Analog Devices

ADM213ARSZ - 200kbps RS-232 Transceiver | Analog Devices

MPN: ADM213ARSZ ✓ Aktif
5 V Vdss EIA-232-E and V.28 Rds(on) 28-pin SSOP Package
MOQ: 1 |

ADM213ARSZ Ringkasan

The Analog Devices ADM213ARSZ is a 5 V powered CMOS RS-232 transceiver with four drivers, five receivers, shutdown and enable pins, and two receivers active during shutdown. It supports data rates up to 200 kbps and operates from a single 5 V supply while producing approximately ±9 V transmitter output swings through its on-board DC-to-DC converters. The device is packaged in a 28-pin SSOP.

An RS-232 transceiver is an interface integrated circuit that combines differential line drivers and receivers for serial data communication. It belongs to the EIA-232-E and V.28 interface hierarchy, translating between CMOS logic levels and the voltage levels used by RS-232 links. The ADM2xx family is intended for equipment where conventional ±12 V supplies are unavailable, making a single 5 V rail practical for modern embedded systems.

Key features include operation with external capacitors from 0.1 µF to 10 µF, a maximum data rate of 200 kbps, low-power shutdown, and receiver operation to ±30 V. Two receivers remain active in shutdown, allowing selected incoming signals to be monitored without keeping every receiver active. The integrated charge-pump converters provide approximately ±9 V transmitter swings, reducing the need for external negative-voltage generation.

The ADM213 combines four transmit channels with five receive channels in one package. Its shutdown and enable controls support systems that need to reduce power consumption when a serial link is inactive. The two shutdown-active receivers are especially useful where a modem, industrial terminal, or data acquisition system must detect an incoming activity or control indication while the main interface is powered down.

Typical uses include industrial serial consoles, instrumentation, point-of-sale equipment, security systems, test systems, and embedded control boards. The ±30 V receiver tolerance provides protection against higher-voltage RS-232 sources, while the integrated converters allow operation from a single 5 V supply. Designers should still protect the physical interface against surge, ESD, and cable transients according to the application environment.

The main design consideration is charge-pump capacitor selection. The ADM213 supports a broad external-capacitor range, but the selected capacitors, wiring, and voltage ratings must satisfy the Analog Devices datasheet requirements. Place the charge-pump and interface capacitors close to their associated pins, preserve a continuous ground return, and validate the implemented layout against the manufacturer's application guidance.

This technical overview combines the device's interface architecture, shutdown behavior, package constraints, and practical RS-232 design considerations into an engineering-focused guide. It also identifies pin-compatible alternatives and highlights the parameter checks required before replacing an existing ADM213ARSZ in production equipment.

Alternatif penggantian untuk ADM213ARSZ — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian ADM213ARSZ (sama faktor bentuk dan footprint) — berbeda di dalam Package, Product Type, Supply Voltage, Enable Control, Maximum Data Rate.

Analog Devices
Package: 28-SSOP
Product Type: RS-232 line transceiver
Supply Voltage: +5 V
Bandingkan dengan ADM213ARSZ →
Analog Devices
Package: 28-pin SOIC
Product Type: RS-232/V.28 line transceiver
Supply Voltage: 4.5 V to 5.5 V
Bandingkan dengan ADM213ARSZ →

ADM211ARSZ

✅ Drop-In
Analog Devices
📦 28-pin SSOP
RS-232 transceiver · 4 channels · 5 channels · 5 V · 200 kbps · 0.1 uF · EIA-232-E and V.28 · CMOS

Kontak untuk harga

Lihat Datasheet →

ADM211EARSZ

✅ Drop-In
📦 28-pin SSOP
Same 28-pin SSOP package and driver/receiver count; package marking and functional differences involving shutdown or enable behavior require confirmation.

📋 Alternatif referensi (tidak dalam katalog)

ADM213EARZ

✅ Drop-In
Analog Devices
📦 28-pin SSOP
RS-232/V.28 line transceiver · 4.5 V to 5.5 V · +5 V · 230 kbps · 4 · 5 · 2 · ±15 kV

Kontak untuk harga

Lihat Datasheet →

MAX213ECAI+T

✅ Drop-In
📦 28-pin SSOP
Same 28-pin SSOP footprint and comparable transmitter/receiver arrangement; data-rate, shutdown, and enable-pin differences require verification.

📋 Alternatif referensi (tidak dalam katalog)

HIN213ECAZ

✅ Drop-In
📦 28-pin SSOP
Same 28-pin SSOP format and RS-232 transceiver class; data-rate, charge-pump, enable, and shutdown differences must be verified.

📋 Alternatif referensi (tidak dalam katalog)

ADM213ARSZ Spesifikasi

Product Type RS-232 line driver/receiver transceiver
Tegangan Pemuat 5 V
Maximum Data Rate 200 kbps
Number of Drivers 4
Number of Receivers 5
Receivers Active in Shutdown 2
Transmitter Output Swing Approximately ±9 V
Receiver Input Voltage Tolerance ±30 V
External Capacitor Range 0.1 µF to 10 µF
Low-Power Shutdown Power ≤5 µW
Low-Power Rating 15 mW
Shutdown Control Yes
Enable Control Yes
Paket 28-pin SSOP
Tipe Mounting Surface mount
Device Function 4 transmitters and 5 receivers
Interface Standards EIA-232-E and V.28
Status RoHS Compliant

ADM213ARSZ 28-pin ssop Diamant Konfigurasi Panduan

Konfigurasi pin untuk ADM213ARSZ (28-pin ssop pakai pakai). Penomoran pin, fungsi, dan diagram koneksi ditetapkan dalam datasheet produsen. Lihatnya untuk footprint dan pedoman perpindahan paruh.

Diamant diagram pakai pakai 28-pin ssop untuk ADM213ARSZ

Tidak ada data diatribut pin yang tersedia untuk ADM213ARSZ.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

ADM213ARSZ cocok untuk 6 aplikasis: Industrial Serial Console Interface, Point-of-Sale Terminal Equipment, Test and Measurement Equipment, Security and Surveillance Systems, Embedded Data Acquisition Systems, Instrumentation and Process Control.

🏭

Industrial Serial Console Interface

The ADM213ARSZ fits industrial consoles and service ports that require a single 5 V supply and four RS-232 transmit channels. Its four drivers, five receivers, and 200 kbps maximum data rate provide adequate margin for configuration transfer, diagnostics, and supervisory commands. The integrated DC-to-DC converters produce approximately ±9 V transmitter swings without requiring a separate negative-voltage rail. In the enclosure, place the charge-pump capacitors close to the IC and keep the connector return path continuous to reduce susceptibility to ground potential differences between connected equipment.

🖥️

Point-of-Sale Terminal Equipment

The ADM213ARSZ can support point-of-sale terminals, receipt printers, scanners, and payment accessories that exchange data over RS-232. Four transmitters allow a terminal to connect several peripherals while five receivers provide broader input capacity, including monitoring of active signals during shutdown. Operation from one 5 V rail simplifies the power architecture in compact systems. The principal design consideration is ensuring that each transmitter and receiver is assigned to the correct peripheral and that cable transients are controlled through suitable external protection.

🔧

Test and Measurement Equipment

The ADM213ARSZ is suitable for laboratory and field-test equipment that must offer several RS-232 ports for legacy instruments. A maximum data rate of 200 kbps covers typical serial command and measurement-data traffic, while receiver tolerance to ±30 V improves compatibility with externally powered equipment. Two receivers active in shutdown can monitor control or alert lines while reducing overall power use. Engineers should evaluate grounding, isolate cable paths where necessary, and include protection appropriate to the maximum expected industrial voltage transient.

🎥

Security and Surveillance Systems

The ADM213ARSZ can connect access-control readers, cameras, alarm panels, and configuration tools using RS-232 links. Its shutdown mode and two always-active receivers help systems conserve power while preserving selected status monitoring functions. The 5 V supply, approximately ±9 V output swing, and integrated converters simplify implementation in compact control cabinets. Deployment near outdoor cables requires careful surge and ESD protection; the IC's ±30 V receiver tolerance should not be treated as a substitute for a properly engineered protection network.

📡

Embedded Data Acquisition Systems

The ADM213ARSZ fits embedded acquisition and control units that need multiple legacy RS-232 channels alongside a modern 5 V supply. Four drivers can support multiple command outputs, while five receivers provide additional monitoring inputs and two remain active during shutdown. The 200 kbps capability is useful for sensor-controller traffic and equipment configuration. Layout quality is particularly important because the on-board charge pumps and RS-232 outputs share a compact 28-pin SSOP footprint, so short capacitor connections and controlled ground return paths help maintain predictable behavior.

📊

Instrumentation and Process Control

The ADM213ARSZ can bridge a 5 V control board to RS-232 instruments, analyzers, and programmable laboratory devices. Its four drivers and five receivers support multiple signal paths, while the shutdown function reduces consumption when the instrument is idle. Two receivers active in shutdown allow a controller to detect external status indications without enabling the complete transceiver. For process-control installations, connect the interface reference to the system ground using an appropriate strategy and verify noise, isolation, and surge requirements for the connected cable length.

What is the ADM213ARSZ?
The ADM213ARSZ is a single-supply, 5 V RS-232 transceiver integrating four line drivers and five line receivers in a 28-pin SSOP package. According to the Analog Devices ADM213 product page, it supports operation up to 200 kbps, includes shutdown and enable pins, and keeps two receivers active while the device is in shutdown.
What is the maximum data rate of the ADM213ARSZ?
The ADM213ARSZ supports a maximum data rate of 200 kbps. This figure comes from Analog Devices' official ADM213 product description and makes the interface suitable for conventional and moderately high-speed RS-232 links. The complete system still requires verification of propagation delay, slew rate, cable length, and receiver bandwidth.
Where can I download the ADM213ARSZ datasheet?
The official ADM213ARSZ technical documentation is available from the Analog Devices ADM213 product page at https://www.analog.com/en/products/adm213.html. The page provides the manufacturer datasheet and product information, including the supported EIA-232-E and V.28 interfaces, 200 kbps operation, shutdown behavior, and the 5 V supply architecture.
Where can I find the ADM213ARSZ pinout?
The ADM213ARSZ pinout is documented in the manufacturer datasheet available from the Analog Devices ADM213 product page. The component uses a 28-pin SSOP, so the footprint has 28 numbered positions and should not be confused with the 28-pin SOIC version. Use the package drawing and pin-description table when assigning PCB tracks.
How many drivers and receivers does the ADM213ARSZ contain?
The ADM213ARSZ contains four RS-232 drivers and five receivers. Two of the five receivers remain active during shutdown, according to the Analog Devices product description. This mixed active/shutdown receiver arrangement supports low-power designs that still need to detect selected incoming signals or status indications.
Can the ADM213ARSZ operate from a single 5 V supply?
Yes, the ADM213ARSZ operates from a single 5 V supply and uses on-board DC-to-DC converters to produce approximately ±9 V transmitter output swings. This eliminates the need for a separate external negative-voltage rail in a typical RS-232 interface while retaining the bipolar signal levels expected by the communication standard.
What external capacitors are required for the ADM213ARSZ?
The ADM213ARSZ supports external charge-pump capacitors in the 0.1 µF to 10 µF range. The Analog Devices datasheet defines the required capacitor connections and voltage ratings. Values outside that stated range or unsuitable dielectric characteristics can alter startup behavior and transmitter output performance.
What happens to the receivers when the ADM213ARSZ enters shutdown?
Two receivers remain active during shutdown, while the remaining receiver and transmitter functions enter the low-power state. According to the manufacturer description, shutdown power can be reduced to 5 µW or less. This feature is useful when a system must monitor a remote indication without keeping the complete RS-232 interface operational.
What is the best drop-in replacement for the ADM213ARSZ?
ADM211ARSZ is the closest listed same-brand replacement candidate because it uses the same 28-pin SSOP format and is identified as a parametric equivalent. The Analog Devices family comparison describes it as completely replaceable without terminal or package modification. Final qualification should still confirm shutdown polarity, enable behavior, and every receiver connection.
Can MAX213ECAI+T replace an ADM213ARSZ?
MAX213ECAI+T can be considered as a cross-brand, pin-compatible 28-pin SSOP alternative, but installation should follow a detailed pin-function comparison. The available comparison identifies its package and terminals as compatible with ADM213ARSZ, while the ADM213ARSZ offers two receivers active in shutdown. Confirm the enable and shutdown polarities before production use.
When should I choose the ADM213ARSZ instead of ADM211ARSZ?
Choose the ADM213ARSZ when the design specifically benefits from its two receivers remaining active during shutdown or when the system has been qualified around the exact ADM213 feature set. Choose ADM211ARSZ when its interface behavior satisfies the application and you want the closest same-manufacturer, same-package alternative. The complete pin-description table remains the controlling reference.
Is the ADM213ARSZ suitable for industrial serial equipment?
Yes, the ADM213ARSZ is suitable for industrial RS-232 equipment because it supports EIA-232-E and V.28 communication, tolerates receiver inputs up to ±30 V, and includes low-power shutdown control. Industrial implementations should add the surge and ESD protection appropriate to the cable environment and validate the assembled interface under representative transients.
Where can I buy the ADM213ARSZ and check its lead time?
Use the Request a Quote form on this page to ask about ADM213ARSZ availability, lead time, order quantities, and shipment requirements. The form is the appropriate channel for current commercial confirmation because stock and delivery schedules can change independently of the technical specifications. No fixed commercial figure should be assumed for planning.
What is the price of the ADM213ARSZ?
The current commercial price for the ADM213ARSZ should be obtained through the Request a Quote form on this page. The form allows quantity, delivery, and traceability requirements to be included in the request, which is more useful for production planning than an isolated unit-price figure that may not reflect the requested order configuration.
Is the ADM213ARSZ currently in stock?
Current stock for the ADM213ARSZ should be confirmed through the Request a Quote form on this page. Inventory can vary by package, order quantity, and region, so an online product page does not guarantee a delivery schedule. Include your required quantity and target date in the request for an actionable response.
What are the key specifications of the ADM213ARSZ that engineers should know?
The key ADM213ARSZ specifications are a 5 V supply, four drivers, five receivers, operation up to 200 kbps, approximately ±9 V transmitter swings, receiver tolerance to ±30 V, and a 28-pin SSOP package. The device also supports 0.1 µF to 10 µF external capacitors, shutdown and enable pins, and two receivers that remain active in shutdown.

Data referensi engineering untuk ADM213ARSZ — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the ADM213ARSZ when a design needs four RS-232 drivers, five receivers, a single 5 V supply, and the ability to keep two receiver channels active during shutdown. This combination is particularly useful in industrial consoles, test equipment, and embedded controllers that monitor a remote indication while conserving power. ADM211ARSZ is the preferred same-brand candidate when its shutdown and enable behavior satisfy the circuit, but the two shutdown-active receivers are the clearest ADM213-specific feature to preserve. MAX213ECAI+T may suit a cross-brand migration after checking enable polarity, shutdown behavior, capacitor connections, and every receiver assignment against the ADM213ARSZ datasheet. HIN213ECAZ is a lower-confidence drop-in candidate because the available information establishes the package and interface class but not all key electrical values. For any replacement, treat the manufacturer pin-description table as the final authority and validate the assembled board for startup, data rate, output swing, and shutdown current.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini ADM211ARSZ ADM211EARSZ ADM213EARZ MAX213ECAI+T HIN213ECAZ
Package 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP 28-pin SSOP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Maxim Integrated Renesas Electronics
Shutdown Control Yes Yes Yes Yes Yes Yes

Diferensiator Kunci

  • Two receivers remain active during low-power shutdown (vsMAX213ECAI+T)
  • Four transmitters and five receivers in one 28-pin SSOP (vsHIN213ECAZ)
  • Single 5 V rail with integrated approximately ±9 V transmitter swings (vsADM211EARSZ)
  • RS-232 receiver tolerance extends to ±30 V (vsMAX213ECAI+T)

Catatan Desain

Place the ADM213ARSZ charge-pump capacitors close to the pins designated in the manufacturer datasheet. Keep each capacitor's connection to ground short and use a common ground plane that remains continuous beneath the interface section. The permitted external-capacitor range is broad at 0.1 µF to 10 µF, but the exact values, tolerance, dielectric, and voltage rating should follow the datasheet configuration selected for the intended data rate.

Route the RS-232 connector side of the circuit away from sensitive analog and high-speed digital traces. Maintain a low-impedance signal-ground path between the transceiver and connector, and connect the interface reference to the chassis or system ground according to the installation's grounding strategy. A common failure mode in multi-equipment systems is a ground-potential difference that appears as a receiver fault rather than a logic error.

Do not rely on the ADM213ARSZ's ±30 V receiver tolerance as a complete surge-protection solution. External protection may still be required for long cables, outdoor installations, or poorly grounded industrial environments. Also verify shutdown polarity, enable polarity, and which two receivers remain active before replacing the device because a mechanically compatible package does not by itself prove identical control behavior.

Provide a stable 5 V rail and decouple it close to the device supply pins using the capacitance and ESR requirements stated in the manufacturer datasheet. The ADM213 contains charge-pump converters for approximately ±9 V transmitter swings, so bypassing and grounding directly affect the interface's output behavior. Avoid routing charge-pump current through shared narrow traces or split grounds that increase transmitter-to-receiver ground noise.

Informasi Konformitas

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The LCSC product listing identifies the ADM213ARSZ as RoHS compliant. No additional REACH, lead-free, halogen-free, AEC-Q100, or conflict-minerals status is established.

Pencarian Terkait

ADM213ARSZ datasheet ADM213ARSZ pinout ADM213ARSZ datasheet pdf Analog Devices ADM213ARSZ ADM213ARSZ replacement ADM213ARSZ equivalent ADM213ARSZ cross reference ADM213ARSZ vs ADM211ARSZ ADM213ARSZ SSOP-28 footprint ADM213ARSZ RS-232 application circuit ADM213ARSZ price ADM213ARSZ stock ADM213ARSZ shutdown receivers ADM213ARSZ charge pump capacitors

Komponen dan Istilah Terkait

Analog Devices ADM213ARSZ ADM211ARSZ ADM211EARSZ ADM213EARZ MAX213ECAI+T HIN213ECAZ RS-232 transceiver EIA-232-E V.28 CMOS line driver CMOS line receiver Interface IC semiconductor single-supply RS-232 DC-to-DC converter charge-pump capacitor shutdown-active receiver 28-pin SSOP surface-mount package 200 kbps 5 V power supply ±9 V transmitter swing ±30 V receiver tolerance RoHS
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ