ATXMEGA16C4-MN - 16KB 8/16-Bit AVR MCU | Microchip Technology
MPN: ATXMEGA16C4-MN ✗ Akhir HidupATXMEGA16C4-MN Ringkasan
An 8/16-bit AVR microcontroller is a compact embedded-control semiconductor that combines a processor core, programmable nonvolatile memory, data memory, peripherals, and I/O in one package. The AVR architecture belongs to the broader hierarchy of 8-bit RISC microcontrollers, embedded processors, and system-on-chip devices. XMEGA devices extend that foundation with an event system, multilevel interrupt controller, multiple communication peripherals, and hardware designed for deterministic low-power control.
The ATXMEGA16C4-MN provides four USART modules, two two-wire serial interfaces, and multiple 16-bit timer/counter channels with compare and PWM functions. Its four-channel event system can connect peripherals directly, reducing reliance on CPU interrupt handling for time-critical tasks. The 34 GPIO lines make the device suitable for control boards, communication hubs, measurement equipment, and embedded industrial products requiring a balance of processing, connectivity, and peripheral integration.
The ATxmega16C4 family uses 16 KB of programmable Flash, including a dedicated 4 KB boot-code area, together with 1 KB EEPROM and 2 KB SRAM. Read-while-write Flash operation can support firmware-update workflows, while the boot-code section provides a controlled location for startup and recovery logic. The exact operating voltage range, clock configuration, flash endurance, and electrical limits should be confirmed in the manufacturer device datasheet before a production design is released.
Typical applications include industrial control panels, serial-interface converters, compact sensor nodes, data-acquisition peripherals, communication equipment, and low-power embedded controllers. The combination of three USARTs, two TWIs, 34 GPIO lines, PWM-capable timers, and a hardware event system is especially useful when several independent serial or timing functions must coexist without excessive microcontroller loading.
PCB implementation should account for the exposed thermal pad beneath the 44-pin VFQFN, provide the manufacturer-recommended power and decoupling arrangement, and preserve access to programming and debug signals. Because this device combines extensive I/O with mixed analog and digital functions, careful partitioning of high-speed communications, sensitive measurement circuitry, and switching power stages can improve system reliability.
This page consolidates the manufacturer's product-page specifications, the ATxmega16C4 device-datasheet feature description, package information, sourcing references, and practical selection guidance. It also distinguishes documented capabilities from parameters that must be checked in the complete manufacturer datasheet, helping engineers evaluate the ATXMEGA16C4-MN before committing to a PCB or production firmware.
Alternatif penggantian untuk ATXMEGA16C4-MN — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian ATXMEGA16C4-MN (sama faktor bentuk dan footprint) — berbeda di dalam Package.
ATXMEGA16C4-MH
✅ Drop-InKontak untuk harga
Lihat Datasheet →ATXMEGA16C4-MN Rating Maksimal & Karakteristik Listrik
| Device Type | 8/16-bit RISC microcontroller |
| Architecture | AVR XMEGA |
| Program Memory | 16 KB Flash |
| Boot Code Section | 4 KB |
| Flash Feature | In-system programmable with read-while-write capability |
| EEPROM Memory | 1 KB |
| SRAM | 2 KB |
| General-Purpose I/O | 34 lines |
| Event System | 4 channels |
| Real-Time Counter | 16-bit |
| Timer/Counter Modules | 4, 16-bit |
| USART Modules | 3 |
| Two-Wire Serial Interfaces | 2 |
| Paket | 44-pin VFQFN with exposed pad |
| Tipe Mounting | Surface mount |
| Supply Voltage Options | 1.8 V, 2.5 V, or 3.3 V |
ATXMEGA16C4-MN 44-pin vfqfn with exposed pad Diamant Konfigurasi Panduan
Konfigurasi pin untuk ATXMEGA16C4-MN (44-pin vfqfn with exposed pad pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk ATXMEGA16C4-MN.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
ATXMEGA16C4-MN cocok untuk 6 aplikasis: Industrial Serial Gateway, Compact Sensor Node, Data Acquisition Controller, Motor and PWM Control, Programmable Control Panel, Bootloader and Field Update Hub.
Industrial Serial Gateway
The ATXMEGA16C4-MN fits an industrial serial gateway because three USARTs and two TWIs allow several local devices to share a controller without dedicating an external interface IC to every connection. Its 16 KB Flash supports a compact protocol stack, while the four-channel event system can coordinate receive, transmit, timer, and status events without moving every task into interrupt software. The 34 GPIO lines provide ready connections for mode indicators, fault signals, control outputs, and service inputs. In a controller operating from 3.3 V, the device offers useful integration without an external transceiver for low-speed logic-level links. Industrial deployment still requires transceiver protection, isolation where required, environmental qualification, and confirmation of the exact operating-temperature grade in the manufacturer datasheet.
Direkomendasikan
Compact Sensor Node
The ATXMEGA16C4-MN is suitable for a compact sensor node that combines environmental sensing with local filtering and short-range communication. Two TWIs can connect compatible sensors and configuration devices, while a USART can provide a host or service interface. The 34 GPIO lines allow multiple digital inputs, alarm outputs, and status indicators, and the event system can connect timer and communication events for more deterministic operation. Its 16 KB Flash, 1 KB EEPROM, and 2 KB SRAM are appropriate for a focused firmware image rather than a large application framework. Designers should budget memory for drivers, calibration, protocol handling, and a bootloader, and should confirm whether the 1 KB EEPROM is sufficient for configuration and calibration data before finalizing the node architecture.
Direkomendasikan
Data Acquisition Controller
The ATXMEGA16C4-MN can serve as a data-acquisition controller when a system needs several serial instruments, sensors, or service ports coordinated by one low-power MCU. Four 16-bit timer/counters provide timing resources for sampling intervals, pulse measurements, and PWM outputs, while the hardware event system helps link peripheral actions without excessive CPU polling. The three USARTs make it practical to connect legacy measurement equipment or distribute acquisition traffic across isolated interface channels. Its 2 KB SRAM supports short processing buffers, so applications needing larger sample storage should add external memory or select a higher-memory MCU. Analog front-end design remains separate from the digital controller and should include appropriate input protection, reference accuracy, channel isolation, and signal conditioning before the ATXMEGA16C4-MN captures the results.
Direkomendasikan
Motor and PWM Control
The ATXMEGA16C4-MN supports small motor and PWM-control subsystems where four 16-bit timer/counter modules are more valuable than a large general-purpose processor. Timer channels can generate compare and PWM outputs, and the four-channel event system can synchronize timing relationships across multiple peripherals. The 34 GPIO lines leave ample capacity for encoders, direction controls, fault inputs, and status signals. This makes the device relevant to compact actuators, positioning mechanisms, and equipment with several independently controlled outputs. The microcontroller does not directly replace power MOSFETs or motor drivers, so external stage design remains essential. Validate low-speed and startup behavior, current limits, thermal conditions, and protection thresholds in the final power stage, while using the device-datasheet timer diagrams to confirm the required output frequency and duty-cycle resolution.
Direkomendasikan
Programmable Control Panel
A programmable control panel can use the ATXMEGA16C4-MN to consolidate button inputs, indicator control, communications, and timing functions. The 34 GPIO lines are well suited to reading switches and driving discrete outputs, while three USARTs can connect a local display, configuration interface, and service port. Four 16-bit timers provide debouncing, periodic maintenance, flashing, and PWM behavior without relying entirely on a software scheduler. Two TWIs add another option for expandable modules or compatible display and sensor components. The device should be placed so grounded or noisy external switching stages do not inject disturbances into sensitive signal routes, and its 44-pin VFQFN exposed pad should be connected according to the manufacturer package instructions. Firmware should also include input filtering and safe output defaults for predictable behavior during startup and firmware updates.
Direkomendasikan
Bootloader and Field Update Hub
The ATXMEGA16C4-MN is appropriate for a small field-update hub because its 16 KB Flash includes a dedicated 4 KB boot-code section and supports read-while-write operation. The bootloader can verify an update, switch Flash execution regions, and recover through a controlled fallback path while application tasks continue from another region. Three USARTs and two TWIs provide practical paths for receiving update images or forwarding diagnostics to multiple external devices. A production implementation still needs a robust image-authentication strategy, power-fail-safe write procedure, version control, and recovery testing across voltage interruptions. The 1 KB EEPROM is limited for large update metadata, so only essential records such as the active version and image state should be stored there unless external nonvolatile storage is added.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk ATXMEGA16C4-MN — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | ATXMEGA16C4-MH |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 44-pin VFQFN with exposed pad | 44-pin VFQFN with exposed pad |
| Core Architecture | 8/16-bit AVR XMEGA RISC | 8/16-bit AVR XMEGA RISC |
| Flash Memory | 16 KB | 16 KB |
| EEPROM Memory | 1 KB | 1 KB |
| SRAM | 2 KB | 2 KB |
| General-Purpose I/O | 34 lines | 34 lines |
| USART Modules | 3 | 3 |
| Two-Wire Serial Interfaces | 2 | 2 |
| Timer/Counter Modules | 4, 16-bit | 4, 16-bit |
| Event System | 4 channels | 4 channels |
Diferensiator Kunci
- High serial-interface density for the available Flash capacity (vsATXMEGA16C4-CUR)
- Hardware event routing reduces interrupt-dependent timing work (vsATXMEGA16C4-MH)
- Read-while-write and reserved boot area support controlled firmware updates (vsATXMEGA16C4-CU)
Catatan Desain
Design the 44-pin VFQFN land pattern directly from the manufacturer package drawing and pin table rather than from a generic 44-QFN footprint. Include the exposed-pad land, its via arrangement, and the manufacturer's recommended solder-mask and paste geometry. Place input and decoupling capacitors adjacent to their assigned power pins, and keep clock, programming, reset, and communication routes away from switching-node copper where practical.
Separate high-current switching paths and communication routing from sensitive measurement or reference circuitry. The XMEGA event system and timer inputs can provide precise timing, but their usefulness depends on clean electrical connections and a stable reference. Reserve test points for programming, reset, supply rails, and major serial interfaces so production diagnostics do not require redesigning the board.
Do not treat every ATXMEGA16C4 order code as a physical drop-in alternative. The MN version is a 44-pin VFQFN, whereas the available CUR comparison is a 49-pin BGA. Also verify the 16 KB Flash and 2 KB SRAM budget before committing to a library-heavy firmware architecture. The dedicated 4 KB boot-code section is useful for recovery, but it should be reserved explicitly in the linker or memory map.
Confirm the exact supply-voltage range, clock limits, and peripheral current consumption in the complete device datasheet for the selected ordering option. Provide local bulk and high-frequency decoupling according to the manufacturer layout guidance, and keep the exposed-pad thermal path unobstructed. If the board supplies the MCU from a switching regulator, isolate high-current paths and assess whether filtering is required for the USART or TWI interfaces.
Informasi Konformitas
Compliance status was not stated in the product-page and search results. Confirm the current material declaration and qualification information from Microchip Technology for the exact order code. Automotive suitability should not be inferred from the MPN suffix.