Analog Devices

ADM213EARZ - 4/5 5V RS-232 Transceiver | Analog Devices

MPN: ADM213EARZ ✓ Aktif
4.5 V to 5.5 V Vdss 28-pin SOIC Package
MOQ: 1 |

ADM213EARZ Ringkasan

Analog Devices ADM213EARZ is a 4-driver, 5-receiver RS-232 and V.28 line transceiver operating from a single 5 V supply in a 28-pin SOIC package. The ADM213E family supports data rates up to 230 kbps, provides shutdown and enable controls on selected products, and is designed for communication interfaces exposed to severe electrical environments.

An RS-232 transceiver is an interface IC that combines line drivers and line receivers on one chip. EIA-232 and V.28 signaling converts between low-voltage logic levels and the bipolar voltage levels used by RS-232 equipment. In the signal-chain hierarchy, this device belongs to the RS-232 interface IC family, performs logic-level conversion, and serves as the physical communication layer between digital equipment and a serial port.

The ADM213E family includes four RS-232 drivers and five receivers, with two receivers remaining active during shutdown. Its enhanced electrical protection includes ±15 kV ESD protection, while the single 5 V operating supply simplifies system implementation. The ADM213E product family is also identified as compliant with applicable EIA-232E, CCITT V.28, and EU EMC requirements.

The ADM213EARZ combines four transmit channels with five receive channels for multi-port RS-232 equipment. Its 230 kbps maximum data rate supports legacy serial communications, industrial control links, data-acquisition systems, and service interfaces. Shutdown capability can reduce power use when communication is inactive, while selected receiver channels remain operational for monitoring or wake functions.

Typical uses include industrial serial-port expansion, instrumentation control, data-logger interfaces, board-to-board communication links, and equipment requiring multiple RS-232 channels. The 28-pin SOIC package allows a compact implementation, although careful treatment of driver outputs, receiver inputs, supply bypassing, and external protection is required in electrically harsh installations.

Place the supply bypass capacitor close to the device and route each RS-232 driver output away from sensitive receiver and logic traces. Confirm that every connected cable meets the EIA-232E and V.28 limits, and use suitable protection when cables leave the equipment enclosure. Review shutdown-state receiver behavior before assigning pins in a multi-drop or monitoring system.

This product record combines the manufacturer’s ADM213E technical description with application-oriented implementation guidance, practical interface considerations, and a structured comparison against pin-compatible RS-232 transceiver options. The Request a Quote form on this page supports purchasing, availability, and lead-time inquiries for the ADM213EARZ.

Alternatif penggantian untuk ADM213EARZ — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian ADM213EARZ (sama faktor bentuk dan footprint) — berbeda di dalam Product Type, Supply Voltage, Enable Control, Maximum Data Rate, Package.

Analog Devices
Product Type: RS-232 line driver/receiver transceiver
Supply Voltage: 5 V
Enable Control: Yes
Bandingkan dengan ADM213EARZ →
Analog Devices
Product Type: RS-232 transceiver
Supply Voltage: +5 V
Enable Control: Yes
Bandingkan dengan ADM213EARZ →

ADM213EAR

✅ Drop-In
Analog Devices
📦 28-pin SOIC
RS-232 transceiver · 4 drivers · 5 receivers · 2 receivers · +5 V · 230 kbps · RS-232 and V.28 · EIA-232E and CCITT V.28

Kontak untuk harga

Lihat Datasheet →

ADM213EARSZ

✅ Drop-In
📦 28-pin SOIC
Same ADM213E 4/5 RS-232 family and 28-pin SOIC package; exact suffix-specific control and ordering details require verification

📋 Alternatif referensi (tidak dalam katalog)

HIN213EIBZ

✅ Drop-In
📦 28-pin SOIC
Cross-brand 4/5 RS-232 option in the same 28-pin SOIC footprint; control polarity and parameter differences require comparison

📋 Alternatif referensi (tidak dalam katalog)

MAX213CDW

✅ Drop-In
📦 28-pin SOIC
Cross-brand 4/5 RS-232 transceiver in a 28-pin SOIC package; supply, control-state, and speed details require verification

📋 Alternatif referensi (tidak dalam katalog)

MAX213CDWR

✅ Drop-In
📦 28-pin SOIC
Cross-brand 4/5 RS-232 option sharing the 28-pin SOIC footprint; electrical and shutdown-state differences require verification

📋 Alternatif referensi (tidak dalam katalog)

ADM213EARZ Spesifikasi

Product Type RS-232/V.28 line transceiver
Tegangan Pemuat 4.5 V to 5.5 V
Nominal Supply Voltage +5 V
Maximum Data Rate 230 kbps
Driver Count 4
Receiver Count 5
Receivers Active During Shutdown 2
ESD Protection ±15 kV
Interface Standard EIA-232E and CCITT V.28
Shutdown Control Available
Enable Control Available on selected family products
Paket 28-pin SOIC
Package Width 7.50 mm
Tipe Mounting Surface mount

ADM213EARZ 7.50 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk ADM213EARZ (7.50 mm pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 7.50 mm untuk ADM213EARZ

Tidak ada data diatribut pin yang tersedia untuk ADM213EARZ.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

ADM213EARZ cocok untuk 6 aplikasis: Industrial Serial Port Expansion, Data Acquisition Instrumentation, Industrial Control Equipment, Data Logger Communications, Board-to-Board Communication, Network Equipment Service Ports.

🏭

Industrial Serial Port Expansion

The ADM213EARZ is suitable for industrial controllers that need more RS-232 ports than their main processor can provide directly. Four driver channels can support outbound command paths, while five receiver channels can accept acknowledgments, interlocks, and equipment-status signals. Its 4.5 V to 5.5 V single-supply operation simplifies integration with 5 V control electronics, and the 230 kbps rate accommodates conventional asynchronous industrial links. The 28-pin SOIC footprint also preserves space on densely populated control boards. Designers should verify shutdown polarity and the behavior of the two receivers that remain active before assigning monitoring functions.

🔧

Data Acquisition Instrumentation

The ADM213EARZ fits laboratory and process-instrumentation systems that exchange commands and measurements through legacy RS-232 equipment. Its four transmitters can connect separate instruments or control targets, while five receivers provide additional channels for status, alarms, and remote signaling. The 230 kbps maximum data rate is more than adequate for legacy measurement protocols, and the single 5 V supply reduces the need for bipolar interface rails. For bench systems, keep long cable outputs away from sensitive analog circuitry and follow the Analog Devices application guidance for supply bypassing and external protection.

🏭

Industrial Control Equipment

The ADM213EARZ can provide the multi-channel serial boundary between a controller and external actuators, programmers, or service equipment. Four driver outputs support command transmission, and five receiver inputs allow controller monitoring of completion signals and fault conditions. Operation from 4.5 V to 5.5 V aligns with common 5 V industrial logic, while ±15 kV ESD protection strengthens the interface against electrostatic discharge encountered during installation and servicing. Engineers should validate the complete EIA-232E and V.28 interface, especially grounding and cable protection, before deploying the device in an electrically noisy enclosure.

🖥️

Data Logger Communications

The ADM213EARZ is appropriate for data loggers that communicate with computers, sensors, or local service terminals over RS-232. Multiple driver and receiver channels allow simultaneous command output and status collection without using several separate transceiver packages. The device’s 230 kbps capability supports legacy serial logging protocols, and its single 5 V supply simplifies power architecture in compact logging equipment. Shutdown control can be useful during idle periods, while the two receivers that remain active can preserve selected monitoring or wake indications. Firmware developers should test all control states and cable transitions before deploying the interface in unattended installations.

🔧

Board-to-Board Communication

The ADM213EARZ can bridge two circuit boards that use a legacy RS-232 physical interface rather than a modern differential standard. Its four transmitters and five receivers support several point-to-point links within an enclosure, provided the standard RS-232 electrical and grounding requirements are satisfied. The 230 kbps data rate supports low- and moderate-speed command traffic, while ±15 kV ESD protection improves resilience in industrial or service-accessible systems. For internal board links, minimize trace lengths between transceivers, provide local supply decoupling, and verify that the system’s ground reference meets EIA-232E requirements.

🌐

Network Equipment Service Ports

The ADM213EARZ is useful in network and communications equipment that retains an RS-232 service, console, or equipment-maintenance port. Four driver channels can support console and auxiliary control links, while five receivers can receive status from connected field equipment. The single 5 V supply integrates cleanly with conventional communications hardware, and the 230 kbps rate exceeds the needs of most administrative and service protocols. Because service ports are often exposed during installation, keep ESD protection and external cable protection in the design, route driver traces away from clocked circuitry, and verify shutdown behavior for remote-management workflows.

What is the ADM213EARZ?
The ADM213EARZ is a 5 V RS-232 and V.28 transceiver from Analog Devices with four line drivers and five line receivers in a 28-pin SOIC package. It is intended for EIA-232E and CCITT V.28 serial interfaces. According to the Analog Devices ADM213E product information, the family supports data rates up to 230 kbps and includes ESD protection rated at ±15 kV, making it suitable for robust multi-channel serial equipment.
What is the operating voltage of ADM213EARZ?
The ADM213EARZ operates from a single 5 V supply, with a stated operating range of 4.5 V to 5.5 V. The Analog Devices ADM213E product information identifies the device as a CMOS RS-232 interface operating from one supply rail. This single-supply arrangement simplifies board design compared with traditional bipolar RS-232 implementations, while the broad logic-family range supports standard 5 V system rails.
How many RS-232 drivers and receivers does ADM213EARZ have?
The ADM213EARZ provides four RS-232 drivers and five RS-232 receivers. According to Analog Devices, two of the receiver channels remain active during shutdown, allowing selected signals to be monitored while the main interface is powered down. This channel count supports multi-port systems that need several outbound serial connections in combination with additional incoming status or control signals.
What is the maximum data rate of ADM213EARZ?
The ADM213EARZ supports data rates up to 230 kbps. Analog Devices states that the ADM213E family conforms to the EIA-232E and CCITT V.28 specifications and operates at rates up to 230 kbps. This rate is appropriate for established RS-232 equipment, industrial control interfaces, instrumentation links, and service ports that use conventional asynchronous serial communication.
Where can I download the ADM213EARZ datasheet PDF?
The official ADM213E datasheet is available through Analog Devices at the product page listed on this page. The manufacturer documentation defines the electrical characteristics, RS-232 interface behavior, shutdown and enable functions, pin information, and application details. Use the Analog Devices ADM213E page for the current manufacturer document, and use the package drawing and pin-description tables when assigning PCB nets.
Where can I find the ADM213EARZ pinout?
The ADM213EARZ pin assignment is documented in the Analog Devices ADM213E manufacturer datasheet. The component uses a 28-pin SOIC, and its external connections include RS-232 driver outputs, receiver inputs, supply and ground pins, and the applicable shutdown and enable controls. Use the pin-description and package diagrams in that document when creating the PCB footprint and verifying signal routing.
Is ADM213EARZ suitable for industrial RS-232 equipment?
The ADM213EARZ is suitable for industrial and instrumentation interfaces requiring robust single-supply RS-232 operation. Analog Devices identifies the ADM213E family as intended for harsh electrical environments, with ±15 kV ESD protection and compliance with EIA-232E, CCITT V.28, and applicable EU EMC requirements. Its four drivers and five receivers also make it useful for equipment that needs several serial channels.
Can ADM213EARZ replace ADM213EAR?
The ADM213EARZ can be used as a board-level replacement for ADM213EAR when the system accepts the ADM213EARZ ordering code and the exact manufacturer configuration is compatible. Both are listed as 28-pin SOIC 4/5 RS-232 transceivers. Before substitution, compare the manufacturer pin descriptions, shutdown behavior, enable polarity, and ordering information rather than relying on package shape alone.
What can replace ADM213EARZ in a 28-pin RS-232 design?
The closest documented drop-in choices include ADM213EAR, ADM213EARSZ, HIN213EIBZ, MAX213CDW, and MAX213CDWR, each listed in a compatible 28-pin SOIC form. The ADM213EARZ is the strongest choice when its shutdown and enable behavior exactly matches the circuit. For another manufacturer, verify pin-to-pin behavior, supply limits, driver and receiver counts, and protection requirements before production release.
ADM213EARZ vs MAX213CDW - which is better for an RS-232 interface?
The ADM213EARZ is preferable when its Analog Devices control-pin behavior and 230 kbps capability match an existing 28-pin SOIC design exactly. The MAX213CDW is a documented cross-brand option in a comparable 28-pin SOIC package, but its shutdown and enable functions must be checked against the original circuit. According to Analog Devices and distributor cross-reference information, both address four-driver, five-receiver RS-232 interfaces.
When should I choose ADM213EARZ over MAX213CDW?
Choose the ADM213EARZ when the original design was qualified around its exact 4.5 V to 5.5 V supply range, 230 kbps operation, four drivers, five receivers, and family-specific shutdown behavior. Select MAX213CDW when its documentation confirms equivalent pin behavior and better sourcing or lifecycle conditions. The decision should follow a full pin, voltage, speed, protection, and control-state comparison rather than package count alone.
Is ADM213EARZ the same as HIN213EIBZ?
The ADM213EARZ and HIN213EIBZ are not identical products, although cross-reference information identifies HIN213EIBZ as a similar 28-pin RS-232 transceiver option. The ADM213EARZ is manufactured by Analog Devices, while HIN213EIBZ is manufactured by Renesas Electronics. Confirm driver and receiver counts, control polarity, shutdown behavior, supply range, data rate, and ESD rating before treating the Renesas part as a direct replacement.
What are the key specifications of ADM213EARZ that engineers should know?
The key ADM213EARZ specifications are a 4.5 V to 5.5 V supply, four RS-232 drivers, five receivers, operation up to 230 kbps, and ±15 kV ESD protection in a 28-pin SOIC package. Analog Devices also identifies EIA-232E and CCITT V.28 conformance for the ADM213E family. Two receivers remain active during shutdown, and family members may provide shutdown and enable controls for power management.
Where can I buy ADM213EARZ and check its lead time?
Use the Request a Quote form on this page to request ADM213EARZ purchasing, current availability, and lead-time information. The form is the appropriate channel for a firm quotation because market conditions and allocation can change after product-page publication. Specify the required quantity, acceptable packaging form, and target delivery location when submitting the request.
What is the price of ADM213EARZ?
Current pricing for the ADM213EARZ is best obtained through the Request a Quote form on this page. The form accepts the required quantity and requested delivery terms, allowing the commercial team to return a current quotation. Avoid treating historical catalog figures as a binding price because component pricing and availability can change with market conditions and inventory levels.
Is ADM213EARZ in stock?
Stock status for the ADM213EARZ should be confirmed through the Request a Quote form on this page. Submit the required quantity and desired packaging information so the commercial team can check current allocation. Analog Devices identifies the ADM213 family as production, but production status alone does not guarantee that every quantity is immediately available for shipment.

Data referensi engineering untuk ADM213EARZ — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the ADM213EARZ when an existing design requires four RS-232 drivers, five receivers, a 4.5 V to 5.5 V supply, operation up to 230 kbps, and the established ADM213E shutdown behavior. Its ±15 kV ESD rating is particularly useful in industrial or service-accessible equipment. ADM213EAR is the logical same-manufacturer option when the exact ordering configuration and control behavior match the target board. HIN213EIBZ may be preferred when cross-brand sourcing is advantageous, but confirm pin behavior, supply range, protection, and shutdown states. MAX213CDW and MAX213CDWR are also 28-pin SOIC choices, yet they should be selected only after their manufacturer documentation confirms compatibility with the original enable and shutdown logic. For every alternative, validate the PCB footprint, electrical pin assignments, system grounding, and external protection rather than relying solely on the shared package count.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini ADM213EAR ADM213EARSZ HIN213EIBZ MAX213CDW MAX213CDWR
Brand Analog Devices Analog Devices Analog Devices Renesas Electronics Maxim Integrated Maxim Integrated
Package 28-pin SOIC 28-pin SOIC 28-pin SOIC 28-pin SOIC 28-pin SOIC 28-pin SOIC

Diferensiator Kunci

  • Five receivers extend beyond the four available drivers (vsMAX213CDW)
  • Higher documented family data rate (vsHIN213EIBZ)
  • Defined ESD protection for interface robustness (vsMAX213CDWR)
  • Two receivers remain active in shutdown (vsADM213EAR)

Catatan Desain

Place the supply bypass capacitor immediately beside the ADM213EARZ power and ground pins, and provide a short return path to the device. Keep RS-232 driver outputs physically separated from receiver inputs and low-level logic traces to reduce coupling. Match connector-side protection components close to the connector so surge or ESD current is diverted before reaching the transceiver pins.

Do not assign a shutdown-state function without checking the ADM213E control logic. Two receivers remain active during shutdown, but the usable channels, active-level polarity, and behavior of the drivers must be verified against the manufacturer pin and timing tables. A pinout copied from a different RS-232 transceiver can produce an apparently functional board with reversed control polarity or incompatible receiver activity.

RS-232 is a single-ended interface whose cable currents can couple into surrounding circuitry. Route driver and receiver nets away from clocks, precision analog signals, and switching-regator power loops. Maintain the required ground relationship between communicating equipment, and consider external protection for user-accessible cables where installation transients or ESD events are likely.

The ADM213EARZ supports operation up to 230 kbps, so conventional board-level interconnects are generally adequate. Nevertheless, use short driver traces, avoid unnecessary stubs, and observe the EIA-232E and CCITT V.28 system requirements. When substituting another transceiver, compare control-pin polarity and shutdown behavior in addition to package, voltage, speed, and channel count.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

Analog Devices identifies the ADM213E family as compliant with applicable EU EMC requirements. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals statuses are not stated in the cited product information.

Data disahkan pada: 2026-11-14 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

ADM213EARZ datasheet ADM213EARZ datasheet pdf ADM213EARZ pinout ADM213EARZ schematic ADM213EARZ equivalent ADM213EARZ replacement ADM213EARZ cross reference ADM213EARZ footprint ADM213EARZ price ADM213EARZ stock Analog Devices ADM213EARZ ADM213EARZ vs MAX213CDW

Komponen dan Istilah Terkait

Analog Devices ADM213EARZ ADM213EAR ADM213EARSZ HIN213EIBZ MAX213CDW MAX213CDWR RS-232 EIA-232E CCITT V.28 RS-232 transceiver line driver line receiver interface IC single-supply CMOS 28-pin SOIC SOIC family surface-mount package ±15 kV ESD protection shutdown control enable control 230 kbps data rate industrial control data acquisition legacy serial communication
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ