AKM (Asahi Kasei Microdevices)

AK5359ET - 24-Bit 192kHz Stereo Audio ADC | AKM

MPN: AK5359ET ✗ Akhir Hidup
4.5 V to 5.5 V Vdss 16-TSSOP Package
MOQ: 1 |

AK5359ET Ringkasan

Asahi Kasei Microdevices AK5359ET is a 24-bit stereo audio analog-to-digital converter with a maximum sampling rate of 192 kHz, packaged in a 16-TSSOP. It uses Enhanced dual-bit delta-sigma conversion and provides an I2S serial output interface. The device is intended for consumer and professional audio systems that require high-resolution digital audio capture.

An audio ADC is a mixed-signal integrated circuit that converts left and right analog audio voltages into a digital bit stream. The AK5359ET belongs to the delta-sigma ADC family, a category of converters commonly used for digital recording, microphones, mixing consoles, and consumer playback equipment. Its stereo architecture captures two analog audio channels while reducing the number of external conversion paths required on a system board.

The AK5359ET provides 24-bit resolution and a 192 kHz maximum sampling rate. Its stated sampling-rate range extends from 8 kHz to 216 kHz, allowing the same converter architecture to support voice, compact-disc-rate audio, high-resolution studio audio, and other digital recording formats. An I2S output supports connection to audio processors, digital audio codecs, DSP devices, and transport interfaces.

Internally, the converter uses Enhanced dual-bit delta-sigma techniques to achieve accurate conversion while controlling cost and power consumption. The 16-TSSOP package is approximately 4.40 mm wide and uses a 0.65 mm lead pitch. Because it is a surface-mount component, the package is supplied on tape and reel for automated assembly. The analog supply range is listed as 4.5 V to 5.5 V, while the digital supply range is listed as 3 V to 5.5 V.

Typical applications include professional audio recorders, USB audio interfaces, studio monitors, digital mixers, broadcast equipment, and consumer audio systems. Its 24-bit resolution is useful for retaining fine amplitude detail during conversion, while the 192 kHz rate supports high-resolution recording and professional playback workflows. In multi-channel systems, multiple converters can be synchronized according to the device's documented operating conditions.

Layout is critical in an audio ADC because analog input, digital clock, and I2S output paths must remain appropriately separated. Place input and supply bypass capacitors close to their associated pins, keep digital return currents away from sensitive analog inputs, and use a continuous ground reference beneath the device where the recommended layout permits. Confirm the complete pin assignments and decoupling values in the manufacturer datasheet before layout release.

This product page organizes the AK5359ET conversion format, sampling capability, supply requirements, package information, design considerations, and documented alternatives. It also highlights the distinction between true pin-compatible replacements and broader functional similarities so engineers can assess board-reuse risk before approving a substitution.

Alternatif penggantian untuk AK5359ET — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

AK5357ET-E2

✅ Drop-In
📦 16-TSSOP
Same 24-bit, two-channel, 16-TSSOP profile, but the listed comparison does not confirm identical pin mapping, clocking, supply ratings, or performance limits.

📋 Alternatif referensi (tidak dalam katalog)

AK5357KT

✅ Drop-In
📦 16-TSSOP
Same manufacturer, 24-bit, two-channel, 16-TSSOP family profile, with temperature-grade and electrical details requiring confirmation against the AK5359ET datasheet.

📋 Alternatif referensi (tidak dalam katalog)

AK5381VT

✅ Drop-In
📦 16-TSSOP
Same manufacturer and 24-bit, two-channel, 16-TSSOP profile, while the available comparison states that parameters and circuit structure can differ.

📋 Alternatif referensi (tidak dalam katalog)

AK5359ET Rating Maksimal & Karakteristik Listrik

Converter Type Stereo audio ADC
Architecture Enhanced dual-bit delta-sigma
Resolusi 24 bit
Maximum Sampling Rate 192 kHz
Stated Sampling-Rate Range 8 kHz to 216 kHz
Number of Channels 2 stereo channels
Digital Output Interface I2S
Analog Supply Voltage 4.5 V to 5.5 V
Digital Supply Voltage 3 V to 5.5 V
Paket 16-TSSOP
Package Width 4.40 mm
Lead Pitch 0.65 mm
Tipe Mounting Surface mount
Packaging Tape and reel
Lead-Free Status Lead-free
Product Status Obsolete

AK5359ET 4.40 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk AK5359ET (4.40 mm pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 4.40 mm untuk AK5359ET

Tidak ada data diatribut pin yang tersedia untuk AK5359ET.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

AK5359ET cocok untuk 6 aplikasis: Professional Audio Recorders, USB Audio Interfaces, Digital Mixing Consoles, Studio Monitor Controllers, Consumer Audio Systems, Broadcast and Acoustics Test Equipment.

🎧

Professional Audio Recorders

The AK5359ET fits professional recording equipment requiring two analog audio inputs, 24-bit conversion, and a maximum sampling rate of 192 kHz. Its I2S output can transfer converted stereo data to a digital signal processor or recording controller. The 16-TSSOP package keeps the converter compact for rack-mount and desktop equipment, although the obsolete lifecycle status requires careful long-term sourcing. Analog grounding, low-noise reference design, and clean clock routing remain central to achieving consistent results across both channels.

🖥️

USB Audio Interfaces

For a USB audio interface, the AK5359ET can convert stereo line or microphone-level signals before they reach a digital audio processor. Its 24-bit resolution and 192 kHz maximum sampling rate support high-resolution monitoring and recording modes. The I2S interface is suited to a USB audio codec or DSP with compatible framing and clocking. Designers should pay particular attention to analog input filtering, gain staging, bypass-capacitor placement, and the separation of the 4.5 V to 5.5 V analog supply from the digital interface supply.

🎚️

Digital Mixing Consoles

The AK5359ET can serve as the stereo conversion stage in a digital mixing console that accepts analog line-level channels. Its two-channel architecture reduces the converter count for paired inputs, while 24-bit data preserves amplitude detail for downstream level control and processing. The I2S output can feed an audio DSP, and its surface-mount 16-TSSOP package supports dense console-board layouts. Critical design work includes grounding, clock synchronization among multiple converters, input overload behavior, and ensuring that the selected board revision preserves the intended pin functions.

🔊

Studio Monitor Controllers

The AK5359ET is suitable for studio monitor controllers that digitize balanced analog audio feeds for switching, level control, or digital routing. The converter's 24-bit resolution and maximum 192 kHz sampling rate align with high-resolution monitoring workflows, while stereo capture supports left and right channel processing. Its I2S interface allows direct connection to a digital audio processor when format and clocking match. The design should maintain low-noise analog routing and place bypass capacitors near the supply pins to avoid introducing noise into the monitoring path.

📱

Consumer Audio Systems

The AK5359ET can be used in consumer audio equipment that captures stereo analog input at high resolution before routing it to a digital playback or recording subsystem. Its 24-bit conversion, I2S output, and compact 16-TSSOP package are appropriate for integrated home-audio electronics. The converter is suitable for source-selection boards, active speakers, and compact media appliances. Because the component is obsolete, new consumer designs should confirm availability early and compare it with current-generation converters before committing to a long product life.

📡

Broadcast and Acoustics Test Equipment

The AK5359ET can support measurement equipment that converts stereo analog acoustic or line signals into a high-resolution digital stream. The 192 kHz maximum sampling rate supports detailed waveform capture, while the 24-bit format retains small-signal amplitude information. The I2S output can feed a processor or storage system if timing requirements are satisfied. Calibration, input-referred noise, channel matching, and clock jitter are more important to measurement integrity than raw resolution alone, so the analog front end must be designed and tested as part of the measurement chain.

What is the AK5359ET?
The AK5359ET is a 24-bit, stereo delta-sigma audio analog-to-digital converter from Asahi Kasei Microdevices. It supports a maximum sampling rate of 192 kHz, uses an I2S digital interface, and is housed in a 16-TSSOP package. According to the manufacturer datasheet, it uses Enhanced dual-bit delta-sigma techniques and is suitable for consumer and professional audio equipment.
What are the key specifications of AK5359ET that engineers should know?
The AK5359ET provides 24-bit resolution, two stereo audio channels, a maximum 192 kHz sampling rate, and an I2S output interface in a 16-TSSOP package. The manufacturer datasheet also describes a stated sampling-rate range of 8 kHz to 216 kHz. Its analog supply range is 4.5 V to 5.5 V, while its digital supply range is 3 V to 5.5 V.
What does AK5359ET stand for and what type of circuit is it?
AK5359ET is the Asahi Kasei Microdevices part number for a stereo audio ADC, meaning analog-to-digital converter. It converts left and right analog audio signals into 24-bit digital data using an Enhanced dual-bit delta-sigma architecture. The converter's I2S output can feed a digital signal processor, audio codec, recording system, or other compatible digital-audio host.
What is the sampling rate of AK5359ET?
The AK5359ET supports a maximum sampling rate of 192 kHz. According to the manufacturer datasheet description, its overall stated sampling-rate range is 8 kHz to 216 kHz. This supports low-rate voice capture as well as high-resolution professional audio applications, with the operating mode and supported clock configuration determined by the surrounding system design.
What is the resolution and channel count of AK5359ET?
The AK5359ET converts two stereo analog channels at 24-bit resolution. Its delta-sigma conversion architecture is intended to provide accurate digital representation of audio while maintaining a compact 16-TSSOP package. The 24-bit format can preserve additional amplitude detail compared with a lower-resolution converter when the complete analog front end, clocking, and signal levels are implemented correctly.
What supply voltages does AK5359ET require?
The AK5359ET requires an analog supply of 4.5 V to 5.5 V and a digital supply of 3 V to 5.5 V. The component listing identifies separate analog and digital supply ranges, allowing the digital interface to operate from a lower rail than the analog conversion section. Use the manufacturer pin-description table and recommended application circuit to connect and decouple each supply domain.
Where can I download the AK5359ET datasheet PDF?
The AK5359ET datasheet is available through the AK5359ET document links listed on this page. The manufacturer document describes the stereo converter, Enhanced dual-bit delta-sigma architecture, 24-bit resolution, 192 kHz maximum sampling rate, I2S output, supply requirements, and application information. Before schematic or PCB release, verify the complete pin table, recommended capacitors, clock requirements, and operating limits against the current datasheet.
Where can I find the AK5359ET pinout?
The AK5359ET pinout is defined in the pin-description table of the manufacturer datasheet. The component uses a 16-pin TSSOP, but individual pin functions are not reproduced on this product page. Use the datasheet's 16-TSSOP drawing and pin table when assigning analog inputs, digital supplies, clock signals, and I2S outputs so that the physical board matches the selected device revision.
Where can I buy AK5359ET online?
The AK5359ET can be requested through the Request a Quote form on this product page. Because the part is listed as obsolete, buyers should request current availability, minimum order quantity, lot traceability, and any remaining-life information before committing the component to a new production design. For lifecycle-sensitive programs, obtain written confirmation of the exact AK5359ET suffix and package.
What is the price of AK5359ET?
Current AK5359ET pricing depends on quantity, remaining inventory, traceability requirements, and condition, so use the Request a Quote form on this page for a current offer. The component is listed as obsolete, which can make package and lot information more important than the nominal unit price. Request pricing for the exact 16-TSSOP ordering code and any applicable date-code or traceability requirements.
What is the lead time and stock status for AK5359ET?
Stock and lead time for the obsolete AK5359ET should be confirmed through the Request a Quote form on this page. Ask for available quantity, factory sealed units, date codes, and any authorized traceability documents. For an ongoing design, do not base production scheduling on an inventory snapshot; require a supplier confirmation for the quantity needed during manufacturing and field-service coverage.
Is AK5359ET in stock?
Current AK5359ET inventory should be checked through the Request a Quote form on this page. The device is categorized as obsolete, so availability can change without notice and may involve different date codes or provenance. Procurement should specify whether factory-sealed stock, mixed lots, or traceable product is required before accepting a quotation.
What is the best drop-in replacement for AK5359ET?
The AK5357ET-E2 is the closest documented same-brand candidate for a possible 16-TSSOP board reuse, but it should not be called a drop-in replacement until its pin assignments, clock requirements, supply details, and performance specifications are checked against the AK5359ET datasheet. The available cross-reference material shows a shared 24-bit, two-channel, 16-pin TSSOP profile, not a guarantee of pin-to-pin equivalence.
What can replace AK5359ET?
AK5357ET-E2, AK5357KT, and AK5381VT are the closest AKM-family candidates identified for board-reuse evaluation. Each must be checked against the AK5359ET for exact pin mapping, I2S format, clocking, supply voltage, and analog performance. A similar converter category and package alone are insufficient to establish drop-in compatibility, so schematic and PCB changes should be assumed possible until verified.
AK5359ET versus AK5357ET-E2: which is better for stereo audio capture?
The AK5359ET is the better documented choice when its exact AK5359ET specifications and availability are acceptable because it is specifically listed as a 24-bit, 192 kHz, two-channel I2S converter. The AK5357ET-E2 is a nearby AKM candidate with a broadly similar converter profile, but the available comparison does not establish identical pinout, noise, distortion, clocking, or supply behavior. Verify the datasheets before substitution.
Is AK5359ET suitable for professional audio equipment?
Yes, the AK5359ET is suitable for professional audio capture when its 24-bit resolution, 192 kHz maximum sampling rate, and stereo delta-sigma conversion architecture meet the system requirements. Its I2S output supports integration with professional codecs, DSPs, and recording processors. Because it is listed as obsolete, engineers should also assess long-term supply risk, board-level performance verification, and availability of an active replacement.

Data referensi engineering untuk AK5359ET — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the AK5359ET when an existing design specifically calls for a 24-bit stereo audio ADC with an I2S interface, a 192 kHz maximum sampling rate, and a 16-TSSOP footprint. Its documented 8 kHz to 216 kHz sampling range, Enhanced dual-bit delta-sigma architecture, and separate analog and digital supply ranges support a broad range of consumer and professional audio products. Consider AK5357ET-E2 when its temperature grade and electrical details are preferable, but require pin, clock, and performance verification. AK5357KT offers another same-manufacturer family candidate, while AK5381VT may be considered when its differing circuit structure is acceptable. Because the AK5359ET is obsolete, new designs should balance performance continuity against long-term availability and the engineering effort required to qualify a replacement.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini AK5357ET-E2 AK5357KT AK5381VT
Package 16-TSSOP 16-TSSOP 16-TSSOP 16-TSSOP
Brand Asahi Kasei Microdevices Asahi Kasei Microdevices Asahi Kasei Microdevices Asahi Kasei Microdevices
Converter Type Stereo audio ADC Stereo audio ADC Stereo audio ADC Stereo audio ADC
Resolution 24 bit 24 bit 24 bit 24 bit
Lead Pitch 0.65 mm 0.65 mm 0.65 mm 0.65 mm

Diferensiator Kunci

  • Directly identified 192 kHz maximum sampling rate (vsAK5357ET-E2)
  • Documented 8 kHz to 216 kHz stated operating range (vsAK5357KT)
  • Identified I2S output for digital-audio integration (vsAK5381VT)
  • Separate analog and digital supply specifications (vsAK5357ET-E2)

Catatan Desain

Follow the manufacturer recommended-layout section when placing bypass capacitors, analog inputs, digital outputs, and supply connections. Keep the analog input traces short, route digital clock and I2S signals away from sensitive input nodes, and provide a continuous ground reference where the recommended layout permits. The separate analog and digital supply ranges make rail partitioning and local return-current control especially important.

Treat the converter clock and I2S outputs as high-speed digital signals even though the audio bandwidth is comparatively low. Use short routes, continuous reference planes, and termination only where required by the clock and output specifications. Confirm output timing, data alignment, and allowed clock ratios from the datasheet before connecting the device to a DSP or codec.

Do not treat a matching 16-TSSOP outline as proof that a replacement is pin-compatible. Verify every pin function, supply requirement, I2S data format, master-clock configuration, reset method, and analog performance rating. A component substitution should be released only after schematic comparison, clock validation, and board-level audio testing confirm equivalent operation.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Yes
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The listed 16-TSSOP component is identified as lead-free. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals statuses are not stated in the available product information.

Data disahkan pada: 2026-11-11 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

AK5359ET datasheet AK5359ET pinout AK5359ET datasheet pdf AK5359ET specifications AK5359ET 16-TSSOP AK5359ET 24-bit ADC AK5359ET 192kHz AK5359ET I2S AK5359ET equivalent AK5359ET replacement AK5359ET cross reference AK5359ET vs AK5357ET-E2 AK5359ET vs AK5381VT AK5359ET price AK5359ET obsolete

Komponen dan Istilah Terkait

Asahi Kasei Microdevices AK5359ET AK5357ET-E2 AK5357KT AK5381VT audio analog-to-digital converter ADC delta-sigma ADC dual-bit delta-sigma I2S 24-bit resolution 192 kHz sampling rate 16-TSSOP TSSOP family surface-mount package stereo audio conversion consumer audio professional audio equipment digital signal processor analog supply voltage digital supply voltage RoHS REACH lead-free
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ