AK5359ET - 24-Bit 192kHz Stereo Audio ADC | AKM
MPN: AK5359ET ✗ Cuối đờiAK5359ET Tóm tắt
An audio ADC is a mixed-signal integrated circuit that converts left and right analog audio voltages into a digital bit stream. The AK5359ET belongs to the delta-sigma ADC family, a category of converters commonly used for digital recording, microphones, mixing consoles, and consumer playback equipment. Its stereo architecture captures two analog audio channels while reducing the number of external conversion paths required on a system board.
The AK5359ET provides 24-bit resolution and a 192 kHz maximum sampling rate. Its stated sampling-rate range extends from 8 kHz to 216 kHz, allowing the same converter architecture to support voice, compact-disc-rate audio, high-resolution studio audio, and other digital recording formats. An I2S output supports connection to audio processors, digital audio codecs, DSP devices, and transport interfaces.
Internally, the converter uses Enhanced dual-bit delta-sigma techniques to achieve accurate conversion while controlling cost and power consumption. The 16-TSSOP package is approximately 4.40 mm wide and uses a 0.65 mm lead pitch. Because it is a surface-mount component, the package is supplied on tape and reel for automated assembly. The analog supply range is listed as 4.5 V to 5.5 V, while the digital supply range is listed as 3 V to 5.5 V.
Typical applications include professional audio recorders, USB audio interfaces, studio monitors, digital mixers, broadcast equipment, and consumer audio systems. Its 24-bit resolution is useful for retaining fine amplitude detail during conversion, while the 192 kHz rate supports high-resolution recording and professional playback workflows. In multi-channel systems, multiple converters can be synchronized according to the device's documented operating conditions.
Layout is critical in an audio ADC because analog input, digital clock, and I2S output paths must remain appropriately separated. Place input and supply bypass capacitors close to their associated pins, keep digital return currents away from sensitive analog inputs, and use a continuous ground reference beneath the device where the recommended layout permits. Confirm the complete pin assignments and decoupling values in the manufacturer datasheet before layout release.
This product page organizes the AK5359ET conversion format, sampling capability, supply requirements, package information, design considerations, and documented alternatives. It also highlights the distinction between true pin-compatible replacements and broader functional similarities so engineers can assess board-reuse risk before approving a substitution.
Bộ thay thế dễ dàng lắp đặt cho AK5359ET — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
AK5357ET-E2
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
AK5357KT
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
AK5381VT
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
AK5359ET Tỷ lệ tối đa & tính chất điện
| Converter Type | Stereo audio ADC |
| Architecture | Enhanced dual-bit delta-sigma |
| Độ phân giải | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Stated Sampling-Rate Range | 8 kHz to 216 kHz |
| Number of Channels | 2 stereo channels |
| Digital Output Interface | I2S |
| Analog Supply Voltage | 4.5 V to 5.5 V |
| Digital Supply Voltage | 3 V to 5.5 V |
| Hộp | 16-TSSOP |
| Package Width | 4.40 mm |
| Lead Pitch | 0.65 mm |
| Kiểu lắp đặt | Surface mount |
| Packaging | Tape and reel |
| Lead-Free Status | Lead-free |
| Product Status | Obsolete |
Hướng dẫn cấu hình chân AK5359ET 4.40 mm
Cấu hình chân cho AK5359ET (4.40 mm gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho AK5359ET.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
AK5359ET phù hợp cho 6 Áp dụngs: Professional Audio Recorders, USB Audio Interfaces, Digital Mixing Consoles, Studio Monitor Controllers, Consumer Audio Systems, Broadcast and Acoustics Test Equipment.
Professional Audio Recorders
The AK5359ET fits professional recording equipment requiring two analog audio inputs, 24-bit conversion, and a maximum sampling rate of 192 kHz. Its I2S output can transfer converted stereo data to a digital signal processor or recording controller. The 16-TSSOP package keeps the converter compact for rack-mount and desktop equipment, although the obsolete lifecycle status requires careful long-term sourcing. Analog grounding, low-noise reference design, and clean clock routing remain central to achieving consistent results across both channels.
Được đề xuất
USB Audio Interfaces
For a USB audio interface, the AK5359ET can convert stereo line or microphone-level signals before they reach a digital audio processor. Its 24-bit resolution and 192 kHz maximum sampling rate support high-resolution monitoring and recording modes. The I2S interface is suited to a USB audio codec or DSP with compatible framing and clocking. Designers should pay particular attention to analog input filtering, gain staging, bypass-capacitor placement, and the separation of the 4.5 V to 5.5 V analog supply from the digital interface supply.
Được đề xuất
Digital Mixing Consoles
The AK5359ET can serve as the stereo conversion stage in a digital mixing console that accepts analog line-level channels. Its two-channel architecture reduces the converter count for paired inputs, while 24-bit data preserves amplitude detail for downstream level control and processing. The I2S output can feed an audio DSP, and its surface-mount 16-TSSOP package supports dense console-board layouts. Critical design work includes grounding, clock synchronization among multiple converters, input overload behavior, and ensuring that the selected board revision preserves the intended pin functions.
Được đề xuất
Studio Monitor Controllers
The AK5359ET is suitable for studio monitor controllers that digitize balanced analog audio feeds for switching, level control, or digital routing. The converter's 24-bit resolution and maximum 192 kHz sampling rate align with high-resolution monitoring workflows, while stereo capture supports left and right channel processing. Its I2S interface allows direct connection to a digital audio processor when format and clocking match. The design should maintain low-noise analog routing and place bypass capacitors near the supply pins to avoid introducing noise into the monitoring path.
Được đề xuất
Consumer Audio Systems
The AK5359ET can be used in consumer audio equipment that captures stereo analog input at high resolution before routing it to a digital playback or recording subsystem. Its 24-bit conversion, I2S output, and compact 16-TSSOP package are appropriate for integrated home-audio electronics. The converter is suitable for source-selection boards, active speakers, and compact media appliances. Because the component is obsolete, new consumer designs should confirm availability early and compare it with current-generation converters before committing to a long product life.
Được đề xuất
Broadcast and Acoustics Test Equipment
The AK5359ET can support measurement equipment that converts stereo analog acoustic or line signals into a high-resolution digital stream. The 192 kHz maximum sampling rate supports detailed waveform capture, while the 24-bit format retains small-signal amplitude information. The I2S output can feed a processor or storage system if timing requirements are satisfied. Calibration, input-referred noise, channel matching, and clock jitter are more important to measurement integrity than raw resolution alone, so the analog front end must be designed and tested as part of the measurement chain.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho AK5359ET — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | AK5357ET-E2 | AK5357KT | AK5381VT |
|---|---|---|---|---|
| Package | 16-TSSOP | 16-TSSOP | 16-TSSOP | 16-TSSOP |
| Brand | Asahi Kasei Microdevices | Asahi Kasei Microdevices | Asahi Kasei Microdevices | Asahi Kasei Microdevices |
| Converter Type | Stereo audio ADC | Stereo audio ADC | Stereo audio ADC | Stereo audio ADC |
| Resolution | 24 bit | 24 bit | 24 bit | 24 bit |
| Lead Pitch | 0.65 mm | 0.65 mm | 0.65 mm | 0.65 mm |
Bảo phân biệt quan trọng
- Directly identified 192 kHz maximum sampling rate (vsAK5357ET-E2)
- Documented 8 kHz to 216 kHz stated operating range (vsAK5357KT)
- Identified I2S output for digital-audio integration (vsAK5381VT)
- Separate analog and digital supply specifications (vsAK5357ET-E2)
Ghi chú thiết kế
Follow the manufacturer recommended-layout section when placing bypass capacitors, analog inputs, digital outputs, and supply connections. Keep the analog input traces short, route digital clock and I2S signals away from sensitive input nodes, and provide a continuous ground reference where the recommended layout permits. The separate analog and digital supply ranges make rail partitioning and local return-current control especially important.
Treat the converter clock and I2S outputs as high-speed digital signals even though the audio bandwidth is comparatively low. Use short routes, continuous reference planes, and termination only where required by the clock and output specifications. Confirm output timing, data alignment, and allowed clock ratios from the datasheet before connecting the device to a DSP or codec.
Do not treat a matching 16-TSSOP outline as proof that a replacement is pin-compatible. Verify every pin function, supply requirement, I2S data format, master-clock configuration, reset method, and analog performance rating. A component substitution should be released only after schematic comparison, clock validation, and board-level audio testing confirm equivalent operation.
Thông tin tuân thủ
The listed 16-TSSOP component is identified as lead-free. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals statuses are not stated in the available product information.