CD4020BPW - 14-Stage CMOS Counter Divider | Texas Instruments
부품 번호: CD4020BPW ✓ 활성CD4020BPW 개요
A CMOS ripple-carry counter is a logic-IC counter in which cascaded flip-flop stages advance sequentially. It belongs to the counter and divider hierarchy within digital logic ICs, where counters divide an input frequency and provide repeating binary sequences. The CD4020BPW supports the classic CD4000-series function while using a surface-mount TSSOP-16 footprint for compact PCB layouts.
The primary functional characteristics are a 14-stage count capacity, binary counting behavior, negative-edge clock triggering, and one counting element. Its serial output provides access to a divided clock derived from the input frequency. Because it is a ripple-carry implementation, the output stages do not switch simultaneously; designers should account for propagation delay when using closely related outputs as counter-phase signals.
The CD4020BPW uses CMOS logic and operates across a wide -55°C to 125°C temperature range. Its 16-pin TSSOP package is identified as 0.173 inch, or 4.40 mm, wide. The PW orderable variant is associated with tube packaging, making it suitable for production processes that use tubes and accept the corresponding MSL handling requirements.
Typical uses include digital frequency division, clock generation, timing-event counting, industrial control logic, and low-power CMOS instrumentation. The device is useful when a circuit needs multiple binary-derived timing points or a stable divided clock without implementing a programmable counter in a microcontroller or FPGA.
PCB implementation should reserve the correct clock, reset, supply, and output connections according to the manufacturer pin-description table. Keep the clock trace short, provide a stable supply reference, and avoid relying on simultaneous transitions from different ripple stages where timing skew would affect control logic.
This page combines the manufacturer product definition, distributor package information, ordering details, and engineering guidance for the CD4020BPW. It also identifies where second-source and same-footprint alternatives require independent verification, helping engineers evaluate counter implementations without confusing different package variants with true drop-in equivalents.
드롭인 대체품: CD4020BPW — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청CD4020BPW 최대 정격 & 전기적 특성
| Counter Type | Binary ripple-carry counter/divider |
| Number of Stages | 14 stages |
| Number of Counter Elements | 1 element |
| Counting Sequence | Binary |
| Clock Edge | Negative edge |
| Logic Technology | CMOS |
| Logic Family | CD4000B series |
| 동작 온도 범위 | -55°C to 125°C |
| 패키지 | 16-pin TSSOP |
| Package Width | 0.173 inch (4.40 mm) |
| 실장 유형 | Surface mount |
| Packaging | Tube |
| RoHS 상태 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
CD4020BPW 0.173 inch (4.40 mm) 핀 구성 가이드
CD4020BPW(0.173 inch (4.40 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: CD4020BPW.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
CD4020BPW 적합 용도: 6 애플리케이션s: Fixed Frequency Division, Digital Clock Generation, Industrial Event Counting, Timer and Retriggerable Timing, Low-Power CMOS Logic, Frequency-Ratio Monitoring.
Fixed Frequency Division
The CD4020BPW is well suited to producing a stable divided clock from a periodic input signal. Its 14-stage ripple architecture supports multiple binary divide relationships, allowing one source clock to establish several related timing points without a programmable controller. The negative-edge trigger and -55°C to 125°C operating range are useful for industrial timing systems that require fixed CMOS logic behavior. Because the stages are ripple-connected, propagation delay accumulates from stage to stage; the circuit should therefore avoid requiring simultaneous edges from multiple outputs. The 16-pin TSSOP package also keeps the counter compact while exposing the available divided outputs for timing-control logic.
추천
Digital Clock Generation
A CD4020BPW can divide a system oscillator into a lower-frequency binary clock for sequential logic, sampling systems, or periodic control events. The 14-stage counter provides enough depth for coarse divider ratios, while the one-element architecture reduces the component count compared with a chain of discrete flip-flops. Negative-edge counting makes the input transition convention important during timing validation. Engineers should compare the manufacturer's maximum input frequency and propagation-delay limits against the shortest clock interval, and they should avoid treating a later ripple stage as a glitch-free synchronous phase reference without additional analysis.
추천
Industrial Event Counting
The CD4020BPW can count recurring input events and expose binary divide stages for supervisory logic in industrial equipment. Its -55°C to 125°C operating range supports temperature-controlled equipment, while the CMOS implementation fits systems already standardized around CD4000-series logic. The counter is most appropriate when the design needs repeatable event-derived timing rather than a software-maintained count. Reset release and input conditioning should be handled so that every event produces one unambiguous count. Long traces, contact bounce, and slow input edges can affect interpretation, so external conditioning may be needed for mechanical or noisy sources.
추천
Timer and Retriggerable Timing
CD4020BPW-based circuits can establish long timing intervals by counting oscillator periods and decoding selected binary stages. The 14-stage depth allows substantial division of a high-frequency source, which is useful in trigger, watchdog, and delay blocks where a fixed hardware timeout is desirable. Compared with a software timer, the counter continues operating without processor attention and can provide a direct divided-clock output. Timing accuracy still depends on the source oscillator and the counter's propagation behavior. The design should specify margin against the minimum valid clock pulse and avoid resetting the counter at a rate that could race with the selected decoded stage.
추천
Low-Power CMOS Logic
The CD4020BPW is appropriate for low-power CMOS subsystems that need counting without the overhead of a programmable processor. A single counter replaces cascaded divider logic, reducing board area and component count while retaining a straightforward hardware troubleshooting path. Its 16-pin TSSOP package is compatible with compact surface-mount assemblies, and the -55°C to 125°C range covers demanding equipment environments. Low-power suitability should be evaluated at the actual clock rate and supply voltage because dynamic current and switching activity depend on operating conditions. Avoid tying unused inputs to an unknown level and follow the manufacturer guidance for unused counter stages.
추천
Frequency-Ratio Monitoring
The CD4020BPW can create a divided reference that permits a downstream circuit to compare or monitor a recurring input frequency. Binary outputs from different stages provide related divide ratios, which can be selected by surrounding logic or measurement circuitry. The single-element 14-stage architecture is useful in simple instrumentation where a dedicated programmable timer would be excessive. For accurate measurement, the input signal must remain stable enough for the counter to recognize each active edge, and the circuit should account for propagation delay when interpreting closely spaced outputs. A digital timer, microcontroller, or FPGA may be preferable when the ratio must be changed dynamically.
추천
추천 제품 요약
엔지니어링 참조 데이터: CD4020BPW — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Manufacturer | Texas Instruments |
| Package | 16-pin TSSOP, 0.173 inch (4.40 mm) width |
| Counter Type | Binary ripple-carry counter/divider |
| Number of Stages | 14 stages |
| Number of Counter Elements | 1 element |
| Clock Edge | Negative edge |
| Logic Technology | CMOS |
| Operating Temperature Range | -55°C to 125°C |
| Packaging | Tube |
설계 노트
Treat the CD4020BPW as a ripple counter rather than a synchronous counter. Outputs from different stages change at different times, so decoding two nearby stages can produce short or unequal transition intervals. Decode only stages whose timing relationship is acceptable, or add a latch or synchronizer when downstream logic requires simultaneous, clean edges.
Route the clock input as a short trace and maintain a continuous ground reference beneath the TSSOP footprint. Place input conditioning or reset components near the associated pins so that ringing and slow edges do not propagate across the board. Use the manufacturer pin-description table to preserve the exact 16-pin TSSOP orientation and confirm the exposed standard orientation before assembly.
Check that the incoming clock meets the manufacturer's minimum pulse-width and transition-time requirements. A clean frequency divider still produces incorrect counts when the clock has excessive rise or fall time, double transitions, or insufficient pulse width. For noisy contacts or long wiring, add conditioning before the counter and keep the return path adjacent to the clock trace.
Design the supply path for the actual clock activity and the number of outputs being used. Dynamic current increases as switching frequency rises, even though the counter is implemented in CMOS. Keep the supply bypass network close to the device, verify the acceptable supply range in the manufacturer datasheet, and avoid introducing ground current through sensitive timing traces.
규정 준수 정보
No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are identified for the exact orderable MPN. Consult the current Texas Instruments product page and applicable quality documents before making a compliance determination.