timing and may involve package differences. Verify the exact ordering code against the AD977 manufacturer datasheet.

Data referensi engineering untuk AD977BRRL — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the AD977BRRL when an existing 20-lead SOIC design needs a 16-bit, single-channel SAR ADC at 100 kSPS from a 5 V supply. It is particularly useful for slow industrial sensors, laboratory instruments, power-supply monitoring, and embedded test systems where SPI reduces wiring and 100 mW maximum dissipation supports compact hardware. AD977BRZRL is the closest family-related candidate when the same basic electrical configuration and footprint are required, subject to confirmation of temperature grade and ordering details. AD977ABRL belongs to the 200 kSPS AD977A family and should be considered only when twice the conversion rate is useful and all timing and pin requirements match. AD977ARRL is another related family candidate, but its exact speed and temperature configuration must be checked. Because the AD977BRRL is obsolete, use it primarily for maintenance, repair, or previously approved production quantities unless lifecycle risk is formally accepted.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini AD977ARRL AD977ABRL AD977BRZRL
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 20-lead SOIC 20-lead SOIC 20-lead SOIC 20-lead SOIC
Resolution 16 bit 16 bit 16 bit 16 bit
Input Count 1 input 1 input 1 input 1 input
Supply Voltage 5 V single supply 5 V single supply 5 V single supply 5 V single supply
Digital Interface Serial SPI Serial SPI Serial SPI Serial SPI
Architecture Successive-approximation, switched-capillator Successive-approximation, switched-capulator Successive-approximation, switched-capulator Successive-approximation, switched-capulator

Diferensiator Kunci

  • Moderate sampling rate in a 16-bit SAR architecture (vsAD977ABRL)
  • Single-channel conversion with serial data transfer (vsAD977ARRL)
  • Low-power operation from a single rail (vsAD977BRZRL)

Catatan Desain

Route the analog input and reference connections away from SPI clock and data traces. Place the input and reference capacitors at the corresponding IC pins, use a compact analog path, and provide a quiet ground-return plane. Crosstalk and reference disturbance can appear directly in the 16-bit result even though the converter operates at only 100 kSPS.

Use the manufacturer’s recommended analog and digital supply arrangements and decoupling values. The AD977BRRL operates from a single 5 V supply, but reference and input circuitry may require additional filtering. Keep switching-regulator routing and magnetics away from the converter to prevent supply ripple from degrading SNR and THD.

Do not substitute an AD977A-family part without checking conversion timing and pin assignments. The AD977A reaches 200 kSPS, twice the AD977 rate, and related ordering codes can use different package or temperature options. Confirm supply voltage, analog input range, reference requirement, SPI timing, power-down behavior, and all 20 physical pins in the manufacturer datasheet.

Treat the reference as an analog signal and keep its return path short and continuous. Reference drift multiplies directly into the converted result, while source impedance and capacitor selection affect settling before conversion. Validate the complete input network for the highest expected source impedance and verify the available acquisition time against the manufacturer’s acquisition specifications.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The industrial temperature grade is confirmed, but specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated. AEC-Q100 is not applicable to this industrial ADC unless a separate automotive qualification is established.

Data disahkan pada: 2026-11-15 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

AD977BRRL datasheet AD977BRRL pinout AD977BRRL datasheet pdf AD977BRRL specifications AD977BRRL 20-SOIC AD977BRRL equivalent AD977BRRL replacement AD977BRRL cross reference AD977BRRL vs AD977ABRL AD977BRRL price AD977BRRL stock Analog Devices AD977BRRL AD977BRRL application circuit

Komponen dan Istilah Terkait

Analog Devices AD977BRRL AD977ARRL AD977ABRL AD977BRZRL AD977 AD977A analog-to-digital converter ADC successive-approximation ADC SAR architecture switched-capacitor ADC serial SPI interface single-channel ADC 16-bit resolution 100 kSPS throughput 200 kSPS throughput 5 V single supply power dissipation signal-to-noise ratio total harmonic distortion SOIC 20-lead SOIC surface-mount package industrial instrumentation sensor measurement
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ