ATXMEGA64A1-AUR 32MHz 64KB Flash MCU | Microchip | TQFP-100
MPN: ATXMEGA64A1-AUR ✗ Akhir HidupATXMEGA64A1-AUR Ringkasan
An 8/16-bit AVR microcontroller is a compact embedded-processing device whose architecture executes instructions using an 8-bit register-oriented model while supporting 16-bit operations through paired registers. The XMEGA A1 family extends the AVR architecture into the power-management IC ecosystem with a strong peripheral mix, multiple timer channels, event-system routing, direct-memory access, and a real-time counter. This makes the family useful when deterministic control and specialized hardware peripherals are required without a higher-complexity processor core.
Key device features include in-system-programmable Flash with read-while-write operation, 2 KB of internal EEPROM, 4 KB of SRAM, a four-channel DMA controller, an eight-channel event system, a programmable multilevel interrupt controller, and a 16-bit real-time counter. Eight flexible 16-bit timer/counter blocks provide timing, compare, and PWM functions, while the A1 family also includes an external bus interface and extensive general-purpose I/O.
The AVR instruction set combines compact 16-bit opcodes, multiply-and-multiply-accumulate support, and dedicated event-handling peripherals. Read-while-write Flash operation allows code execution to continue during suitable programming activity, while the DMA and event system reduce CPU intervention for data movement and time-critical signal routing. These characteristics distinguish the device from simpler 8-bit AVR microcontrollers that provide fewer autonomous peripherals.
Typical uses include industrial sensor acquisition, motor and actuator control, communications gateways, data loggers, and compact embedded control platforms. The multiple timers support motor PWM, waveform generation, and periodic servicing, while the external bus interface can connect the controller to additional digital devices. The 100-pin TQFP package also provides enough I/O and power connectivity for systems requiring several peripheral functions on one board.
When designing around the ATXMEGA64A1-AUR, use the manufacturer datasheet pin table for every signal and exposed-pad connection, and preserve the required decoupling and programming-interface layout. Confirm that the chosen peripheral mix matches the exact A1 device rather than assuming that all XMEGA family members share identical pin assignments. The manufacturer also identifies the A1 device as not recommended for new designs and directs new designs toward ATxmega64A1U.
This product analysis combines the exact device characteristics with practical peripheral-selection guidance, replacement considerations, and PCB-focused design notes. It helps engineers distinguish exact ordering-code variants, evaluate low-power migration options, and plan firmware, decoupling, timing, and mixed-signal layouts before committing a 100-pin design to production.
Alternatif penggantian untuk ATXMEGA64A1-AUR — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian ATXMEGA64A1-AUR (sama faktor bentuk dan footprint) — berbeda di dalam External Bus Interface, Package, CPU Architecture, General-Purpose I/O, Product Type.
ATXMEGA64A1U-AUR
✅ Drop-In📋 Alternatif referensi (tidak dalam katalog)
ATXMEGA64A1-AU
✅ Drop-InKontak untuk harga
Lihat Datasheet →ATXMEGA64A1U-AU
✅ Drop-InKontak untuk harga
Lihat Datasheet →ATXMEGA64A1-AUR Rating Maksimal & Karakteristik Listrik
| CPU Architecture | 8/16-bit AVR RISC |
| Frekuensi Bawah Maximum | 32 MHz |
| Program Memory Type | Self-programming Flash |
| Program Memory Size | 64 KB (32K x 16) |
| Boot Loader Section | 4 KB |
| SRAM Size | 4 KB |
| EEPROM Size | 2 KB |
| Supply Voltage Range | 1.6 V to 3.6 V |
| Core Supply Voltage | 2.7 V to 3.6 V |
| DMA Controller | 4 channels |
| Event System | 8 channels |
| Real-Time Counter | 16-bit |
| Timer/Counter Count | 8 flexible 16-bit timer/counters |
| General-Purpose I/O | 78 lines |
| Paket | 100-pin TQFP (14 x 14 mm) |
| Tipe Mounting | Surface mount |
| External Bus Interface | Present |
| Flash Read-While-Write | Supported |
ATXMEGA64A1-AUR 100-pin tqfp (14 x 14 mm) Diamant Konfigurasi Panduan
Konfigurasi pin untuk ATXMEGA64A1-AUR (100-pin tqfp (14 x 14 mm) pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk ATXMEGA64A1-AUR.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
ATXMEGA64A1-AUR cocok untuk 6 aplikasis: Industrial Motor Control, Sensor Acquisition and Data Logging, Communications Gateway, Programmable Logic Controller, Precision Timing and PWM Systems, Low-Power Embedded Control.
Industrial Motor Control
The ATXMEGA64A1-AUR fits motor-control systems that require several independent timing resources and deterministic event handling. Its eight flexible 16-bit timer/counters provide compare and PWM channels for motor drive, position feedback, and periodic control loops, while the four-channel DMA controller can transfer data with less processor intervention. At a 32 MHz maximum clock, the device also supports responsive supervisory control. The principal design constraint is thermal and signal-integrity planning for PWM outputs, current sensing, and power-stage isolation on the same 100-pin board.
Direkomendasikan
Sensor Acquisition and Data Logging
The ATXMEGA64A1-AUR is appropriate for multi-sensor acquisition systems that must combine periodic sampling with local nonvolatile storage. Its 32 MHz AVR core can coordinate acquisition tasks, while four DMA channels and an eight-channel event system help move sampled data and trigger timing events. The device includes 2 KB of EEPROM and 64 KB of Flash, with a 4 KB boot-code section supporting field-update workflows. Designers should partition memory carefully and use external storage when logging requirements exceed the internal capacities.
Direkomendasikan
Communications Gateway
The ATXMEGA64A1-AUR can serve as the control processor in a compact communications gateway because it combines an external bus interface, multiple timers, event routing, and 78 general-purpose I/O lines. These resources allow protocol timing, status monitoring, and peripheral interfacing to share one 32 MHz microcontroller. The 100-pin TQFP package provides ample pin access for UART, SPI, or other serial interfaces as well as control signals. Layout should isolate high-speed communication lines from analog inputs and maintain short, impedance-conscious return paths.
Direkomendasikan
Programmable Logic Controller
The ATXMEGA64A1-AUR is well matched to compact PLC and automation-controller functions requiring deterministic timers, interrupts, and event-driven I/O. Eight 16-bit timer/counters support timing-intensive tasks, while the programmable multilevel interrupt controller helps organize real-time responses across the 78 available I/O lines. Its internal Flash, SRAM, and EEPROM support a self-contained control program, and the four-channel DMA controller can improve throughput for repetitive data movement. Firmware design should assign timers and interrupt priorities early to prevent contention between control loops.
Direkomendasikan
Precision Timing and PWM Systems
The ATXMEGA64A1-AUR is useful in systems where multiple precision timing outputs and periodic services must be maintained by one microcontroller. Its eight flexible 16-bit timer/counters include compare and PWM channels, and the 16-bit real-time counter supports calendar, interval, or elapsed-time functions. A 32 MHz clock provides computational headroom for control logic, while DMA and the event system can reduce CPU load. Timing accuracy still depends on clock-source tolerance, power quality, firmware latency, and correct peripheral configuration.
Direkomendasikan
Low-Power Embedded Control
The ATXMEGA64A1-AUR supports embedded-control functions requiring moderate processing performance and extensive autonomous peripherals without a separate controller. A 32 MHz AVR core, four DMA channels, event-system routing, and eight timer/counters allow duty-cycled systems to perform useful work between sleep intervals. For new low-power designs, the manufacturer-recommended ATxmega64A1U family should be evaluated because it offers the intended path beyond the A1 device's not-recommended-for-new-designs status.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk ATXMEGA64A1-AUR — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | ATXMEGA64A1U-AUR | ATXMEGA64A1-AU | ATXMEGA64A1U-AU |
|---|---|---|---|---|
| Package | 100-pin TQFP (14 x 14 mm) | 100-pin TQFP (14 x 14 mm) | 100-pin TQFP (14 x 14 mm) | 100-pin TQFP (14 x 14 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB |
| SRAM | 4 KB | 4 KB | 4 KB | 4 KB |
| EEPROM | 2 KB | 2 KB | 2 KB | 2 KB |
| DMA Controller | 4 channels | 4 channels | 4 channels | 4 channels |
| Event System | 8 channels | 8 channels | 8 channels | 8 channels |
| Timer/Counters | 8 flexible 16-bit timer/counters | 8 flexible 16-bit timer/counters | 8 flexible 16-bit timer/counters | 8 flexible 16-bit timer/counters |
| New-Design Position | Not recommended for new designs | U family recommended for new designs | A1 family ordering configuration | U family ordering configuration |
Diferensiator Kunci
- Manufacturer-recommended family path (vsATXMEGA64A1U-AUR)
- Eight-channel event system (vsATXMEGA64A1-AU)
- Eight independent 16-bit timing resources (vsATXMEGA64A1U-AU)
Catatan Desain
Use the exact 100-pin TQFP land pattern from the manufacturer package drawing and verify pin 1 orientation mechanically and electrically. Place programming-interface resistors, decoupling capacitors, and oscillator components directly beside their associated pins. Because this device offers 78 general-purpose I/O lines, keep high-speed or externally accessible nets away from sensitive analog and clock inputs to reduce crosstalk and accidental contention.
Apply the manufacturer-specified voltage range for each operating mode: 1.6 V to 3.6 V for the overall device and 2.7 V to 3.6 V for the core. Provide local high-frequency decoupling at each supply terminal and follow the reference layout for analog and digital supplies. Validate startup behavior, brownout settings, and peripheral operating states against the electrical-characteristics table before fixing the power architecture.
Plan timer outputs, communication interfaces, and sensitive input channels before assigning package pins. Route clocks and high-speed signals over continuous reference planes, avoid splits across plane transitions, and keep return paths short. The event system can connect peripheral signals internally, but external routing still determines edge quality; use series damping only when waveform measurements and the manufacturer's interface guidance justify it.
Do not treat identical memory capacities as proof of firmware or peripheral compatibility when moving between A1 and A1U devices. Review clock defaults, interrupt vectors, timer channels, ADC behavior, low-power modes, and register differences during migration. For existing products, preserve the exact -AUR ordering code and reel orientation; for new designs, follow the manufacturer's recommendation to use ATxmega64A1U.
Informasi Konformitas
The manufacturer product page identifies ATxmega64A1 as not recommended for new designs and recommends ATxmega64A1U. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated for this exact ordering code.