ATXMEGA64A1-AUR 32MHz 64KB Flash MCU | Microchip | TQFP-100
MPN: ATXMEGA64A1-AUR ✗ 停產ATXMEGA64A1-AUR 概覽
An 8/16-bit AVR microcontroller is a compact embedded-processing device whose architecture executes instructions using an 8-bit register-oriented model while supporting 16-bit operations through paired registers. The XMEGA A1 family extends the AVR architecture into the power-management IC ecosystem with a strong peripheral mix, multiple timer channels, event-system routing, direct-memory access, and a real-time counter. This makes the family useful when deterministic control and specialized hardware peripherals are required without a higher-complexity processor core.
Key device features include in-system-programmable Flash with read-while-write operation, 2 KB of internal EEPROM, 4 KB of SRAM, a four-channel DMA controller, an eight-channel event system, a programmable multilevel interrupt controller, and a 16-bit real-time counter. Eight flexible 16-bit timer/counter blocks provide timing, compare, and PWM functions, while the A1 family also includes an external bus interface and extensive general-purpose I/O.
The AVR instruction set combines compact 16-bit opcodes, multiply-and-multiply-accumulate support, and dedicated event-handling peripherals. Read-while-write Flash operation allows code execution to continue during suitable programming activity, while the DMA and event system reduce CPU intervention for data movement and time-critical signal routing. These characteristics distinguish the device from simpler 8-bit AVR microcontrollers that provide fewer autonomous peripherals.
Typical uses include industrial sensor acquisition, motor and actuator control, communications gateways, data loggers, and compact embedded control platforms. The multiple timers support motor PWM, waveform generation, and periodic servicing, while the external bus interface can connect the controller to additional digital devices. The 100-pin TQFP package also provides enough I/O and power connectivity for systems requiring several peripheral functions on one board.
When designing around the ATXMEGA64A1-AUR, use the manufacturer datasheet pin table for every signal and exposed-pad connection, and preserve the required decoupling and programming-interface layout. Confirm that the chosen peripheral mix matches the exact A1 device rather than assuming that all XMEGA family members share identical pin assignments. The manufacturer also identifies the A1 device as not recommended for new designs and directs new designs toward ATxmega64A1U.
This product analysis combines the exact device characteristics with practical peripheral-selection guidance, replacement considerations, and PCB-focused design notes. It helps engineers distinguish exact ordering-code variants, evaluate low-power migration options, and plan firmware, decoupling, timing, and mixed-signal layouts before committing a 100-pin design to production.
直接替換替代品,適用於 ATXMEGA64A1-AUR — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ATXMEGA64A1-AUR (相同外形與佔位) — 差異在於 External Bus Interface, Package, CPU Architecture, General-Purpose I/O, Product Type.
ATXMEGA64A1U-AUR
✅ 直接替換📋 參考替代品(不在目錄中)
ATXMEGA64A1-AU
✅ 直接替換聯絡詢價
查看資料表 →ATXMEGA64A1U-AU
✅ 直接替換聯絡詢價
查看資料表 →ATXMEGA64A1-AUR 最大額定值與電氣特性
| CPU Architecture | 8/16-bit AVR RISC |
| 最大時脈頻率 | 32 MHz |
| Program Memory Type | Self-programming Flash |
| Program Memory Size | 64 KB (32K x 16) |
| Boot Loader Section | 4 KB |
| SRAM Size | 4 KB |
| EEPROM Size | 2 KB |
| Supply Voltage Range | 1.6 V to 3.6 V |
| Core Supply Voltage | 2.7 V to 3.6 V |
| DMA Controller | 4 channels |
| Event System | 8 channels |
| Real-Time Counter | 16-bit |
| Timer/Counter Count | 8 flexible 16-bit timer/counters |
| General-Purpose I/O | 78 lines |
| 封裝 | 100-pin TQFP (14 x 14 mm) |
| 安裝類型 | Surface mount |
| External Bus Interface | Present |
| Flash Read-While-Write | Supported |
ATXMEGA64A1-AUR 100-pin tqfp (14 x 14 mm) 腳位配置指南
ATXMEGA64A1-AUR(100-pin tqfp (14 x 14 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: ATXMEGA64A1-AUR.
請參閱 資料表 以查看完整腳位配置。
典型應用
ATXMEGA64A1-AUR 適用於 6 應用s: Industrial Motor Control, Sensor Acquisition and Data Logging, Communications Gateway, Programmable Logic Controller, Precision Timing and PWM Systems, Low-Power Embedded Control.
Industrial Motor Control
The ATXMEGA64A1-AUR fits motor-control systems that require several independent timing resources and deterministic event handling. Its eight flexible 16-bit timer/counters provide compare and PWM channels for motor drive, position feedback, and periodic control loops, while the four-channel DMA controller can transfer data with less processor intervention. At a 32 MHz maximum clock, the device also supports responsive supervisory control. The principal design constraint is thermal and signal-integrity planning for PWM outputs, current sensing, and power-stage isolation on the same 100-pin board.
推薦
Sensor Acquisition and Data Logging
The ATXMEGA64A1-AUR is appropriate for multi-sensor acquisition systems that must combine periodic sampling with local nonvolatile storage. Its 32 MHz AVR core can coordinate acquisition tasks, while four DMA channels and an eight-channel event system help move sampled data and trigger timing events. The device includes 2 KB of EEPROM and 64 KB of Flash, with a 4 KB boot-code section supporting field-update workflows. Designers should partition memory carefully and use external storage when logging requirements exceed the internal capacities.
推薦
Communications Gateway
The ATXMEGA64A1-AUR can serve as the control processor in a compact communications gateway because it combines an external bus interface, multiple timers, event routing, and 78 general-purpose I/O lines. These resources allow protocol timing, status monitoring, and peripheral interfacing to share one 32 MHz microcontroller. The 100-pin TQFP package provides ample pin access for UART, SPI, or other serial interfaces as well as control signals. Layout should isolate high-speed communication lines from analog inputs and maintain short, impedance-conscious return paths.
推薦
Programmable Logic Controller
The ATXMEGA64A1-AUR is well matched to compact PLC and automation-controller functions requiring deterministic timers, interrupts, and event-driven I/O. Eight 16-bit timer/counters support timing-intensive tasks, while the programmable multilevel interrupt controller helps organize real-time responses across the 78 available I/O lines. Its internal Flash, SRAM, and EEPROM support a self-contained control program, and the four-channel DMA controller can improve throughput for repetitive data movement. Firmware design should assign timers and interrupt priorities early to prevent contention between control loops.
推薦
Precision Timing and PWM Systems
The ATXMEGA64A1-AUR is useful in systems where multiple precision timing outputs and periodic services must be maintained by one microcontroller. Its eight flexible 16-bit timer/counters include compare and PWM channels, and the 16-bit real-time counter supports calendar, interval, or elapsed-time functions. A 32 MHz clock provides computational headroom for control logic, while DMA and the event system can reduce CPU load. Timing accuracy still depends on clock-source tolerance, power quality, firmware latency, and correct peripheral configuration.
推薦
Low-Power Embedded Control
The ATXMEGA64A1-AUR supports embedded-control functions requiring moderate processing performance and extensive autonomous peripherals without a separate controller. A 32 MHz AVR core, four DMA channels, event-system routing, and eight timer/counters allow duty-cycled systems to perform useful work between sleep intervals. For new low-power designs, the manufacturer-recommended ATxmega64A1U family should be evaluated because it offers the intended path beyond the A1 device's not-recommended-for-new-designs status.
推薦
推薦產品摘要
工程參考資料,適用於 ATXMEGA64A1-AUR — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ATXMEGA64A1U-AUR | ATXMEGA64A1-AU | ATXMEGA64A1U-AU |
|---|---|---|---|---|
| Package | 100-pin TQFP (14 x 14 mm) | 100-pin TQFP (14 x 14 mm) | 100-pin TQFP (14 x 14 mm) | 100-pin TQFP (14 x 14 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB |
| SRAM | 4 KB | 4 KB | 4 KB | 4 KB |
| EEPROM | 2 KB | 2 KB | 2 KB | 2 KB |
| DMA Controller | 4 channels | 4 channels | 4 channels | 4 channels |
| Event System | 8 channels | 8 channels | 8 channels | 8 channels |
| Timer/Counters | 8 flexible 16-bit timer/counters | 8 flexible 16-bit timer/counters | 8 flexible 16-bit timer/counters | 8 flexible 16-bit timer/counters |
| New-Design Position | Not recommended for new designs | U family recommended for new designs | A1 family ordering configuration | U family ordering configuration |
主要差異化特點
- Manufacturer-recommended family path (對比ATXMEGA64A1U-AUR)
- Eight-channel event system (對比ATXMEGA64A1-AU)
- Eight independent 16-bit timing resources (對比ATXMEGA64A1U-AU)
設計說明
Use the exact 100-pin TQFP land pattern from the manufacturer package drawing and verify pin 1 orientation mechanically and electrically. Place programming-interface resistors, decoupling capacitors, and oscillator components directly beside their associated pins. Because this device offers 78 general-purpose I/O lines, keep high-speed or externally accessible nets away from sensitive analog and clock inputs to reduce crosstalk and accidental contention.
Apply the manufacturer-specified voltage range for each operating mode: 1.6 V to 3.6 V for the overall device and 2.7 V to 3.6 V for the core. Provide local high-frequency decoupling at each supply terminal and follow the reference layout for analog and digital supplies. Validate startup behavior, brownout settings, and peripheral operating states against the electrical-characteristics table before fixing the power architecture.
Plan timer outputs, communication interfaces, and sensitive input channels before assigning package pins. Route clocks and high-speed signals over continuous reference planes, avoid splits across plane transitions, and keep return paths short. The event system can connect peripheral signals internally, but external routing still determines edge quality; use series damping only when waveform measurements and the manufacturer's interface guidance justify it.
Do not treat identical memory capacities as proof of firmware or peripheral compatibility when moving between A1 and A1U devices. Review clock defaults, interrupt vectors, timer channels, ADC behavior, low-power modes, and register differences during migration. For existing products, preserve the exact -AUR ordering code and reel orientation; for new designs, follow the manufacturer's recommendation to use ATxmega64A1U.
合規資訊
The manufacturer product page identifies ATxmega64A1 as not recommended for new designs and recommends ATxmega64A1U. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not stated for this exact ordering code.