Texas Instruments

CD4020BPW - 14-Stage CMOS Counter Divider | Texas Instruments

MPN: CD4020BPW ✓ Active
16-pin TSSOP Package Negative edge Speed
MOQ: 1 |

CD4020BPW Overview

Texas Instruments CD4020BPW is a CMOS 14-stage ripple-carry binary counter and divider with one counter element, negative-edge triggering, and a 16-pin TSSOP package rated for operation from -55°C to 125°C. The counter advances one binary count for each active clock transition, allowing a single external clock to generate divided, modulo-2^N timing relationships.

A CMOS ripple-carry counter is a logic-IC counter in which cascaded flip-flop stages advance sequentially. It belongs to the counter and divider hierarchy within digital logic ICs, where counters divide an input frequency and provide repeating binary sequences. The CD4020BPW supports the classic CD4000-series function while using a surface-mount TSSOP-16 footprint for compact PCB layouts.

The primary functional characteristics are a 14-stage count capacity, binary counting behavior, negative-edge clock triggering, and one counting element. Its serial output provides access to a divided clock derived from the input frequency. Because it is a ripple-carry implementation, the output stages do not switch simultaneously; designers should account for propagation delay when using closely related outputs as counter-phase signals.

The CD4020BPW uses CMOS logic and operates across a wide -55°C to 125°C temperature range. Its 16-pin TSSOP package is identified as 0.173 inch, or 4.40 mm, wide. The PW orderable variant is associated with tube packaging, making it suitable for production processes that use tubes and accept the corresponding MSL handling requirements.

Typical uses include digital frequency division, clock generation, timing-event counting, industrial control logic, and low-power CMOS instrumentation. The device is useful when a circuit needs multiple binary-derived timing points or a stable divided clock without implementing a programmable counter in a microcontroller or FPGA.

PCB implementation should reserve the correct clock, reset, supply, and output connections according to the manufacturer pin-description table. Keep the clock trace short, provide a stable supply reference, and avoid relying on simultaneous transitions from different ripple stages where timing skew would affect control logic.

This page combines the manufacturer product definition, distributor package information, ordering details, and engineering guidance for the CD4020BPW. It also identifies where second-source and same-footprint alternatives require independent verification, helping engineers evaluate counter implementations without confusing different package variants with true drop-in equivalents.

Drop-in alternatives for CD4020BPW — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

No drop-in alternatives available for this product.

Request Alternatives

CD4020BPW Maximum Ratings & Electrical Characteristics

Counter Type Binary ripple-carry counter/divider
Number of Stages 14 stages
Number of Counter Elements 1 element
Counting Sequence Binary
Clock Edge Negative edge
Logic Technology CMOS
Logic Family CD4000B series
Operating Temperature Range -55°C to 125°C
Package 16-pin TSSOP
Package Width 0.173 inch (4.40 mm)
Mounting Type Surface mount
Packaging Tube
RoHS Status unknown
REACH Status unknown
AEC-Q100 Qualification unknown

CD4020BPW 0.173 inch (4.40 mm) Pin Configuration Guide

Pin configuration for CD4020BPW (0.173 inch (4.40 mm) package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.

0.173 inch (4.40 mm) package pinout diagram for CD4020BPW

No detailed pinout data available for CD4020BPW.

Refer to the datasheet for full pin configuration.

Typical Applications

CD4020BPW is suitable for 6 applications: Fixed Frequency Division, Digital Clock Generation, Industrial Event Counting, Timer and Retriggerable Timing, Low-Power CMOS Logic, Frequency-Ratio Monitoring.

⚡

Fixed Frequency Division

The CD4020BPW is well suited to producing a stable divided clock from a periodic input signal. Its 14-stage ripple architecture supports multiple binary divide relationships, allowing one source clock to establish several related timing points without a programmable controller. The negative-edge trigger and -55°C to 125°C operating range are useful for industrial timing systems that require fixed CMOS logic behavior. Because the stages are ripple-connected, propagation delay accumulates from stage to stage; the circuit should therefore avoid requiring simultaneous edges from multiple outputs. The 16-pin TSSOP package also keeps the counter compact while exposing the available divided outputs for timing-control logic.

🖥️

Digital Clock Generation

A CD4020BPW can divide a system oscillator into a lower-frequency binary clock for sequential logic, sampling systems, or periodic control events. The 14-stage counter provides enough depth for coarse divider ratios, while the one-element architecture reduces the component count compared with a chain of discrete flip-flops. Negative-edge counting makes the input transition convention important during timing validation. Engineers should compare the manufacturer's maximum input frequency and propagation-delay limits against the shortest clock interval, and they should avoid treating a later ripple stage as a glitch-free synchronous phase reference without additional analysis.

🏭

Industrial Event Counting

The CD4020BPW can count recurring input events and expose binary divide stages for supervisory logic in industrial equipment. Its -55°C to 125°C operating range supports temperature-controlled equipment, while the CMOS implementation fits systems already standardized around CD4000-series logic. The counter is most appropriate when the design needs repeatable event-derived timing rather than a software-maintained count. Reset release and input conditioning should be handled so that every event produces one unambiguous count. Long traces, contact bounce, and slow input edges can affect interpretation, so external conditioning may be needed for mechanical or noisy sources.

🔧

Timer and Retriggerable Timing

CD4020BPW-based circuits can establish long timing intervals by counting oscillator periods and decoding selected binary stages. The 14-stage depth allows substantial division of a high-frequency source, which is useful in trigger, watchdog, and delay blocks where a fixed hardware timeout is desirable. Compared with a software timer, the counter continues operating without processor attention and can provide a direct divided-clock output. Timing accuracy still depends on the source oscillator and the counter's propagation behavior. The design should specify margin against the minimum valid clock pulse and avoid resetting the counter at a rate that could race with the selected decoded stage.

🧩

Low-Power CMOS Logic

The CD4020BPW is appropriate for low-power CMOS subsystems that need counting without the overhead of a programmable processor. A single counter replaces cascaded divider logic, reducing board area and component count while retaining a straightforward hardware troubleshooting path. Its 16-pin TSSOP package is compatible with compact surface-mount assemblies, and the -55°C to 125°C range covers demanding equipment environments. Low-power suitability should be evaluated at the actual clock rate and supply voltage because dynamic current and switching activity depend on operating conditions. Avoid tying unused inputs to an unknown level and follow the manufacturer guidance for unused counter stages.

📺

Frequency-Ratio Monitoring

The CD4020BPW can create a divided reference that permits a downstream circuit to compare or monitor a recurring input frequency. Binary outputs from different stages provide related divide ratios, which can be selected by surrounding logic or measurement circuitry. The single-element 14-stage architecture is useful in simple instrumentation where a dedicated programmable timer would be excessive. For accurate measurement, the input signal must remain stable enough for the counter to recognize each active edge, and the circuit should account for propagation delay when interpreting closely spaced outputs. A digital timer, microcontroller, or FPGA may be preferable when the ratio must be changed dynamically.

Recommended Products Summary

CD4020BPW Texas Instruments Used in: Fixed Frequency Division, Digital Clock Generation, Industrial Event Counting, Timer and Retriggerable Timing, Low-Power CMOS Logic, Frequency-Ratio Monitoring CD4020BPWR Tape-and-reel order configuration Used in: Fixed Frequency Division, Digital Clock Generation, Industrial Event Counting, Timer and Retriggerable Timing, Low-Power CMOS Logic, Frequency-Ratio Monitoring
What is the CD4020BPW?
The CD4020BPW is a Texas Instruments 14-stage CMOS ripple-carry binary counter and divider packaged in a 16-pin TSSOP. According to the manufacturer product page for CD4020B, it provides one counter element and increments on the negative edge of the input clock. It is intended for frequency division, binary timing generation, and general-purpose counting.
How many stages and counting elements does the CD4020BPW have?
The CD4020BPW has 14 stages and one counting element. Distributor listings identify it as a 14-bit, single-element binary counter, while the Texas Instruments product page describes the CD4020B family as a 14-stage ripple-carry counter/divider. These two descriptions refer to the same core counter function.
What clock edge triggers the CD4020BPW counter?
The CD4020BPW counts on the negative edge of the input clock. DigiKey describes the device as a negative-edge binary counter, and the Texas Instruments product page classifies CD4020B as a ripple-carry counter/divider. Confirm the clock waveform and reset sequence in the manufacturer datasheet before using a divided output as a system timing reference.
What package and temperature range are used for the CD4020BPW?
The CD4020BPW uses a 16-pin TSSOP package and is specified for an operating temperature range of -55°C to 125°C. The package is listed as 0.173 inch, or 4.40 mm, wide. The manufacturer product page provides the authoritative family information and ordering details for the CD4020B family.
Where can I download the CD4020BPW datasheet PDF?
The primary source for CD4020BPW documentation is the Texas Instruments CD4020B product page, which links the family datasheet and ordering information. A manufacturer-hosted PDF can also be accessed through the CD4020B product resources. Use the pin-description table, switching characteristics, and recommended operating conditions when assigning PCB connections.
Where is the CD4020BPW pinout?
The CD4020BPW pinout is documented in the Texas Instruments CD4020B manufacturer datasheet rather than in distributor search snippets. The exact 16-pin TSSOP pin-description table should be used to identify the clock, reset, supply, and divided-output connections. Do not infer a pin assignment from another CD4000-series counter because related devices can expose different output arrangements.
What can replace the CD4020BPW?
A true drop-in replacement for the CD4020BPW must use the same 16-pin TSSOP footprint, provide equivalent clock and reset behavior, and expose compatible divided outputs. The CD4020BPWR is a reel-packaging variant of the same TI device, while CD4020BM references generally use a different package. Neither should be represented as an independent drop-in functional replacement without qualification.
Is the CD4020BPW the same as CD4020BPWR?
CD4020BPW and CD4020BPWR are the same Texas Instruments 16-TSSOP counter offered with different order-packaging configurations. The PW designation is associated with tube packaging, whereas the BPWR designation is listed for tape-and-reel packaging. They should not be counted as separate functional alternatives because their electrical and pin-level characteristics are not an independent substitution.
Is there an STMicroelectronics equivalent for the CD4020BPW?
An STMicroelectronics CD4020BM pin-to-pin reference is identified, but the available listing does not establish the same 16-pin TSSOP package as the CD4020BPW. Because a footprint change prevents drop-in PCB replacement, verify the exact package and pinout before considering it. The CD4020BPW should be selected when the existing PCB footprint is 16-pin TSSOP.
When should I choose the CD4020BPW over a programmable counter?
Choose the CD4020BPW when a fixed divide ratio, CMOS logic operation, and a simple hardware implementation are more important than programmability. Its 14-stage ripple-carry architecture can generate divided outputs without a microcontroller, FPGA, configuration memory, or external clock controller. A programmable counter is preferable when the division ratio must be changed in software.
When should I choose a CD4020BPW drop-in alternative?
Choose a drop-in alternative only when it has the same 16-pin TSSOP footprint and matching clock, reset, supply, and output behavior. No independently sourced alternative in the cross-reference results meets that complete requirement for the exact CD4020BPW designation. For a new design, compare counter depth, operating voltage, maximum frequency, propagation delay, and temperature grade rather than relying only on the CD4020 family name.
Can the CD4020BPW be used for frequency division?
Yes, the CD4020BPW is specifically designed as a 14-stage ripple-carry binary counter and divider. It can derive divided timing signals from an external clock, with multiple binary stages supporting different divide relationships. Account for ripple propagation delay and use the manufacturer switching-characteristic limits when the divided outputs drive precision timing or phase-sensitive circuitry.
Where can I buy the CD4020BPW and check current lead time?
The current commercial status, quantity availability, and lead time should be requested through the Request a Quote form on this page. The CD4020BPW is listed by multiple distribution channels, but stock and delivery timing can change independently of the part's technical specification. Include your required quantity, packaging preference, and target delivery date in the request.
What is the price of the CD4020BPW?
The current CD4020BPW price should be requested through the Request a Quote form on this page because quote-based and distributor pricing can change with quantity and availability. The form lets buyers specify the required quantity and obtain a current offer for the exact 16-pin TSSOP device rather than relying on a stale historical price.
Is the CD4020BPW in stock?
The CD4020BPW is offered through multiple distribution channels, but current stock must be confirmed through the Request a Quote form on this page. The form is the appropriate route for checking quantity availability, lead time, and packaging requirements for the exact orderable MPN. Inventory at one channel does not guarantee allocation for a larger production order.
What are the key specifications of the CD4020BPW that engineers should know?
The CD4020BPW combines a 14-stage CMOS ripple-carry binary counter, one counting element, negative-edge triggering, a -55°C to 125°C operating range, and a 16-pin TSSOP package. According to the Texas Instruments CD4020B product page and distributor listings, its core purpose is frequency division and binary timing generation. Supply limits and dynamic timing values should be confirmed in the manufacturer datasheet.

Engineering reference data for CD4020BPW — comparison, design guidance, and compliance information.

Selection Guide

Choose the CD4020BPW when the design needs a fixed 14-stage binary divider in the 16-pin TSSOP footprint and does not require software-programmable ratios. It is particularly useful in CMOS control systems, industrial timing circuits, and clock-generation blocks that benefit from simple hardware counting across -55°C to 125°C. Choose a programmable counter or FPGA when the divider ratio must change dynamically, event counts must be read digitally, or multiple unrelated frequencies must be generated concurrently. Before substituting another device, require the same TSSOP footprint, equivalent clock and reset behavior, compatible output stages, and acceptable dynamic timing. CD4020BPWR is a packaging configuration of the same function rather than a functional improvement, while CD4020BM references may require a different footprint. For new high-speed or precision-timing designs, verify the CD4020BPW's maximum clock frequency, propagation delay, and supply-voltage limits against the actual timing budget.

Comparison with Alternatives

Parameter This Product
Manufacturer Texas Instruments
Package 16-pin TSSOP, 0.173 inch (4.40 mm) width
Counter Type Binary ripple-carry counter/divider
Number of Stages 14 stages
Number of Counter Elements 1 element
Clock Edge Negative edge
Logic Technology CMOS
Operating Temperature Range -55°C to 125°C
Packaging Tube

Design Notes

Treat the CD4020BPW as a ripple counter rather than a synchronous counter. Outputs from different stages change at different times, so decoding two nearby stages can produce short or unequal transition intervals. Decode only stages whose timing relationship is acceptable, or add a latch or synchronizer when downstream logic requires simultaneous, clean edges.

Route the clock input as a short trace and maintain a continuous ground reference beneath the TSSOP footprint. Place input conditioning or reset components near the associated pins so that ringing and slow edges do not propagate across the board. Use the manufacturer pin-description table to preserve the exact 16-pin TSSOP orientation and confirm the exposed standard orientation before assembly.

Check that the incoming clock meets the manufacturer's minimum pulse-width and transition-time requirements. A clean frequency divider still produces incorrect counts when the clock has excessive rise or fall time, double transitions, or insufficient pulse width. For noisy contacts or long wiring, add conditioning before the counter and keep the return path adjacent to the clock trace.

Design the supply path for the actual clock activity and the number of outputs being used. Dynamic current increases as switching frequency rises, even though the counter is implemented in CMOS. Keep the supply bypass network close to the device, verify the acceptable supply range in the manufacturer datasheet, and avoid introducing ground current through sensitive timing traces.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations are identified for the exact orderable MPN. Consult the current Texas Instruments product page and applicable quality documents before making a compliance determination.

Related Searches

CD4020BPW CD4020BPW datasheet CD4020BPW datasheet pdf CD4020BPW pinout Texas Instruments CD4020BPW CD4020BPW equivalent CD4020BPW replacement CD4020BPW drop-in alternative CD4020BPW vs CD4020BPWR CD4020BPW 16-TSSOP CD4020BPW frequency divider CD4020BPW counter IC CD4020BPW price CD4020BPW stock CD4020BPW application circuit

Related Components & Terms

Texas Instruments CD4020BPW CD4020BPWR CD4020BM CD4020B CMOS CD4000B series binary counter ripple-carry counter counter divider frequency divider negative-edge trigger 14-stage counter digital logic IC TSSOP-16 surface mount SMD binary timing generation industrial control clock generation operating temperature range RoHS REACH AEC-Q100
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details