ATXMEGA64A1-AUR 32MHz 64KB Flash MCU | Microchip | TQFP-100
부품 번호: ATXMEGA64A1-AUR ✗ 단종ATXMEGA64A1-AUR 개요
An 8/16-bit AVR microcontroller is a compact embedded-processing device whose architecture executes instructions using an 8-bit register-oriented model while supporting 16-bit operations through paired registers. The XMEGA A1 family extends the AVR architecture into the power-management IC ecosystem with a strong peripheral mix, multiple timer channels, event-system routing, direct-memory access, and a real-time counter. This makes the family useful when deterministic control and specialized hardware peripherals are required without a higher-complexity processor core.
Key device features include in-system-programmable Flash with read-while-write operation, 2 KB of internal EEPROM, 4 KB of SRAM, a four-channel DMA controller, an eight-channel event system, a programmable multilevel interrupt controller, and a 16-bit real-time counter. Eight flexible 16-bit timer/counter blocks provide timing, compare, and PWM functions, while the A1 family also includes an external bus interface and extensive general-purpose I/O.
The AVR instruction set combines compact 16-bit opcodes, multiply-and-multiply-accumulate support, and dedicated event-handling peripherals. Read-while-write Flash operation allows code execution to continue during suitable programming activity, while the DMA and event system reduce CPU intervention for data movement and time-critical signal routing. These characteristics distinguish the device from simpler 8-bit AVR microcontrollers that provide fewer autonomous peripherals.
Typical uses include industrial sensor acquisition, motor and actuator control, communications gateways, data loggers, and compact embedded control platforms. The multiple timers support motor PWM, waveform generation, and periodic servicing, while the external bus interface can connect the controller to additional digital devices. The 100-pin TQFP package also provides enough I/O and power connectivity for systems requiring several peripheral functions on one board.
When designing around the ATXMEGA64A1-AUR, use the manufacturer datasheet pin table for every signal and exposed-pad connection, and preserve the required decoupling and programming-interface layout. Confirm that the chosen peripheral mix matches the exact A1 device rather than assuming that all XMEGA family members share identical pin assignments. The manufacturer also identifies the A1 device as not recommended for new designs and directs new designs toward ATxmega64A1U.
This product analysis combines the exact device characteristics with practical peripheral-selection guidance, replacement considerations, and PCB-focused design notes. It helps engineers distinguish exact ordering-code variants, evaluate low-power migration options, and plan firmware, decoupling, timing, and mixed-signal layouts before committing a 100-pin design to production.
드롭인 대체품: ATXMEGA64A1-AUR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ATXMEGA64A1-AUR (동일 폼 팩터 및 풋프린트) — 차이점: External Bus Interface, Package, CPU Architecture, General-Purpose I/O, Product Type.
ATXMEGA64A1U-AUR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ATXMEGA64A1-AU
✅ 드롭인가격 문의
데이터시트 보기 →ATXMEGA64A1U-AU
✅ 드롭인가격 문의
데이터시트 보기 →ATXMEGA64A1-AUR 최대 정격 & 전기적 특성
| CPU Architecture | 8/16-bit AVR RISC |
| 최대 클록 주파수 | 32 MHz |
| Program Memory Type | Self-programming Flash |
| Program Memory Size | 64 KB (32K x 16) |
| Boot Loader Section | 4 KB |
| SRAM Size | 4 KB |
| EEPROM Size | 2 KB |
| Supply Voltage Range | 1.6 V to 3.6 V |
| Core Supply Voltage | 2.7 V to 3.6 V |
| DMA Controller | 4 channels |
| Event System | 8 channels |
| Real-Time Counter | 16-bit |
| Timer/Counter Count | 8 flexible 16-bit timer/counters |
| General-Purpose I/O | 78 lines |
| 패키지 | 100-pin TQFP (14 x 14 mm) |
| 실장 유형 | Surface mount |
| External Bus Interface | Present |
| Flash Read-While-Write | Supported |
ATXMEGA64A1-AUR 100-pin tqfp (14 x 14 mm) 핀 구성 가이드
ATXMEGA64A1-AUR(100-pin tqfp (14 x 14 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: ATXMEGA64A1-AUR.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ATXMEGA64A1-AUR 적합 용도: 6 애플리케이션s: Industrial Motor Control, Sensor Acquisition and Data Logging, Communications Gateway, Programmable Logic Controller, Precision Timing and PWM Systems, Low-Power Embedded Control.
Industrial Motor Control
The ATXMEGA64A1-AUR fits motor-control systems that require several independent timing resources and deterministic event handling. Its eight flexible 16-bit timer/counters provide compare and PWM channels for motor drive, position feedback, and periodic control loops, while the four-channel DMA controller can transfer data with less processor intervention. At a 32 MHz maximum clock, the device also supports responsive supervisory control. The principal design constraint is thermal and signal-integrity planning for PWM outputs, current sensing, and power-stage isolation on the same 100-pin board.
추천
Sensor Acquisition and Data Logging
The ATXMEGA64A1-AUR is appropriate for multi-sensor acquisition systems that must combine periodic sampling with local nonvolatile storage. Its 32 MHz AVR core can coordinate acquisition tasks, while four DMA channels and an eight-channel event system help move sampled data and trigger timing events. The device includes 2 KB of EEPROM and 64 KB of Flash, with a 4 KB boot-code section supporting field-update workflows. Designers should partition memory carefully and use external storage when logging requirements exceed the internal capacities.
추천
Communications Gateway
The ATXMEGA64A1-AUR can serve as the control processor in a compact communications gateway because it combines an external bus interface, multiple timers, event routing, and 78 general-purpose I/O lines. These resources allow protocol timing, status monitoring, and peripheral interfacing to share one 32 MHz microcontroller. The 100-pin TQFP package provides ample pin access for UART, SPI, or other serial interfaces as well as control signals. Layout should isolate high-speed communication lines from analog inputs and maintain short, impedance-conscious return paths.
추천
Programmable Logic Controller
The ATXMEGA64A1-AUR is well matched to compact PLC and automation-controller functions requiring deterministic timers, interrupts, and event-driven I/O. Eight 16-bit timer/counters support timing-intensive tasks, while the programmable multilevel interrupt controller helps organize real-time responses across the 78 available I/O lines. Its internal Flash, SRAM, and EEPROM support a self-contained control program, and the four-channel DMA controller can improve throughput for repetitive data movement. Firmware design should assign timers and interrupt priorities early to prevent contention between control loops.
추천
Precision Timing and PWM Systems
The ATXMEGA64A1-AUR is useful in systems where multiple precision timing outputs and periodic services must be maintained by one microcontroller. Its eight flexible 16-bit timer/counters include compare and PWM channels, and the 16-bit real-time counter supports calendar, interval, or elapsed-time functions. A 32 MHz clock provides computational headroom for control logic, while DMA and the event system can reduce CPU load. Timing accuracy still depends on clock-source tolerance, power quality, firmware latency, and correct peripheral configuration.
추천
Low-Power Embedded Control
The ATXMEGA64A1-AUR supports embedded-control functions requiring moderate processing performance and extensive autonomous peripherals without a separate controller. A 32 MHz AVR core, four DMA channels, event-system routing, and eight timer/counters allow duty-cycled systems to perform useful work between sleep intervals. For new low-power designs, the manufacturer-recommended ATxmega64A1U family should be evaluated because it offers the intended path beyond the A1 device's not-recommended-for-new-designs status.
추천
추천 제품 요약
엔지니어링 참조 데이터: ATXMEGA64A1-AUR — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ATXMEGA64A1U-AUR | ATXMEGA64A1-AU | ATXMEGA64A1U-AU |
|---|---|---|---|---|
| Package | 100-pin TQFP (14 x 14 mm) | 100-pin TQFP (14 x 14 mm) | 100-pin TQFP (14 x 14 mm) | 100-pin TQFP (14 x 14 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB |
| SRAM | 4 KB | 4 KB | 4 KB | 4 KB |
| EEPROM | 2 KB | 2 KB | 2 KB | 2 KB |
| DMA Controller | 4 channels | 4 channels | 4 channels | 4 channels |
| Event System | 8 channels | 8 channels | 8 channels | 8 channels |
| Timer/Counters | 8 flexible 16-bit timer/counters | 8 flexible 16-bit timer/counters | 8 flexible 16-bit timer/counters | 8 flexible 16-bit timer/counters |
| New-Design Position | Not recommended for new designs | U family recommended for new designs | A1 family ordering configuration | U family ordering configuration |
주요 차별점
- Manufacturer-recommended family path (vs ATXMEGA64A1U-AUR)
- Eight-channel event system (vs ATXMEGA64A1-AU)
- Eight independent 16-bit timing resources (vs ATXMEGA64A1U-AU)
설계 노트
Use the exact 100-pin TQFP land pattern from the manufacturer package drawing and verify pin 1 orientation mechanically and electrically. Place programming-interface resistors, decoupling capacitors, and oscillator components directly beside their associated pins. Because this device offers 78 general-purpose I/O lines, keep high-speed or externally accessible nets away from sensitive analog and clock inputs to reduce crosstalk and accidental contention.
Apply the manufacturer-specified voltage range for each operating mode: 1.6 V to 3.6 V for the overall device and 2.7 V to 3.6 V for the core. Provide local high-frequency decoupling at each supply terminal and follow the reference layout for analog and digital supplies. Validate startup behavior, brownout settings, and peripheral operating states against the electrical-characteristics table before fixing the power architecture.
Plan timer outputs, communication interfaces, and sensitive input channels before assigning package pins. Route clocks and high-speed signals over continuous reference planes, avoid splits across plane transitions, and keep return paths short. The event system can connect peripheral signals internally, but external routing still determines edge quality; use series damping only when waveform measurements and the manufacturer's interface guidance justify it.
Do not treat identical memory capacities as proof of firmware or peripheral compatibility when moving between A1 and A1U devices. Review clock defaults, interrupt vectors, timer channels, ADC behavior, low-power modes, and register differences during migration. For existing products, preserve the exact -AUR ordering code and reel orientation; for new designs, follow the manufacturer's recommendation to use ATxmega64A1U.
규정 준수 정보
The manufacturer product page identifies ATxmega64A1 as not recommended for new designs and recommends ATxmega64A1U. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated for this exact ordering code.