CD4020BPW - 14-Stage CMOS Counter Divider | Texas Instruments
MPN: CD4020BPW ✓ AktifCD4020BPW Ringkasan
A CMOS ripple-carry counter is a logic-IC counter in which cascaded flip-flop stages advance sequentially. It belongs to the counter and divider hierarchy within digital logic ICs, where counters divide an input frequency and provide repeating binary sequences. The CD4020BPW supports the classic CD4000-series function while using a surface-mount TSSOP-16 footprint for compact PCB layouts.
The primary functional characteristics are a 14-stage count capacity, binary counting behavior, negative-edge clock triggering, and one counting element. Its serial output provides access to a divided clock derived from the input frequency. Because it is a ripple-carry implementation, the output stages do not switch simultaneously; designers should account for propagation delay when using closely related outputs as counter-phase signals.
The CD4020BPW uses CMOS logic and operates across a wide -55°C to 125°C temperature range. Its 16-pin TSSOP package is identified as 0.173 inch, or 4.40 mm, wide. The PW orderable variant is associated with tube packaging, making it suitable for production processes that use tubes and accept the corresponding MSL handling requirements.
Typical uses include digital frequency division, clock generation, timing-event counting, industrial control logic, and low-power CMOS instrumentation. The device is useful when a circuit needs multiple binary-derived timing points or a stable divided clock without implementing a programmable counter in a microcontroller or FPGA.
PCB implementation should reserve the correct clock, reset, supply, and output connections according to the manufacturer pin-description table. Keep the clock trace short, provide a stable supply reference, and avoid relying on simultaneous transitions from different ripple stages where timing skew would affect control logic.
This page combines the manufacturer product definition, distributor package information, ordering details, and engineering guidance for the CD4020BPW. It also identifies where second-source and same-footprint alternatives require independent verification, helping engineers evaluate counter implementations without confusing different package variants with true drop-in equivalents.
Alternatif penggantian untuk CD4020BPW — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Tidak ada alternatif pengganti yang tersedia untuk produk ini.
Permintaan AlternatifCD4020BPW Rating Maksimal & Karakteristik Listrik
| Counter Type | Binary ripple-carry counter/divider |
| Number of Stages | 14 stages |
| Number of Counter Elements | 1 element |
| Counting Sequence | Binary |
| Clock Edge | Negative edge |
| Logic Technology | CMOS |
| Logic Family | CD4000B series |
| Rentang Suhu Kerja | -55°C to 125°C |
| Paket | 16-pin TSSOP |
| Package Width | 0.173 inch (4.40 mm) |
| Tipe Mounting | Surface mount |
| Packaging | Tube |
| Status RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
CD4020BPW 0.173 inch (4.40 mm) Diamant Konfigurasi Panduan
Konfigurasi pin untuk CD4020BPW (0.173 inch (4.40 mm) pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk CD4020BPW.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
CD4020BPW cocok untuk 6 aplikasis: Fixed Frequency Division, Digital Clock Generation, Industrial Event Counting, Timer and Retriggerable Timing, Low-Power CMOS Logic, Frequency-Ratio Monitoring.
Fixed Frequency Division
The CD4020BPW is well suited to producing a stable divided clock from a periodic input signal. Its 14-stage ripple architecture supports multiple binary divide relationships, allowing one source clock to establish several related timing points without a programmable controller. The negative-edge trigger and -55°C to 125°C operating range are useful for industrial timing systems that require fixed CMOS logic behavior. Because the stages are ripple-connected, propagation delay accumulates from stage to stage; the circuit should therefore avoid requiring simultaneous edges from multiple outputs. The 16-pin TSSOP package also keeps the counter compact while exposing the available divided outputs for timing-control logic.
Direkomendasikan
Digital Clock Generation
A CD4020BPW can divide a system oscillator into a lower-frequency binary clock for sequential logic, sampling systems, or periodic control events. The 14-stage counter provides enough depth for coarse divider ratios, while the one-element architecture reduces the component count compared with a chain of discrete flip-flops. Negative-edge counting makes the input transition convention important during timing validation. Engineers should compare the manufacturer's maximum input frequency and propagation-delay limits against the shortest clock interval, and they should avoid treating a later ripple stage as a glitch-free synchronous phase reference without additional analysis.
Direkomendasikan
Industrial Event Counting
The CD4020BPW can count recurring input events and expose binary divide stages for supervisory logic in industrial equipment. Its -55°C to 125°C operating range supports temperature-controlled equipment, while the CMOS implementation fits systems already standardized around CD4000-series logic. The counter is most appropriate when the design needs repeatable event-derived timing rather than a software-maintained count. Reset release and input conditioning should be handled so that every event produces one unambiguous count. Long traces, contact bounce, and slow input edges can affect interpretation, so external conditioning may be needed for mechanical or noisy sources.
Direkomendasikan
Timer and Retriggerable Timing
CD4020BPW-based circuits can establish long timing intervals by counting oscillator periods and decoding selected binary stages. The 14-stage depth allows substantial division of a high-frequency source, which is useful in trigger, watchdog, and delay blocks where a fixed hardware timeout is desirable. Compared with a software timer, the counter continues operating without processor attention and can provide a direct divided-clock output. Timing accuracy still depends on the source oscillator and the counter's propagation behavior. The design should specify margin against the minimum valid clock pulse and avoid resetting the counter at a rate that could race with the selected decoded stage.
Direkomendasikan
Low-Power CMOS Logic
The CD4020BPW is appropriate for low-power CMOS subsystems that need counting without the overhead of a programmable processor. A single counter replaces cascaded divider logic, reducing board area and component count while retaining a straightforward hardware troubleshooting path. Its 16-pin TSSOP package is compatible with compact surface-mount assemblies, and the -55°C to 125°C range covers demanding equipment environments. Low-power suitability should be evaluated at the actual clock rate and supply voltage because dynamic current and switching activity depend on operating conditions. Avoid tying unused inputs to an unknown level and follow the manufacturer guidance for unused counter stages.
Direkomendasikan
Frequency-Ratio Monitoring
The CD4020BPW can create a divided reference that permits a downstream circuit to compare or monitor a recurring input frequency. Binary outputs from different stages provide related divide ratios, which can be selected by surrounding logic or measurement circuitry. The single-element 14-stage architecture is useful in simple instrumentation where a dedicated programmable timer would be excessive. For accurate measurement, the input signal must remain stable enough for the counter to recognize each active edge, and the circuit should account for propagation delay when interpreting closely spaced outputs. A digital timer, microcontroller, or FPGA may be preferable when the ratio must be changed dynamically.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk CD4020BPW — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini |
|---|---|
| Manufacturer | Texas Instruments |
| Package | 16-pin TSSOP, 0.173 inch (4.40 mm) width |
| Counter Type | Binary ripple-carry counter/divider |
| Number of Stages | 14 stages |
| Number of Counter Elements | 1 element |
| Clock Edge | Negative edge |
| Logic Technology | CMOS |
| Operating Temperature Range | -55°C to 125°C |
| Packaging | Tube |
Catatan Desain
Treat the CD4020BPW as a ripple counter rather than a synchronous counter. Outputs from different stages change at different times, so decoding two nearby stages can produce short or unequal transition intervals. Decode only stages whose timing relationship is acceptable, or add a latch or synchronizer when downstream logic requires simultaneous, clean edges.
Route the clock input as a short trace and maintain a continuous ground reference beneath the TSSOP footprint. Place input conditioning or reset components near the associated pins so that ringing and slow edges do not propagate across the board. Use the manufacturer pin-description table to preserve the exact 16-pin TSSOP orientation and confirm the exposed standard orientation before assembly.
Check that the incoming clock meets the manufacturer's minimum pulse-width and transition-time requirements. A clean frequency divider still produces incorrect counts when the clock has excessive rise or fall time, double transitions, or insufficient pulse width. For noisy contacts or long wiring, add conditioning before the counter and keep the return path adjacent to the clock trace.
Design the supply path for the actual clock activity and the number of outputs being used. Dynamic current increases as switching frequency rises, even though the counter is implemented in CMOS. Keep the supply bypass network close to the device, verify the acceptable supply range in the manufacturer datasheet, and avoid introducing ground current through sensitive timing traces.
Informasi Konformitas
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are identified for the exact orderable MPN. Consult the current Texas Instruments product page and applicable quality documents before making a compliance determination.