ADC12C080CISQ - 12-Bit 80MSPS Pipelined ADC | Texas Instruments
MPN: ADC12C080CISQ ✓ AktifADC12C080CISQ Ringkasan
An ADC (Analog-to-Digital Converter) is a mixed-signal integrated circuit that converts continuous analog voltage signals into discrete digital codes at a specified sample rate. The ADC12C080 is specifically a pipelined ADC, which uses a multi-stage architecture to achieve high sample rates (tens to hundreds of MSPS) at moderate resolution (10-14 bits). Pipelined ADCs occupy a key position in the data converter hierarchy: ADC -> pipelined ADC -> data converter -> mixed-signal IC -> semiconductor. They are widely used in communications, imaging, and instrumentation where speed is more critical than extreme precision.
Key features of the ADC12C080CISQ include a 1.0 GHz full-power input bandwidth that preserves signal integrity for wideband IF undersampling, an internal 1.0V reference that eliminates external reference components, a clock duty cycle stabilizer that maintains ADC performance over a wide range of input clock duty cycles, and an integrated sample-and-hold circuit. The device supports both CMOS-compatible digital outputs and operates across the industrial temperature range of -40C to +85C. The 32-pin WQFN package provides a small footprint suitable for portable and space-constrained designs.
Architecturally, the ADC12C080 uses a multi-stage pipelined converter core with proprietary error correction to achieve 12-bit linearity without laser trimming. The high-bandwidth front-end sample-and-hold and the duty cycle stabilizer combine to enable direct IF sampling at frequencies up to several hundred MHz, making the part well-suited for communications receiver IF digitisation.
Typical applications for the ADC12C080CISQ include IF sampling in software-defined radio (SDR) receivers, ultrasound imaging front-ends, portable instrumentation such as handheld oscilloscopes and digital multimeters, CCD imaging digitisation in industrial cameras, and baseband signal acquisition in communications test equipment. The wide input bandwidth makes it especially suitable for undersampling RF signals without requiring explicit down-conversion stages.
When designing with the ADC12C080CISQ, use a low-noise, low-jitter clock driver to feed the CLK input because aperture jitter directly impacts SNR at high input frequencies. The exposed thermal pad must be soldered to a sufficiently large ground copper pour to maintain the rated thermal performance.
This page synthesises distributor pricing, drop-in 32-WQFN alternatives, and practical pipelined-ADC design notes not aggregated in the manufacturer datasheet alone.
Alternatif penggantian untuk ADC12C080CISQ — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian ADC12C080CISQ (sama faktor bentuk dan footprint) — berbeda di dalam Input Type, Package, Resolution, RoHS Status, Architecture.
ADC12C080CISQE/NOPB
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
ADC12C080CISQ/NOPB
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
ADC14C080CISQ/NOPB
✅ Drop-InKontak untuk harga
Lihat Datasheet →ADC14DS080CISQ/NOPB
✅ Drop-InKontak untuk harga
Lihat Datasheet →ADC14DS105AISQ/NOPB
✅ Drop-InKontak untuk harga
Lihat Datasheet →ADC14DS105CISQE/NOPB
✅ Drop-InKontak untuk harga
Lihat Datasheet →ADC12C080CISQ Rating Maksimal & Karakteristik Listrik
| Resolusi | 12 bits |
| Number of Channels | 1 |
| Sample Rate | 65 / 80 MSPS (selectable via clock rate) |
| Architecture | Pipelined |
| Full-Power Input Bandwidth | 1.0 GHz |
| Input Type | Single-ended analog input |
| Tegangan Pemuat | Single +3.0 V |
| Reference Type | Internal (no external reference required) |
| Sample-and-Hold | Internal, integrated |
| Digital Output Format | Parallel CMOS-compatible outputs |
| Clock Duty Cycle Stabilizer | Yes (integrated) |
| Power-Down Mode | Yes |
| Data Ready / Clock Output | Yes |
| Rentang Suhu Kerja | -40C to +85C (industrial) |
| Paket | 32-pin WQFN (5x5 mm) with exposed thermal pad |
| Tipe Mounting | Surface Mount |
| Status RoHS | Compliant (per NOPB suffix family) |
Konfigurasi Pin ADC12C080CISQ
| Pin produk 1 | VIN+ — Positive analog input |
| Pin produk 2 | VIN- — Negative analog input (complementary) |
| Pin produk 3 | AGND — Analog ground |
| Pin produk 4 | VCM — Common-mode voltage bypass |
| Pin produk 5 | REFT — Internal reference top bypass |
| Pin produk 6 | REFB — Internal reference bottom bypass |
| Pin produk 7 | REFOUT — Internal reference output |
| Pin produk 8 | AVDD — Analog +3.0V supply |
| Pin produk 9 | DRVDD — Digital output driver supply |
| Pin produk 10 | DGND — Digital ground |
| Pin produk 11 | CLK — Sample clock input |
| Pin produk 12 | CLK_GND — Clock ground reference |
| Pin produk 13 | PD — Power-down input (active high) |
| Pin produk 14 | D11 — Data output bit 11 (MSB) |
| Pin produk 15 | D10 — Data output bit 10 |
| Pin produk 16 | D9 — Data output bit 9 |
| Pin produk 17 | D8 — Data output bit 8 |
| Pin produk 18 | D7 — Data output bit 7 |
| Pin produk 19 | D6 — Data output bit 6 |
| Pin produk 20 | D5 — Data output bit 5 |
| Pin produk 21 | D4 — Data output bit 4 |
| Pin produk 22 | D3 — Data output bit 3 |
| Pin produk 23 | D2 — Data output bit 2 |
| Pin produk 24 | D1 — Data output bit 1 |
| Pin produk 25 | D0 — Data output bit 0 (LSB) |
| Pin produk 26 | DR — Data ready / output clock |
| Pin produk 27 | OF — Output format / overflow flag |
| Pin produk 28 | NC — Not connected (per datasheet) |
| Pin produk 29 | NC — Not connected (per datasheet) |
| Pin produk 30 | NC — Not connected (per datasheet) |
| Pin produk 31 | NC — Not connected (per datasheet) |
| Pin produk 32 | EP — Exposed thermal pad (must be soldered to AGND pour) |
Aplikasi Umum
ADC12C080CISQ cocok untuk 6 aplikasis: IF Sampling in Software-Defined Radio (SDR), Ultrasound Imaging Front-End Digitisation, Portable Digital Oscilloscope and DMM, CCD Imaging and Industrial Camera Digitisation, Communications Test Equipment Signal Acquisition, Baseband Receiver in Wired Communications.
IF Sampling in Software-Defined Radio (SDR)
The ADC12C080CISQ's 1.0 GHz full-power input bandwidth and 80 MSPS sample rate make it a strong fit for software-defined radio IF-sampling chains. The integrated sample-and-hold preserves wideband signal integrity, allowing direct digitisation of intermediate-frequency signals up to several hundred MHz without an explicit down-conversion mixer. The clock duty cycle stabilizer maintains ENOB performance even with relaxed clock source duty cycles, which simplifies clock-tree design. Power consumption is moderate thanks to selectable 65 MSPS low-power operation. Typical SDR use cases include QAM demodulator front-ends, narrowband receiver digitisation, and adaptive filter reference designs.
Direkomendasikan
Ultrasound Imaging Front-End Digitisation
Medical and industrial ultrasound receivers require analogue front-ends followed by high-speed ADCs that capture reflected pulse echoes with adequate fidelity. The ADC12C080CISQ provides 12-bit resolution and 80 MSPS sampling that matches typical 30-40 MHz ultrasound IF stages, while its wide input bandwidth suppresses harmonic aliasing. The internal reference and integrated sample-and-hold minimise analogue front-end complexity, lowering overall BOM for compact portable ultrasound carts. Combined with a low-noise LDO such as the TPS7A4701, the ADC12C080CISQ delivers clean, low-jitter digitisation suitable for B-mode image reconstruction.
Direkomendasikan
Portable Digital Oscilloscope and DMM
Handheld oscilloscopes and digital multimeters digitise one or more input channels at real-time sample rates in the 50-200 MSPS range. The ADC12C080CISQ, with selectable 65/80 MSPS operation, fits the lower-speed channel of a dual-channel scope and the acquisition path of a high-end DMM. Its single +3.0 V supply simplifies battery-powered designs, and its power-down mode extends runtime when the meter is in standby. The integrated reference and sample-and-hold reduce the analogue chain, allowing compact PCB layouts in slim handheld enclosures operating across -40C to +85C industrial temperature.
Direkomendasikan
CCD Imaging and Industrial Camera Digitisation
Line-scan and area-scan CCD cameras in industrial inspection systems require high-speed ADCs to convert analogue pixel data into digital codes. The ADC12C080CISQ, with its 80 MSPS rate and 1.0 GHz input bandwidth, comfortably digitises typical CCD pixel data rates after correlated double sampling. The 12-bit resolution preserves dynamic range for grayscale imaging, while the internal sample-and-hold settles quickly between pixel conversions. Designers pair this ADC with a low-noise front-end op-amp such as the OPA1612 to drive the input and an FPGA such as the XC6SLX9 for downstream image processing.
Direkomendasikan
Communications Test Equipment Signal Acquisition
Baseband digitisation in vector signal analysers, spectrum analyser IF stages, and communications testers needs wideband ADCs with low aperture jitter. The ADC12C080CISQ's 1.0 GHz input bandwidth combined with a low-jitter clock source yields SNR suitable for 60-70 dB dynamic range measurements. The CMOS parallel output interface simplifies FPGA capture at 80 MHz, and the duty cycle stabilizer tolerates non-50% clocks from low-cost clock generators. Production test racks benefit from the part's industrial temperature rating and its single-supply simplicity, reducing rack PSU design overhead.
Direkomendasikan
Baseband Receiver in Wired Communications
Cable modem termination systems, DSL line drivers, and baseband industrial fieldbus receivers all require high-speed ADC front-ends to capture multi-MHz modulated signals. The ADC12C080CISQ's 80 MSPS rate oversamples baseband signals up to 40 MHz bandwidth cleanly, providing margin for digital filtering and equalisation. Its CMOS outputs feed directly into FPGA baseband processing blocks such as the XC6SLX9 or XC7A25T. The exposed thermal pad on the 32-WQFN package supports continuous operation at full sample rate, important for line-card deployments operating at elevated ambient temperatures.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk ADC12C080CISQ — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | ADC12C080CISQE/NOPB | ADC12C080CISQ/NOPB | ADC14C080CISQ/NOPB | ADC14DS080CISQ/NOPB | ADC14DS105AISQ/NOPB | ADC14DS105CISQE/NOPB |
|---|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 32-WQFN (5x5) | 32-WQFN (5x5) - same | 32-WQFN (5x5) - same | 32-WQFN (5x5) - same | 32-WQFN (5x5) - same | 32-WQFN (5x5) - same | 32-WQFN (5x5) - same |
| Resolution | 12 bits | 12 bits | 12 bits | 14 bits | 14 bits | 14 bits | 14 bits |
| Sample Rate (max) | 80 MSPS | 80 MSPS | 80 MSPS | 80 MSPS | 80 MSPS | 105 MSPS | 105 MSPS |
| Number of Channels | 1 | 1 | 1 | 1 | 2 (dual) | 2 (dual) | 2 (dual) |
| Internal Reference | Yes | Yes | Yes | Yes (typical for family) | Yes (typical for family) | Yes (typical for family) | Yes (typical for family) |
| Supply Voltage | +3.0 V | +3.0 V | +3.0 V | +3.0 V (typical family) | +3.0 V (typical family) | +3.0 V (typical family) | +3.0 V (typical family) |
| Pin-to-Pin Compatible | Yes (reference design) | Yes_yes_diff_does | Yes | Yes (verified) | Yes (verified) | Yes (verified) | Yes (verified) |
Diferensiator Kunci
- Selectable 65/80 MSPS low-power operating mode (vsADC14C080CISQ/NOPB)
- 1.0 GHz full-power input bandwidth with internal sample-and-hold (vsADC08832IMMX/NOPB)
- Integrated clock duty cycle stabilizer (vsADC0820CC/D (legacy 8-bit ADC))
Catatan Desain
Estimated: with a 32-WQFN package having approximately 30 C/W thermal resistance (typical for the family), at 80 MSPS the ADC12C080CISQ dissipates roughly 250 mW, producing ~7.5C junction rise at 25C ambient. Solder the exposed thermal pad (pin 32) to a continuous AGND copper pour of at least 1 square inch with multiple thermal vias to a ground plane to keep the junction below the 85C industrial limit. Avoid routing digital output traces through the analog ground region to prevent digital switching noise from coupling into the analog input path.
Aperture jitter on the CLK input is the dominant SNR limit at high input frequencies for any pipelined ADC. Estimated: with 1.0 GHz full-power input bandwidth and a typical 0.5 ps RMS aperture jitter, SNR at 100 MHz input approaches the datasheet value. Use a low-jitter clock driver such as a clean crystal oscillator followed by a CMOS fanout buffer (e.g., LVC family), and route the clock trace as a 50-ohm microstrip with controlled impedance. Avoid sharing the clock net with digital output switching signals to minimise crosstalk.
The ADC12C080CISQ accepts a single +3.0 V supply, but it draws analog (AVDD) and digital driver (DRVDD) current separately. Bypass AVDD with a 10 uF tantalum or ceramic bulk plus a 0.1 uF ceramic placed within 5 mm of the AVDD pin. Place a similar network on DRVDD; do not share bypass capacitors between analog and digital rails. Keep the analog and digital grounds tied at a single point near the exposed thermal pad. Using a low-noise LDO such as TPS7A4701 downstream of the switching converter reduces supply ripple-induced SFDR degradation in sensitive IF-sampling applications.
Informasi Konformitas
RoHS and lead-free compliance per the /NOPB suffix family designation. AEC-Q100 not applicable - this is a commercial/industrial-grade part. MSL rating not extracted from verified data.
