Microchip Technology

ATSAME54P20A-AU - 120MHz Cortex-M4F 1MB MCU | Microchip Technology

MPN: ATSAME54P20A-AU ✓ Aktif
3.3 V Vdss 128-pin TQFP Package 120 MHz Speed 1 MB Memory
MOQ: 1 |

ATSAME54P20A-AU Ringkasan

The Microchip Technology ATSAME54P20A-AU is a 32-bit ARM Cortex-M4F microcontroller with a floating-point unit, operating up to 120 MHz, and offering up to 1 MB of dual-panel Flash memory with ECC. It is packaged in a 128-pin TQFP measuring 14 mm by 14 mm and is configured for 3.3 V operation. The device is designed for embedded control applications that require real-time processing, reliable nonvolatile storage, and extensive communications peripherals.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripheral interfaces, and control logic into one device. The ATSAME54 belongs to the SAM E54 high-performance microcontroller family. Its Cortex-M4F core adds hardware floating-point acceleration, helping improve computational performance in control, signal-processing, and communications workloads while retaining the low-complexity architecture suited to embedded systems.

Key capabilities include up to 120 MHz operation, up to 1 MB of dual-panel Flash with ECC, and up to 256 KB of SRAM with ECC. The family also provides a 10/100 Ethernet MAC and two CAN-FD controllers, making it appropriate for industrial networking, motor control, gateway equipment, and connected automation systems. ECC-protected memory supports data-integrity requirements in applications where uncontrolled bit errors are unacceptable.

The ATSAME54P20A-AU is identified in the manufacturer material as a 1 MB Flash device in a 128-TQFP package. The -AU ordering code corresponds to the tray packaging shown in the product listings. Applications using the device should account for its 120-pin TQFP footprint, 14 mm by 14 mm body size, 3.3 V supply requirement, and the pin assignments defined for the specific ATSAME54P20A device.

The target MPN is suitable for industrial automation, factory equipment, building controls, motor-control platforms, Ethernet-connected controllers, and CAN-FD network nodes. Its combination of high-frequency Cortex-M4F processing, ECC memory, Ethernet MAC, and dual CAN-FD support allows multiple communications functions to be consolidated in a single controller rather than requiring separate interface devices.

PCB implementation requires careful decoupling near the supply pins, correct grounding, and controlled routing for high-speed and communication signals. Firmware development requires the appropriate SAM E54 device support, startup files, linker configuration, clock setup, and peripheral initialization. The manufacturer application information and the ATSAME54 128-pin motor-control reference material should guide pin multiplexing, peripheral routing, and board-level validation.

This product record combines the manufacturer specifications, exact MPN packaging details, available drop-in alternatives, pricing references, comparison parameters, and implementation guidance. It highlights the engineering considerations needed to decide whether the ATSAME54P20A-AU is suitable for an industrial control design and how to evaluate its closest same-package replacements.

Alternatif penggantian untuk ATSAME54P20A-AU — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian ATSAME54P20A-AU (sama faktor bentuk dan footprint) — berbeda di dalam Operating Temperature, Package, SRAM, Core Architecture, Flash Memory.

Microchip Technology
Operating Temperature: -40C to +85C (industrial)
Package: 100-pin TQFP (14x14 mm)
SRAM: 192 KB with ECC
Bandingkan dengan ATSAME54P20A-AU →
Microchip Technology
Operating Temperature: -40 C to +85 C (AU grade)
Package: 128-TQFP (14x14 mm)
SRAM: 128 KB (ECC)
Bandingkan dengan ATSAME54P20A-AU →
Microchip Technology
Operating Temperature: -40C to +125C (extended)
Package: 128-pin TQFP (14x14 mm)
SRAM: 256 KB (with ECC)
Bandingkan dengan ATSAME54P20A-AU →
Microchip Technology
Operating Temperature: -40C to +85C (industrial, "AU" grade)
Package: 128-TQFP (14x14 mm)
SRAM: 256 KB with ECC
Bandingkan dengan ATSAME54P20A-AU →
Microchip Technology
Package: 128-pin TQFP (14x14 mm)
SRAM: 256 KB (with ECC)
Flash Memory: 1 MB (Dual Panel, with ECC)
Bandingkan dengan ATSAME54P20A-AU →

ATSAME54P20A-AU-EFP

✅ Drop-In
Microchip Technology
📦 128-TQFP (14x14 mm)
ARM Cortex-M4F with FPU and DSP extensions · 120 MHz · 1 MB (1M x 8) with ECC, dual-panel · 256 KB with ECC · 128-TQFP (14x14 mm) · 128 · -40C to +85C (industrial, "AU" grade)

Kontak untuk harga

Lihat Datasheet →

ATSAME54P20A-AFT

✅ Drop-In
Microchip Technology
📦 128-TQFP (14x14 mm)
ARM Cortex-M4F with single-precision FPU · 120 MHz · 1 MB (dual-panel with ECC) · 256 KB (with ECC) · 128-pin TQFP (14x14 mm) · 3.3 V typical · 10/100 Mbps MAC with IEEE 1588 · USB 2.0 Full-Speed with on-chip PHY

Kontak untuk harga

Lihat Datasheet →

ATSAME54P20A-AU Rating Maksimal & Karakteristik Listrik

Product Type 32-bit ARM Cortex-M4F microcontroller
Processor Core ARM Cortex-M4F with floating-point unit
Maximum CPU Frequency 120 MHz
Flash Memory 1 MB
Flash Organization 1M x 8 bits
Flash Architecture Dual-panel Flash with ECC
Maximum SRAM 256 KB with ECC
Tegangan Pemuat 3.3 V
Ethernet Support 10/100 Ethernet MAC
CAN-FD Controllers 2
Paket 128-pin TQFP
Package Dimensions 14 mm x 14 mm
Tipe Mounting Surface mount
Suhu Kerja -40C to +85C
Core Architecture ARMv7-M with hardware floating point
Memory ECC Supported for Flash and SRAM

ATSAME54P20A-AU 14 mm x 14 mm Diamant Konfigurasi Panduan

Konfigurasi pin untuk ATSAME54P20A-AU (14 mm x 14 mm pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai 14 mm x 14 mm untuk ATSAME54P20A-AU

Tidak ada data diatribut pin yang tersedia untuk ATSAME54P20A-AU.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

ATSAME54P20A-AU cocok untuk 6 aplikasis: Industrial Motor Control, CAN-FD Networked Controller, Ethernet Industrial Gateway, Factory Automation Controller, Building Automation Equipment, Connected Sensor Hub.

🏭

Industrial Motor Control

The ATSAME54P20A-AU fits industrial motor-control platforms that require deterministic 120 MHz Cortex-M4F processing, up to 256 KB of ECC-protected SRAM, and a large 128-pin TQFP pin count for timers, PWM outputs, control loops, and external interfaces. Its hardware floating-point unit is useful for control calculations that would otherwise increase CPU utilization. The two CAN-FD controllers can support networked motion systems, while the 10/100 Ethernet MAC supports supervisory communications. Microchip’s ATSAME54 motor-control plug-in module information identifies the family as suitable for 128-pin motor-control development, although the final design must verify the required timer channels, analog inputs, and external power stage.

🌐

CAN-FD Networked Controller

The ATSAME54P20A-AU is well suited to industrial CAN-FD nodes because it combines two CAN-FD controllers with a 120 MHz Cortex-M4F core and up to 256 KB of ECC-protected SRAM. Engineers can run protocol handling, diagnostics, and local control concurrently while using the Ethernet MAC for supervisory links. The 1 MB dual-panel Flash provides substantial room for application code, boot software, and configuration data, with ECC helping protect firmware integrity. The 128-TQFP package also offers enough pins for isolated CAN-FD transceivers, supervision signals, and digital I/O. Firmware qualification should include bus timing, fault recovery, termination strategy, and validation under the worst expected network traffic.

🖥️

Ethernet Industrial Gateway

The ATSAME54P20A-AU can serve as the control processor in a compact Ethernet industrial gateway where 120 MHz performance, ECC-protected memory, and real-time peripheral handling are required. Its integrated 10/100 Ethernet MAC supports network traffic processing, while the two CAN-FD channels allow the gateway to bridge or monitor lower-level industrial networks. The 1 MB of Flash accommodates protocol stacks, configuration data, and secure update mechanisms, and up to 256 KB of SRAM supports packet buffering and concurrent control tasks. Unlike a small 32-pin microcontroller, the 128-TQFP footprint provides extensive I/O for status indicators, configuration interfaces, and isolated communications hardware. Board design should route Ethernet differential pairs according to the manufacturer layout guidance.

⚙️

Factory Automation Controller

The ATSAME54P20A-AU supports factory-automation controllers that must combine real-time machine control with communications and diagnostic intelligence. A 120 MHz Cortex-M4F core can execute motion, sequencing, and sensor-processing tasks, while hardware floating-point acceleration benefits filter and compensation algorithms. ECC-protected Flash and SRAM improve integrity in equipment where silent corruption could create unsafe operating conditions. The 10/100 Ethernet MAC provides a management path, and two CAN-FD controllers can connect sensors, drives, or remote I/O modules over high-speed industrial networks. With 128 pins, the controller can expose substantial digital I/O and analog-control channels without an external parallel interface device. Production firmware should add peripheral fault checks and verify startup behavior across all supply and temperature conditions.

🏠

Building Automation Equipment

The ATSAME54P20A-AU is appropriate for building-automation equipment that monitors sensors, controls actuators, and maintains network connectivity. Its 120 MHz Cortex-M4F processor provides ample performance for scheduling, communications, and local diagnostics, while the two CAN-FD channels can support building-network devices. The Ethernet MAC enables integration with supervisory infrastructure, and the large Flash capacity can hold multiple protocol stacks and update images. ECC-protected memory is particularly useful in long-life equipment where transient faults must be detected rather than silently altering control state. The 128-TQFP package supports isolated communication interfaces, digital outputs, and sensing connections. The design should use robust external protection because building controllers may face long wiring runs, transients, and temperature variation beyond the MCU itself.

🧩

Connected Sensor Hub

The ATSAME54P20A-AU can act as a connected sensor hub for industrial IoT equipment requiring local filtering, control, and two forms of network communication. The 120 MHz Cortex-M4F core can process several sensor streams, perform scaling and filtering, and use hardware floating-point operations where algorithm workloads justify them. Up to 256 KB of ECC-protected SRAM provides room for acquisition buffers, while 1 MB of ECC-protected dual-panel Flash supports networking stacks and configuration data. Ethernet carries higher-level traffic, and CAN-FD supports local sensors or actuators. The 128-pin package provides extensive connections for analog and digital sensor interfaces. Engineering validation should include clock accuracy, sensor timing, watchdog behavior, and recovery after network or power disturbances.

Ringkasan Produk Direkomendasikan

ATSAME54P20A-AU-EFP Microchip Technology Digunakan di dalam: Industrial Motor Control, CAN-FD Networked Controller, Ethernet Industrial Gateway, Factory Automation Controller, Connected Sensor Hub ATSAME54P20A Base device used by the 128-pin motor-control plug-in module Digunakan di dalam: Industrial Motor Control, CAN-FD Networked Controller, Factory Automation Controller, Building Automation Equipment, Connected Sensor Hub ATSAME54P20A-AFT Microchip Technology Digunakan di dalam: Ethernet Industrial Gateway, Building Automation Equipment
What are the key specifications of ATSAME54P20A-AU that engineers should know?
The ATSAME54P20A-AU is a 32-bit ARM Cortex-M4F microcontroller operating up to 120 MHz with 1 MB of Flash and up to 256 KB of ECC-protected SRAM. According to the Microchip product page, the SAM E54 family also includes a 10/100 Ethernet MAC and two CAN-FD controllers. The device uses a 128-pin TQFP package measuring 14 mm by 14 mm and is identified as a 3.3 V part.
Where can I download the ATSAME54P20A datasheet PDF?
The ATSAME54P20A datasheet PDF is available through the official Microchip product page at https://www.microchip.com/en-us/product/ATSAME54P20A. The manufacturer page links the SAM D5x/E5x family documentation, device information, and package details. Use the exact ATSAME54P20A device documentation for the 128-pin TQFP pinout, electrical characteristics, memory map, and peripheral multiplexing.
What is the processor and maximum clock speed of ATSAME54P20A-AU?
The ATSAME54P20A-AU uses a 32-bit ARM Cortex-M4F processor with a hardware floating-point unit and a maximum operating frequency of 120 MHz. According to Microchip's ATSAME54P20A product page, this core combines high-frequency control processing with the event-driven characteristics required by industrial embedded products. The floating-point unit accelerates suitable arithmetic without requiring an external processor.
How much Flash and SRAM does ATSAME54P20A-AU provide?
The ATSAME54P20A-AU provides 1 MB of dual-panel Flash with ECC and supports up to 256 KB of SRAM with ECC across the SAM E54 family. The distributor specification identifies the Flash organization as 1M x 8 bits. ECC is a significant integrity feature for industrial, networking, and control systems where silent memory corruption would be more serious than a detected fault.
Which communication interfaces are available in ATSAME54P20A-AU?
The ATSAME54P20A-AU family supports a 10/100 Ethernet MAC and two CAN-FD controllers. According to the Microchip ATSAME54P20A product description, these interfaces expand the device beyond general-purpose GPIO control. Ethernet supports network-connected equipment, while the two CAN-FD channels support industrial fieldbus and vehicle-style network nodes with higher-throughput payload capability than classic CAN.
What package and mounting details apply to ATSAME54P20A-AU?
The ATSAME54P20A-AU is packaged in a 128-pin TQFP measuring 14 mm by 14 mm for surface mounting. The DigiKey listing identifies the exact MPN as a 1 MB, 120 MHz Cortex-M4F device in a 128-TQFP package, while Microchip lists the base ATSAME54P20A device. Use the manufacturer's 128-pin package drawing for land pattern, pin numbering, and exposed-pad information.
Is ATSAME54P20A-AU suitable for industrial motor control?
Yes, the ATSAME54P20A-AU is suitable for industrial motor-control and automation designs that need 120 MHz Cortex-M4F processing, ECC-protected memory, Ethernet, and dual CAN-FD connectivity. Microchip publishes a dedicated 100-pin motor-control plug-in module information sheet for the ATSAME54 family. Final motor-control suitability still depends on the required PWM channels, timers, analog inputs, and safety architecture.
ATSAME54P20A-AU vs ATSAME54P20A-AU-EFP: which one should I choose?
ATSAME54P20A-AU and ATSAME54P20A-AU-EFP are identified as 1 MB, 128-TQFP, tray-package members of the same device family, but the ordering suffixes may represent different operating or qualification options. According to the Mouser listing, the -EFP variant includes extended Flash performance. Confirm the full ordering table in the manufacturer documentation before approving a replacement because ordering-code suffixes can change temperature or qualification requirements.
Can ATSAME54P20A-AFT replace ATSAME54P20A-AU without a PCB change?
ATSAME54P20A-AFT is the closest documented same-package replacement candidate for the ATSAME54P20A-AU because it is described as a 128-pin PQFP/TQFP Cortex-M4F microcontroller with the same 1 MB Flash class. Pin compatibility still depends on matching the exact package dimensions and ordering-code meaning. Review the manufacturer pinout and device configuration tables before production use.
When should I choose ATSAME54P20A-AU instead of another Cortex-M4F MCU?
Choose the ATSAME54P20A-AU when the design benefits from the combination of a 120 MHz Cortex-M4F core, 1 MB ECC-capable Flash, up to 256 KB ECC-capable SRAM, Ethernet MAC, and two CAN-FD controllers. The 128-TQFP package also provides a large pin count for motor-control, communication, and mixed-signal peripherals. Select a different MCU when the board needs a smaller package, different supply range, or a peripheral mix outside the SAM E54 family.
What is the best drop-in replacement for ATSAME54P20A-AU?
ATSAME54P20A-AU-EFP is the best supported replacement candidate in the available family documentation because it retains the 128-TQFP package, 1 MB Flash configuration, Cortex-M4F architecture, 120 MHz class, Ethernet, and CAN-FD feature set. ATSAME54P20A-AFT is another same-package candidate, but its suffix and operating requirements must be checked. A software-level device migration is still required even when the PCB footprint matches.
What is the best STMicroelectronics equivalent for ATSAME54P20A-AU?
No verified STMicroelectronics part can be designated a drop-in equivalent for the ATSAME54P20A-AU from the available technical records. STM32F4 devices offer a related 32-bit Cortex-M4F architecture, but exact pin, peripheral, memory, package, and software compatibility would need individual verification. For a board-level substitution without footprint or firmware redesign, prioritize a documented Microchip ATSAME54 ordering code.
Where can I buy ATSAME54P20A-AU online?
Use the Request a Quote form on this page to request ATSAME54P20A-AU availability, current commercial terms, and lead time. The exact MPN is listed as an active 128-TQFP microcontroller with 1 MB Flash and a 120 MHz Cortex-M4F core. The quote form avoids publishing a stale price or an unverified stock claim and allows the request to be matched to the exact ordering code and tray packaging.
What is the price of ATSAME54P20A-AU?
Request the current ATSAME54P20A-AU price through the Request a Quote form on this page. The component is a standard catalog microcontroller with a public manufacturer product page, but current commercial terms can vary with quantity, packaging, and market conditions. The quote request should state the required quantity and confirm the ATSAME54P20A-AU ordering code to prevent substitution of a different suffix.
What is the lead time for ATSAME54P20A-AU?
Request the current lead time through the Request a Quote form on this page. The ATSAME54P20A-AU is a 3.3 V, 1 MB Flash, 128-TQFP SAM E54 microcontroller, and a production schedule should be confirmed for the exact ordering code and required quantity. Including the target delivery date in the request helps the commercial team evaluate whether an alternative same-package device is operationally acceptable.

Data referensi engineering untuk ATSAME54P20A-AU — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the ATSAME54P20A-AU for a 3.3 V embedded design that requires a 120 MHz Cortex-M4F core, 1 MB of Flash, up to 256 KB of ECC-protected SRAM, a 10/100 Ethernet MAC, two CAN-FD controllers, and a 128-pin TQFP footprint. It is especially attractive for industrial automation, connected motor control, factory gateways, and building equipment. Consider ATSAME54P20A-AU-EFP when the product requirement calls for the extended Flash performance identified in its ordering description; confirm its temperature and qualification details before release. Consider ATSAME54P20A-AFT only after verifying the 100 MHz limit, operating-grade suffix, and device configuration against the design requirements. No verified cross-brand MCU has the same documented footprint and feature set, so pin-compatible migration within the ATSAME54 family is the lower-risk path even when software adaptation is required.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini ATSAME54P20A-AU-EFP ATSAME54P20A-AFT
Package 128-TQFP (14x14 mm) 128-TQFP (14x14 mm) 128-pin PQFP/TQFP
Brand Microchip Technology Microchip Technology Microchip Technology
Processor Core 32-bit ARM Cortex-M4F 32-bit ARM Cortex-M4F 32-bit ARM Cortex-M4F
Maximum CPU Frequency 120 MHz 120 MHz 100 MHz
Flash Memory 1 MB 1 MB 1 MB

Diferensiator Kunci

  • Higher documented operating frequency (vsATSAME54P20A-AFT)
  • Extended Flash performance option (vsATSAME54P20A-AU)
  • Integrated industrial communications (vsATSAME54P20A-AFT)

Catatan Desain

Place the device’s required bypass capacitors directly beside their associated supply and ground pins, using the values and placement specified in the manufacturer package documentation. Separate analog and digital supply paths where the application permits, and avoid routing high-current outputs through sensitive input return paths. Validate the power budget across 120 MHz operation and the highest expected peripheral load because processor frequency, Ethernet activity, and CAN-FD transceivers can change current demand over time.

Follow the manufacturer’s 128-TQFP land pattern and pin-numbering diagram exactly, and confirm the package body dimensions are 14 mm by 14 mm. Keep clock, debug, and communication routes away from noisy power-stage routes. Ethernet differential pairs should be routed as a controlled impedance pair with continuous reference planes and minimal stubs. Because the MCU has 128 pins, a careful floorplan is essential to separate communications, motor-control outputs, analog inputs, and ground returns.

Do not treat ATSAME54P20A, ATSAME54P20A-AU, ATSAME54P20A-AFT, and ATSAME54P20A-AU-EFP as interchangeable solely because they share a family name. Review the ordering-information table for temperature grade, package, Flash-performance suffix, and qualification requirements. A hardware footprint match also does not guarantee firmware compatibility; regenerate the startup configuration, linker script, pin definitions, and peripheral initialization for the selected ordering code.

The 120 MHz Cortex-M4F core and active Ethernet or CAN-FD peripherals can raise device temperature beyond the simple idle condition. Use the manufacturer’s maximum-frequency and active-current guidance when estimating junction temperature, and provide copper area around the TQFP without violating isolation or signal-clearance requirements. Validate with chamber-temperature operation, maximum peripheral activity, and worst-case supply voltage rather than relying only on an ambient-temperature calculation.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The available manufacturer and distributor records do not explicitly state the requested compliance classifications. The -85C operating-temperature notation appears in a same-package family listing and should be verified against the Microchip ordering table for the exact suffix.

Pencarian Terkait

atsame54p20a au-efp atsame54p20a datasheet atsame54p20a aut atsame54p20a dev board atmel atsame54p20a ATSAME54P20A-AU datasheet pdf ATSAME54P20A-AU pinout ATSAME54P20A-AU equivalent ATSAME54P20A-AU replacement ATSAME54P20A-AU vs ATSAME54P20A-AFT ATSAME54P20A-AU footprint ATSAME54P20A-AU application circuit ATSAME54P20A price ATSAME54P20A stock Microchip ATSAME54P20A-AU

Komponen dan Istilah Terkait

Microchip Technology ATSAME54P20A-AU ATSAME54P20A ATSAME54P20A-AU-EFP ATSAME54P20A-AFT SAM E54 ARM Cortex-M4F ARMv7-M microcontroller embedded processor semiconductor 128-TQFP TQFP package family surface mount 1 MB dual-panel Flash 256 KB SRAM ECC 10/100 Ethernet MAC CAN-FD floating-point unit 120 MHz industrial motor control industrial Ethernet gateway factory automation connected sensor hub
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ