Microchip Technology

ATXMEGA16C4-MN - 16KB 8/16-Bit AVR MCU | Microchip Technology

料号: ATXMEGA16C4-MN ✗ 停产
1.8 V, 2.5 V, or 3.3 V Vdss 44-pin VFQFN with exposed pad Package 16 KB Flash Memory
最小起订量: 1 |

ATXMEGA16C4-MN 概述

The Microchip Technology ATXMEGA16C4-MN is a low-power 8/16-bit AVR XMEGA microcontroller with 16 KB of in-system programmable Flash memory, 1 KB of EEPROM, and 2 KB of SRAM in a 44-pin VFQFN package with an exposed pad. It supports read-while-write operation and includes a 4 KB boot-code section, 34 general-purpose I/O lines, a 16-bit real-time counter, and four 16-bit timer/counter modules.

An 8/16-bit AVR microcontroller is a compact embedded-control semiconductor that combines a processor core, programmable nonvolatile memory, data memory, peripherals, and I/O in one package. The AVR architecture belongs to the broader hierarchy of 8-bit RISC microcontrollers, embedded processors, and system-on-chip devices. XMEGA devices extend that foundation with an event system, multilevel interrupt controller, multiple communication peripherals, and hardware designed for deterministic low-power control.

The ATXMEGA16C4-MN provides four USART modules, two two-wire serial interfaces, and multiple 16-bit timer/counter channels with compare and PWM functions. Its four-channel event system can connect peripherals directly, reducing reliance on CPU interrupt handling for time-critical tasks. The 34 GPIO lines make the device suitable for control boards, communication hubs, measurement equipment, and embedded industrial products requiring a balance of processing, connectivity, and peripheral integration.

The ATxmega16C4 family uses 16 KB of programmable Flash, including a dedicated 4 KB boot-code area, together with 1 KB EEPROM and 2 KB SRAM. Read-while-write Flash operation can support firmware-update workflows, while the boot-code section provides a controlled location for startup and recovery logic. The exact operating voltage range, clock configuration, flash endurance, and electrical limits should be confirmed in the manufacturer device datasheet before a production design is released.

Typical applications include industrial control panels, serial-interface converters, compact sensor nodes, data-acquisition peripherals, communication equipment, and low-power embedded controllers. The combination of three USARTs, two TWIs, 34 GPIO lines, PWM-capable timers, and a hardware event system is especially useful when several independent serial or timing functions must coexist without excessive microcontroller loading.

PCB implementation should account for the exposed thermal pad beneath the 44-pin VFQFN, provide the manufacturer-recommended power and decoupling arrangement, and preserve access to programming and debug signals. Because this device combines extensive I/O with mixed analog and digital functions, careful partitioning of high-speed communications, sensitive measurement circuitry, and switching power stages can improve system reliability.

This page consolidates the manufacturer's product-page specifications, the ATxmega16C4 device-datasheet feature description, package information, sourcing references, and practical selection guidance. It also distinguishes documented capabilities from parameters that must be checked in the complete manufacturer datasheet, helping engineers evaluate the ATXMEGA16C4-MN before committing to a PCB or production firmware.

直接替换替代料: ATXMEGA16C4-MN ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: ATXMEGA16C4-MN (相同外形与封装尺寸) ——差异在于 Package.

Microchip Technology
Package: 44-VQFN (7 x 7 mm)
对比 ATXMEGA16C4-MN →

ATXMEGA16C4-MH

✅ 直接替换
Microchip Technology
📦 44-pin VFQFN with exposed pad
8/16-bit AVR XMEGA microcontroller · 32 MHz · 16 KB · 8K x 16 · 4 KB · 1 KB · 2 KB · 1.6 V to 3.6 V

联系询价

查看数据手册 →

ATXMEGA16C4-MN 最大额定值与电气特性

Device Type 8/16-bit RISC microcontroller
Architecture AVR XMEGA
Program Memory 16 KB Flash
Boot Code Section 4 KB
Flash Feature In-system programmable with read-while-write capability
EEPROM Memory 1 KB
SRAM 2 KB
General-Purpose I/O 34 lines
Event System 4 channels
Real-Time Counter 16-bit
Timer/Counter Modules 4, 16-bit
USART Modules 3
Two-Wire Serial Interfaces 2
封装 44-pin VFQFN with exposed pad
安装类型 Surface mount
Supply Voltage Options 1.8 V, 2.5 V, or 3.3 V

ATXMEGA16C4-MN 44-pin vfqfn with exposed pad 引脚配置指南

ATXMEGA16C4-MN(44-pin vfqfn with exposed pad 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

ATXMEGA16C4-MN 的 44-pin vfqfn with exposed pad 封装引脚图

暂无详细引脚数据: ATXMEGA16C4-MN.

请参阅 数据手册 以查看完整引脚配置。

典型应用

ATXMEGA16C4-MN 适用于 6 应用s: Industrial Serial Gateway, Compact Sensor Node, Data Acquisition Controller, Motor and PWM Control, Programmable Control Panel, Bootloader and Field Update Hub.

🏭

Industrial Serial Gateway

The ATXMEGA16C4-MN fits an industrial serial gateway because three USARTs and two TWIs allow several local devices to share a controller without dedicating an external interface IC to every connection. Its 16 KB Flash supports a compact protocol stack, while the four-channel event system can coordinate receive, transmit, timer, and status events without moving every task into interrupt software. The 34 GPIO lines provide ready connections for mode indicators, fault signals, control outputs, and service inputs. In a controller operating from 3.3 V, the device offers useful integration without an external transceiver for low-speed logic-level links. Industrial deployment still requires transceiver protection, isolation where required, environmental qualification, and confirmation of the exact operating-temperature grade in the manufacturer datasheet.

🧩

Compact Sensor Node

The ATXMEGA16C4-MN is suitable for a compact sensor node that combines environmental sensing with local filtering and short-range communication. Two TWIs can connect compatible sensors and configuration devices, while a USART can provide a host or service interface. The 34 GPIO lines allow multiple digital inputs, alarm outputs, and status indicators, and the event system can connect timer and communication events for more deterministic operation. Its 16 KB Flash, 1 KB EEPROM, and 2 KB SRAM are appropriate for a focused firmware image rather than a large application framework. Designers should budget memory for drivers, calibration, protocol handling, and a bootloader, and should confirm whether the 1 KB EEPROM is sufficient for configuration and calibration data before finalizing the node architecture.

📟

Data Acquisition Controller

The ATXMEGA16C4-MN can serve as a data-acquisition controller when a system needs several serial instruments, sensors, or service ports coordinated by one low-power MCU. Four 16-bit timer/counters provide timing resources for sampling intervals, pulse measurements, and PWM outputs, while the hardware event system helps link peripheral actions without excessive CPU polling. The three USARTs make it practical to connect legacy measurement equipment or distribute acquisition traffic across isolated interface channels. Its 2 KB SRAM supports short processing buffers, so applications needing larger sample storage should add external memory or select a higher-memory MCU. Analog front-end design remains separate from the digital controller and should include appropriate input protection, reference accuracy, channel isolation, and signal conditioning before the ATXMEGA16C4-MN captures the results.

⚡

Motor and PWM Control

The ATXMEGA16C4-MN supports small motor and PWM-control subsystems where four 16-bit timer/counter modules are more valuable than a large general-purpose processor. Timer channels can generate compare and PWM outputs, and the four-channel event system can synchronize timing relationships across multiple peripherals. The 34 GPIO lines leave ample capacity for encoders, direction controls, fault inputs, and status signals. This makes the device relevant to compact actuators, positioning mechanisms, and equipment with several independently controlled outputs. The microcontroller does not directly replace power MOSFETs or motor drivers, so external stage design remains essential. Validate low-speed and startup behavior, current limits, thermal conditions, and protection thresholds in the final power stage, while using the device-datasheet timer diagrams to confirm the required output frequency and duty-cycle resolution.

🔧

Programmable Control Panel

A programmable control panel can use the ATXMEGA16C4-MN to consolidate button inputs, indicator control, communications, and timing functions. The 34 GPIO lines are well suited to reading switches and driving discrete outputs, while three USARTs can connect a local display, configuration interface, and service port. Four 16-bit timers provide debouncing, periodic maintenance, flashing, and PWM behavior without relying entirely on a software scheduler. Two TWIs add another option for expandable modules or compatible display and sensor components. The device should be placed so grounded or noisy external switching stages do not inject disturbances into sensitive signal routes, and its 44-pin VFQFN exposed pad should be connected according to the manufacturer package instructions. Firmware should also include input filtering and safe output defaults for predictable behavior during startup and firmware updates.

💾

Bootloader and Field Update Hub

The ATXMEGA16C4-MN is appropriate for a small field-update hub because its 16 KB Flash includes a dedicated 4 KB boot-code section and supports read-while-write operation. The bootloader can verify an update, switch Flash execution regions, and recover through a controlled fallback path while application tasks continue from another region. Three USARTs and two TWIs provide practical paths for receiving update images or forwarding diagnostics to multiple external devices. A production implementation still needs a robust image-authentication strategy, power-fail-safe write procedure, version control, and recovery testing across voltage interruptions. The 1 KB EEPROM is limited for large update metadata, so only essential records such as the active version and image state should be stored there unless external nonvolatile storage is added.

What is the ATXMEGA16C4-MN?
The ATXMEGA16C4-MN is a Microchip Technology 8/16-bit AVR XMEGA RISC microcontroller with 16 KB of programmable Flash, 1 KB of EEPROM, and 2 KB of SRAM in a 44-pin VFQFN package. According to the ATxmega16C4 device datasheet, it also provides 34 GPIO lines, three USARTs, two TWIs, four 16-bit timer/counters, and a four-channel event system for connected embedded-control designs.
How much memory does the ATXMEGA16C4-MN have?
The ATXMEGA16C4-MN contains 16 KB of in-system programmable Flash, including a 4 KB boot-code section, plus 1 KB of EEPROM and 2 KB of SRAM. According to the manufacturer product page and device datasheet, the Flash supports read-while-write operation, which can help firmware continue operating from one code section while another section is being updated.
Which package does the ATXMEGA16C4-MN use?
The ATXMEGA16C4-MN uses a 44-pin VFQFN surface-mount package with an exposed pad. Distributor and datasheet listings identify the package as 44-VFQFN with exposed pad. The exposed pad normally requires a land pattern and thermal or electrical implementation that follows the manufacturer's package drawing; use the pin-description and package dimensions in the complete device datasheet during PCB layout.
Where can I download the ATXMEGA16C4-MN datasheet PDF?
The ATXMEGA16C4-MN datasheet PDF is available at the linked ATxmega16C4 and ATxmega32C4 device-datasheet URL on this page. The document covers both related devices, while the ordering information identifies ATXMEGA16C4-MN as the 16 KB Flash variant in a 44-pin VFQFN package. Use the device-specific electrical characteristics and pin tables for the final schematic and layout.
Where can I find the ATXMEGA16C4-MN pinout?
The ATXMEGA16C4-MN pinout is defined in the pin-description and package-drawing sections of the ATxmega16C4 device datasheet. The device is a 44-pin VFQFN with an exposed pad, so a 44-position physical pin list is not sufficient without the exposed-pad designation. Use the manufacturer's pin table to map power, ground, I/O, communication, clock, programming, and exposed-pad connections before routing the board.
What are the key specifications of ATXMEGA16C4-MN that engineers should know?
The principal ATXMEGA16C4-MN specifications are 16 KB Flash, 1 KB EEPROM, 2 KB SRAM, 34 GPIO lines, three USARTs, two TWIs, four 16-bit timer/counters, and a four-channel event system. It is packaged as a 44-pin VFQFN with an exposed pad and operates from the listed 1.8 V, 2.5 V, or 3.3 V supply choices. Maximum clock and temperature limits require confirmation in the complete manufacturer datasheet.
What communication interfaces does the ATXMEGA16C4-MN provide?
The ATXMEGA16C4-MN provides three USART modules and two two-wire serial interfaces, or TWIs. According to the manufacturer device-datasheet description, the TWIs support the I2C-compatible two-wire protocol, while the USARTs handle asynchronous serial communication. This interface mix makes the device appropriate for multi-port gateways, sensor networks, and equipment that must bridge several embedded serial links.
Why use the XMEGA event system in an ATXMEGA16C4-MN design?
The four-channel event system lets ATXMEGA16C4-MN peripherals communicate through hardware event routing rather than relying exclusively on CPU interrupt handling. The manufacturer device datasheet identifies the event system as a defining C4-family feature. It is useful for deterministic timing, capture, compare, and PWM coordination, reducing processor workload when several timer or communication events must be linked with predictable latency.
Is the ATXMEGA16C4-MN suitable for industrial control systems?
The ATXMEGA16C4-MN is suitable for many industrial control tasks because it combines 34 GPIO lines, three USARTs, two TWIs, four 16-bit timer/counters, and hardware event routing in one low-power package. Its suitability for a specific installation still depends on operating-temperature limits, supply tolerance, communication isolation, environmental qualification, and safety requirements that must be checked for the ordered grade.
Can the ATXMEGA16C4-MN replace an ATXMEGA16C4 with another package?
The ATXMEGA16C4-MN should only be treated as a direct drop-in replacement when the candidate has the same 44-pin VFQFN footprint, compatible exposed-pad implementation, equivalent pin functions, and matching electrical and timing requirements. A variant with a different package can offer similar core functionality but normally requires a PCB redesign. Confirm the complete ordering code and pin table rather than relying only on the ATXMEGA16C4 base MPN.
What is the best drop-in replacement for ATXMEGA16C4-MN?
The closest drop-in replacement must use the same 44-pin VFQFN footprint and preserve the power, I/O, clock, programming, and communication pin assignments. The ATXMEGA16C4-MH appears in the available cross-reference results as a related same-device ordering option, but its exact package, temperature grade, and order-code details should be confirmed before substitution. No cross-brand drop-in equivalent was established from the available cross-reference results.
When should I choose the ATXMEGA16C4-MN over a larger XMEGA MCU?
Choose the ATXMEGA16C4-MN when a design fits comfortably within 16 KB of Flash, 1 KB of EEPROM, and 2 KB of SRAM while still requiring three USARTs, two TWIs, and substantial timer and GPIO resources. Move to a larger XMEGA device when firmware growth, buffered data, application complexity, or additional peripheral requirements would force tight memory utilization or repeated code restructuring.
What can replace the ATXMEGA16C4-MN?
The ATXMEGA16C4-MN can be replaced without PCB changes only by a candidate with the same 44-pin VFQFN footprint and compatible pin, electrical, clock, and peripheral assignments. ATXMEGA16C4-MH is the closest related candidate shown in the cross-reference results, while ATXMEGA16C4-AN and ATXMEGA16C4-CUR use ordering options whose package details must be checked before considering them. Cross-brand AVR-compatible alternatives were not established.
Is ATXMEGA16C4-MN the same as ATXMEGA16C4-CUR?
No direct equivalence should be assumed between ATXMEGA16C4-MN and ATXMEGA16C4-CUR. The comparison listing identifies ATXMEGA16C4-CUR as a 49-pin BGA configuration, whereas ATXMEGA16C4-MN is a 44-pin VFQFN configuration. Even if both devices share the same 16 KB Flash core, different packages and land patterns make CUR a redesign-level choice rather than a drop-in replacement for MN.
Where can I buy ATXMEGA16C4-MN online?
Use the Request a Quote form on this page to request ATXMEGA16C4-MN availability, commercial terms, and current lead time. The part is listed for ordering by multiple distribution channels, but inventory and quote timing can change. Provide the exact ATXMEGA16C4-MN order code, target quantity, and required delivery date so procurement can confirm the correct 44-pin VFQFN configuration.
What is the price of ATXMEGA16C4-MN?
Current ATXMEGA16C4-MN pricing should be obtained through the Request a Quote form on this page because commercial terms depend on quantity, date, and supply conditions. The available product listings identify distributors and stock references but do not provide a qualifying quantity-break table with explicit prices. The form allows buyers to request a current quote without relying on stale marketplace figures.
What is the lead time and stock status for ATXMEGA16C4-MN?
Request current stock and lead-time confirmation through the Request a Quote form on this page. One listing references 2,320 pieces in stock with a delivery estimate to be confirmed, but inventory at a listing channel does not establish the exact quantity currently available through XAIPART. Include your required quantity and schedule when requesting the quote so the order code and delivery window can be validated.

工程参考数据: ATXMEGA16C4-MN ——对比、设计指导和合规信息。

选型指南

Choose the ATXMEGA16C4-MN for compact embedded-control products that need three USARTs, two TWIs, four 16-bit timer/counters, 34 GPIO lines, and hardware event routing within a 16 KB Flash and 2 KB SRAM budget. Its 44-pin VFQFN package is appropriate for space-constrained boards, but the exposed pad and dense pinout require careful layout. Select ATXMEGA16C4-MH only after confirming its exact package, grade, and order-code compatibility; it appears to be the closest related same-family option in the cross-reference results. ATXMEGA16C4-CUR and ATXMEGA16C4-CU are not drop-in choices because their package configurations differ. Consider a larger XMEGA device when firmware, buffered data, protocol complexity, or update storage will exceed the MN device's memory limits. No cross-brand drop-in alternative was established from the available evidence, so changing MCU architecture should be treated as a redesign rather than a substitution.

与替代料对比

参数 本产品 ATXMEGA16C4-MH
Brand Microchip Technology Microchip Technology
Package 44-pin VFQFN with exposed pad 44-pin VFQFN with exposed pad
Core Architecture 8/16-bit AVR XMEGA RISC 8/16-bit AVR XMEGA RISC
Flash Memory 16 KB 16 KB
EEPROM Memory 1 KB 1 KB
SRAM 2 KB 2 KB
General-Purpose I/O 34 lines 34 lines
USART Modules 3 3
Two-Wire Serial Interfaces 2 2
Timer/Counter Modules 4, 16-bit 4, 16-bit
Event System 4 channels 4 channels

关键差异点

  • High serial-interface density for the available Flash capacity (对比 ATXMEGA16C4-CUR)
  • Hardware event routing reduces interrupt-dependent timing work (对比 ATXMEGA16C4-MH)
  • Read-while-write and reserved boot area support controlled firmware updates (对比 ATXMEGA16C4-CU)

设计说明

Design the 44-pin VFQFN land pattern directly from the manufacturer package drawing and pin table rather than from a generic 44-QFN footprint. Include the exposed-pad land, its via arrangement, and the manufacturer's recommended solder-mask and paste geometry. Place input and decoupling capacitors adjacent to their assigned power pins, and keep clock, programming, reset, and communication routes away from switching-node copper where practical.

Separate high-current switching paths and communication routing from sensitive measurement or reference circuitry. The XMEGA event system and timer inputs can provide precise timing, but their usefulness depends on clean electrical connections and a stable reference. Reserve test points for programming, reset, supply rails, and major serial interfaces so production diagnostics do not require redesigning the board.

Do not treat every ATXMEGA16C4 order code as a physical drop-in alternative. The MN version is a 44-pin VFQFN, whereas the available CUR comparison is a 49-pin BGA. Also verify the 16 KB Flash and 2 KB SRAM budget before committing to a library-heavy firmware architecture. The dedicated 4 KB boot-code section is useful for recovery, but it should be reserved explicitly in the linker or memory map.

Confirm the exact supply-voltage range, clock limits, and peripheral current consumption in the complete device datasheet for the selected ordering option. Provide local bulk and high-frequency decoupling according to the manufacturer layout guidance, and keep the exposed-pad thermal path unobstructed. If the board supplies the MCU from a switching regulator, isolate high-current paths and assess whether filtering is required for the USART or TWI interfaces.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

Compliance status was not stated in the product-page and search results. Confirm the current material declaration and qualification information from Microchip Technology for the exact order code. Automotive suitability should not be inferred from the MPN suffix.

数据核验日期: 2026-11-10 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

ATXMEGA16C4-MN datasheet ATXMEGA16C4-MN pinout ATXMEGA16C4-MN datasheet pdf Microchip ATXMEGA16C4-MN ATXMEGA16C4-MN 44 VFQFN ATXMEGA16C4-MN 16KB Flash ATXMEGA16C4-MN three USART ATXMEGA16C4-MN equivalent ATXMEGA16C4-MN replacement ATXMEGA16C4-MN cross reference ATXMEGA16C4-MN vs ATXMEGA16C4-MH ATXMEGA16C4-MN price ATXMEGA16C4-MN stock ATXMEGA16C4-MN application circuit ATXMEGA16C4-MN footprint

相关元器件 & 术语

Microchip Technology ATXMEGA16C4-MN ATXMEGA16C4 ATXMEGA16C4-MH ATXMEGA16C4-CUR ATXMEGA16C4-CU AVR XMEGA 8/16-bit RISC microcontroller 8-bit microcontroller embedded processor system-on-chip in-system programmable Flash read-while-write EEPROM SRAM four-channel event system USART two-wire serial interface TWI 16-bit timer/counter PWM 44-pin VFQFN QFN family surface mount embedded control
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情