AK5359ET - 24-Bit 192kHz Stereo Audio ADC | AKM
부품 번호: AK5359ET ✗ 단종AK5359ET 개요
An audio ADC is a mixed-signal integrated circuit that converts left and right analog audio voltages into a digital bit stream. The AK5359ET belongs to the delta-sigma ADC family, a category of converters commonly used for digital recording, microphones, mixing consoles, and consumer playback equipment. Its stereo architecture captures two analog audio channels while reducing the number of external conversion paths required on a system board.
The AK5359ET provides 24-bit resolution and a 192 kHz maximum sampling rate. Its stated sampling-rate range extends from 8 kHz to 216 kHz, allowing the same converter architecture to support voice, compact-disc-rate audio, high-resolution studio audio, and other digital recording formats. An I2S output supports connection to audio processors, digital audio codecs, DSP devices, and transport interfaces.
Internally, the converter uses Enhanced dual-bit delta-sigma techniques to achieve accurate conversion while controlling cost and power consumption. The 16-TSSOP package is approximately 4.40 mm wide and uses a 0.65 mm lead pitch. Because it is a surface-mount component, the package is supplied on tape and reel for automated assembly. The analog supply range is listed as 4.5 V to 5.5 V, while the digital supply range is listed as 3 V to 5.5 V.
Typical applications include professional audio recorders, USB audio interfaces, studio monitors, digital mixers, broadcast equipment, and consumer audio systems. Its 24-bit resolution is useful for retaining fine amplitude detail during conversion, while the 192 kHz rate supports high-resolution recording and professional playback workflows. In multi-channel systems, multiple converters can be synchronized according to the device's documented operating conditions.
Layout is critical in an audio ADC because analog input, digital clock, and I2S output paths must remain appropriately separated. Place input and supply bypass capacitors close to their associated pins, keep digital return currents away from sensitive analog inputs, and use a continuous ground reference beneath the device where the recommended layout permits. Confirm the complete pin assignments and decoupling values in the manufacturer datasheet before layout release.
This product page organizes the AK5359ET conversion format, sampling capability, supply requirements, package information, design considerations, and documented alternatives. It also highlights the distinction between true pin-compatible replacements and broader functional similarities so engineers can assess board-reuse risk before approving a substitution.
드롭인 대체품: AK5359ET — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
AK5357ET-E2
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
AK5357KT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
AK5381VT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
AK5359ET 최대 정격 & 전기적 특성
| Converter Type | Stereo audio ADC |
| Architecture | Enhanced dual-bit delta-sigma |
| 분해능 | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Stated Sampling-Rate Range | 8 kHz to 216 kHz |
| Number of Channels | 2 stereo channels |
| Digital Output Interface | I2S |
| Analog Supply Voltage | 4.5 V to 5.5 V |
| Digital Supply Voltage | 3 V to 5.5 V |
| 패키지 | 16-TSSOP |
| Package Width | 4.40 mm |
| Lead Pitch | 0.65 mm |
| 실장 유형 | Surface mount |
| Packaging | Tape and reel |
| Lead-Free Status | Lead-free |
| Product Status | Obsolete |
AK5359ET 4.40 mm 핀 구성 가이드
AK5359ET(4.40 mm 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: AK5359ET.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
AK5359ET 적합 용도: 6 애플리케이션s: Professional Audio Recorders, USB Audio Interfaces, Digital Mixing Consoles, Studio Monitor Controllers, Consumer Audio Systems, Broadcast and Acoustics Test Equipment.
Professional Audio Recorders
The AK5359ET fits professional recording equipment requiring two analog audio inputs, 24-bit conversion, and a maximum sampling rate of 192 kHz. Its I2S output can transfer converted stereo data to a digital signal processor or recording controller. The 16-TSSOP package keeps the converter compact for rack-mount and desktop equipment, although the obsolete lifecycle status requires careful long-term sourcing. Analog grounding, low-noise reference design, and clean clock routing remain central to achieving consistent results across both channels.
추천
USB Audio Interfaces
For a USB audio interface, the AK5359ET can convert stereo line or microphone-level signals before they reach a digital audio processor. Its 24-bit resolution and 192 kHz maximum sampling rate support high-resolution monitoring and recording modes. The I2S interface is suited to a USB audio codec or DSP with compatible framing and clocking. Designers should pay particular attention to analog input filtering, gain staging, bypass-capacitor placement, and the separation of the 4.5 V to 5.5 V analog supply from the digital interface supply.
추천
Digital Mixing Consoles
The AK5359ET can serve as the stereo conversion stage in a digital mixing console that accepts analog line-level channels. Its two-channel architecture reduces the converter count for paired inputs, while 24-bit data preserves amplitude detail for downstream level control and processing. The I2S output can feed an audio DSP, and its surface-mount 16-TSSOP package supports dense console-board layouts. Critical design work includes grounding, clock synchronization among multiple converters, input overload behavior, and ensuring that the selected board revision preserves the intended pin functions.
추천
Studio Monitor Controllers
The AK5359ET is suitable for studio monitor controllers that digitize balanced analog audio feeds for switching, level control, or digital routing. The converter's 24-bit resolution and maximum 192 kHz sampling rate align with high-resolution monitoring workflows, while stereo capture supports left and right channel processing. Its I2S interface allows direct connection to a digital audio processor when format and clocking match. The design should maintain low-noise analog routing and place bypass capacitors near the supply pins to avoid introducing noise into the monitoring path.
추천
Consumer Audio Systems
The AK5359ET can be used in consumer audio equipment that captures stereo analog input at high resolution before routing it to a digital playback or recording subsystem. Its 24-bit conversion, I2S output, and compact 16-TSSOP package are appropriate for integrated home-audio electronics. The converter is suitable for source-selection boards, active speakers, and compact media appliances. Because the component is obsolete, new consumer designs should confirm availability early and compare it with current-generation converters before committing to a long product life.
추천
Broadcast and Acoustics Test Equipment
The AK5359ET can support measurement equipment that converts stereo analog acoustic or line signals into a high-resolution digital stream. The 192 kHz maximum sampling rate supports detailed waveform capture, while the 24-bit format retains small-signal amplitude information. The I2S output can feed a processor or storage system if timing requirements are satisfied. Calibration, input-referred noise, channel matching, and clock jitter are more important to measurement integrity than raw resolution alone, so the analog front end must be designed and tested as part of the measurement chain.
추천
추천 제품 요약
엔지니어링 참조 데이터: AK5359ET — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | AK5357ET-E2 | AK5357KT | AK5381VT |
|---|---|---|---|---|
| Package | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP |
| Brand | Asahi Kasei Microdevices | Asahi Kasei Microdevices | Asahi Kasei Microdevices | Asahi Kasei Microdevices |
| Converter Type | Stereo audio ADC | Stereo audio ADC | Stereo audio ADC | Stereo audio ADC |
| Resolution | 24 bit | 24 bit | 24 bit | 24 bit |
| Lead Pitch | 0.65 mm | 0.65 mm | 0.65 mm | 0.65 mm |
주요 차별점
- Directly identified 192 kHz maximum sampling rate (vs AK5357ET-E2)
- Documented 8 kHz to 216 kHz stated operating range (vs AK5357KT)
- Identified I2S output for digital-audio integration (vs AK5381VT)
- Separate analog and digital supply specifications (vs AK5357ET-E2)
설계 노트
Follow the manufacturer recommended-layout section when placing bypass capacitors, analog inputs, digital outputs, and supply connections. Keep the analog input traces short, route digital clock and I2S signals away from sensitive input nodes, and provide a continuous ground reference where the recommended layout permits. The separate analog and digital supply ranges make rail partitioning and local return-current control especially important.
Treat the converter clock and I2S outputs as high-speed digital signals even though the audio bandwidth is comparatively low. Use short routes, continuous reference planes, and termination only where required by the clock and output specifications. Confirm output timing, data alignment, and allowed clock ratios from the datasheet before connecting the device to a DSP or codec.
Do not treat a matching 16-TSSOP outline as proof that a replacement is pin-compatible. Verify every pin function, supply requirement, I2S data format, master-clock configuration, reset method, and analog performance rating. A component substitution should be released only after schematic comparison, clock validation, and board-level audio testing confirm equivalent operation.
규정 준수 정보
The listed 16-TSSOP component is identified as lead-free. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals statuses are not stated in the available product information.