Cirrus Logic Inc.

CS4341-CZZ - 24-Bit Stereo Audio DAC | Cirrus Logic

MPN: CS4341-CZZ ✗ Akhir Hidup
3 V to 3.6 V Vdss 16-pin TSSOP, 4.40 mm width Package
MOQ: 1 |

CS4341-CZZ Ringkasan

Cirrus Logic CS4341-CZZ is a 24-bit, two-channel stereo digital-to-analog converter with a maximum sampling rate of 96 kSPS, an SPI interface, and a 16-pin TSSOP package. The device accepts a 3 V to 3.6 V or 5 V supply and is designed for digital audio systems requiring a compact integrated DAC output stage.

An audio DAC is a converter that transforms digital PCM audio samples into analog voltage signals suitable for amplification, recording, or line-level output. The CS4341 belongs to the broader digital-to-analog converter family within integrated circuits and combines digital interpolation, a fourth-order delta-sigma DAC, digital de-emphasis, and switched-capacitor analog filtering in one package.

The CS4341 supports 24-bit audio at rates up to 96 kSPS and includes digital volume control. Its Popguard technology reduces output transients during power-up and power-down when the outputs are connected through external DC-blocking capacitors. This feature is useful in single-supply systems where the analog output may otherwise move away from its normal operating point during supply transitions.

The converter architecture uses a fourth-order delta-sigma stage rather than a binary-weighting or resistor-ladder DAC. This approach supports high-resolution digital audio filtering and accurate stereo reproduction while requiring external passive components for output coupling and filtering. The digital interface uses SPI signaling, and the device operates as a stereo audio converter with two output channels.

Typical uses include compact digital audio equipment, multimedia systems, audio processing modules, and powered speaker or headphone products. A practical implementation can place the CS4341 downstream of an audio codec or processor, then pass its analog outputs through DC-blocking capacitors and an output reconstruction filter before driving a low-noise amplifier.

Power-supply and layout design should prioritize a quiet analog ground path, short output traces, stable reference connections, and correct placement of the required input, output, and filter capacitors. The manufacturer datasheet should be used to assign every signal and supply pin and to confirm the recommended component values for the selected output configuration.

This product page combines the exact CS4341-CZZ package and interface details with practical guidance covering obsolete-part planning, drop-in sourcing, analog filtering, Popguard implementation, and PCB layout. These engineering notes help buyers evaluate the DAC within the wider audio signal chain rather than relying only on a basic resolution and sample-rate listing.

Alternatif penggantian untuk CS4341-CZZ — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian CS4341-CZZ (sama faktor bentuk dan footprint) — berbeda di dalam Digital De-emphasis, Package, Digital Interpolation, Lifecycle Status, Maximum Sampling Rate.

Cirrus Logic Inc.
Digital De-emphasis: Integrated
Package: 16-pin TSSOP, 4.4 mm body width
Digital Interpolation: Integrated
Bandingkan dengan CS4341-CZZ →
Cirrus Logic Inc.
Digital De-emphasis: Supported
Package: 16-pin SOIC, 3.90 mm width
Lifecycle Status: Obsolete (EOL)
Bandingkan dengan CS4341-CZZ →

CS4341-CZZR

✅ Drop-In
📦 16-TSSOP
Same CS4341 function and 16-pin TSSOP package; reel or packing suffix differs, with no identified change to the key 24-bit, 96 kSPS stereo DAC ratings

📋 Alternatif referensi (tidak dalam katalog)

CS4341-CZZ Rating Maksimal & Karakteristik Listrik

Device Type Stereo audio digital-to-analog converter
Number of Channels 2 channels
Resolusi 24 bit
Maximum Sampling Rate 96 kSPS
Architecture Fourth-order delta-sigma DAC
Digital Interface SPI
Input Supply Voltage Range 3 V to 3.6 V
5 V Operation 5 V
Rentang Suhu Kerja -10 °C to +70 °C
Paket 16-pin TSSOP, 4.40 mm width
Tipe Mounting Surface mount
Moisture Sensitivity Level MSL 3, 168 hours
Output Transient Control Popguard technology
Digital Interpolation Internal
Digital De-emphasis Internal
Analog Output Filtering Switched-capacitor filtering
Digital Volume Control Internal
Output DC Blocking External capacitors required for Popguard operation
Status Lingkungan Hidup Obsolete

CS4341-CZZ 16-pin tssop, 4.40 mm width Diamant Konfigurasi Panduan

Konfigurasi pin untuk CS4341-CZZ (16-pin tssop, 4.40 mm width pakai pakai). Komponen analog ini memiliki pin masukan, keluaran, dan pengirim daya. Lihat datasheet produsen untuk konfigurasi pin offset null, kompensasi, dan pengaktifan. Ideal untuk peralatan sinyal dan kabel penggandaran.

Diamant diagram pakai pakai 16-pin tssop, 4.40 mm width untuk CS4341-CZZ

Tidak ada data diatribut pin yang tersedia untuk CS4341-CZZ.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

CS4341-CZZ cocok untuk 6 aplikasis: Compact Digital Audio Player, Multimedia Speaker Interface, Audio Processing Module, Digital Recording Output, Powered Headphone Product, Legacy Audio Equipment Repair.

🎧

Compact Digital Audio Player

The CS4341-CZZ suits compact digital audio players because it combines 24-bit stereo conversion, a maximum sampling rate of 96 kSPS, and an SPI interface in a 16-pin TSSOP package. Place it between the digital audio controller and the output reconstruction network to produce an analog stereo signal. The device's internal interpolation, de-emphasis, and switched-capacitor filtering reduce the number of digital functions the source controller must implement. Confirm the controller's clocking, data format, and master/slave behavior against the manufacturer interface diagrams.

🔊

Multimedia Speaker Interface

The CS4341-CZZ can provide the analog stereo input for a powered-speaker or multimedia monitor design. Its 24-bit conversion and 96 kSPS maximum rate support high-resolution source material, while Popguard technology helps control startup and shutdown transients when external DC-blocking capacitors are installed. The analog outputs still require the recommended reconstruction filter and a power amplifier selected for the target impedance. Validate channel synchronization, output DC offset, and audible transients during power sequencing.

🔧

Audio Processing Module

The CS4341-CZZ is suitable for a modular audio-processing board that accepts digital PCM streams and provides stereo analog outputs. Its SPI interface and compact 16-pin TSSOP package simplify integration with dedicated audio processors, while internal digital interpolation and de-emphasis support standard digital playback pipelines. Use separate analog and digital ground-return planning around the converter, and place the output capacitors and reconstruction components close to the device. Validate all timing assumptions at the maximum 96 kSPS operating rate.

💾

Digital Recording Output

A digital recording product can use the CS4341-CZZ as a monitoring or auxiliary stereo output converter when a line-level analog destination is required. The 24-bit DAC and 96 kSPS ceiling support high-resolution playback monitoring, while the SPI interface allows a recorder controller to configure audio data and volume. Design the analog path for the destination's input impedance and allow sufficient output-filter and amplifier headroom. Confirm that ground offsets between the converter and recording circuitry remain within the system noise and ground-error budget.

🎧

Powered Headphone Product

The CS4341-CZZ can serve as the converter stage in a powered-headphone product requiring a small stereo DAC. Its 24-bit resolution and 96 kSPS support preserve high-resolution source data, while Popguard reduces supply-transition transients when the recommended DC-blocking capacitors are used. A separate low-noise headphone amplifier remains necessary to set output impedance and current capability. Select passive and filter values from the manufacturer reference circuit, then verify channel balance and startup behavior with the intended headphones connected.

🛠️

Legacy Audio Equipment Repair

The obsolete CS4341-CZZ is particularly relevant to repairing or sustaining older digital audio equipment that used the CS4341 in a 16-pin TSSOP footprint. Matching the existing footprint allows an engineer to retain the established PCB and signal architecture when replacing the original converter. Before installation, compare the exact ordering suffix, pin assignments, supply requirements, and external component values with the circuit being repaired. After replacement, check startup transients, digital clocking, stereo synchronization, and output DC offset across repeated power cycles.

What is the CS4341-CZZ?
The CS4341-CZZ is a two-channel, 24-bit stereo audio DAC with a maximum sampling rate of 96 kSPS and an SPI interface. It combines digital interpolation, a fourth-order delta-sigma converter, digital de-emphasis, and switched-capacitor analog filtering in a 16-pin TSSOP package. The manufacturer datasheet describes it as a complete stereo digital-to-analog system for compact digital audio equipment.
What are the key specifications of CS4341-CZZ that engineers should know?
The CS4341-CZZ provides 24-bit resolution, two stereo output channels, a maximum sampling rate of 96 kSPS, and an SPI interface. It operates from a 3 V to 3.6 V supply or at 5 V and is packaged in a 16-pin TSSOP. According to the manufacturer datasheet, Popguard technology is included to minimize output transients during power-up and power-down.
Is the CS4341-CZZ currently active?
No, the CS4341-CZZ is listed as obsolete. This means new-production demand is limited and replacement planning should account for possible extended sourcing lead times. The manufacturer datasheet remains the primary technical reference, while the Request a Quote form on this page should be used to confirm current availability, lot traceability, and delivery timing.
Where can I download the CS4341-CZZ datasheet PDF?
The CS4341-CZZ datasheet PDF is available through the official technical document link on this page. It covers the fourth-order delta-sigma architecture, SPI interface, Popguard operation, electrical characteristics, pin descriptions, and recommended application circuits. Use the manufacturer pin-description table when assigning PCB nets and selecting external output-filter and DC-blocking components.
Where can I find the CS4341-CZZ pinout?
The CS4341-CZZ pinout is in the pin-description table of the manufacturer datasheet. The device uses a 16-pin TSSOP package, but individual terminal names are not reproduced on this page to avoid transcription errors. Use the datasheet diagram to distinguish digital control signals, serial audio data, clock and latch inputs, supply pins, ground connections, and analog outputs.
What is the supply voltage range of the CS4341-CZZ?
The CS4341-CZZ supports a 3 V to 3.6 V supply or 5 V operation. The exact minimum and maximum ratings, plus the power-supply sequencing conditions, are defined in the manufacturer datasheet. For layout, treat the analog supply and ground pins as dedicated paths and avoid routing digital return currents through the analog output reference.
How does Popguard reduce clicks in a CS4341-CZZ design?
Popguard technology reduces output transients during power-up and power-down. According to the manufacturer datasheet, it is used with external DC-blocking capacitors in series with the audio outputs to minimize transients commonly produced by single-ended, single-supply converters. Select the capacitor values from the Popguard application guidance and verify startup behavior on the finished board.
Is the CS4341-CZZ suitable for a 96 kHz stereo audio system?
Yes, the CS4341-CZZ is rated for 24-bit stereo operation at up to 96 kSPS. Its internal fourth-order delta-sigma DAC, digital interpolation, de-emphasis, and switched-capacitor filtering support high-resolution digital audio conversion. The system clock, serial interface, output reconstruction network, and analog amplifier must still be designed for the intended sample rate and output bandwidth.
What is the best drop-in replacement for CS4341-CZZ?
The CS4341-CZZR is the closest documented same-family ordering option because it retains the CS4341 function in a 16-pin TSSOP package. It differs primarily in reel or packing presentation and should not be treated as a new silicon qualification. Confirm the suffix, pinout, temperature grade, and assembly orientation before using it as a procurement alternative.
Can CS4341-CZZR replace CS4341-CZZ?
The CS4341-CZZR can generally serve as a procurement replacement for CS4341-CZZ when the intended assembly method matches, because both are identified as the CS4341 in a 16-pin TSSOP package. The suffix distinction must still be reviewed against the manufacturer ordering table. No second-source alternative with independently verified pin compatibility was identified in the available cross-reference results.
What can replace an obsolete CS4341-CZZ?
The nearest documented replacement is the CS4341-CZZR, which retains the same CS4341 family and 16-pin TSSOP format. For long-term redesigns, engineers should also evaluate newer audio DACs, but those may require different package, interface, voltage, filtering, or software changes. Use the Request a Quote form on this page to check sourcing status for the exact suffix.
When should I choose CS4341-CZZ over a newer stereo DAC?
Choose CS4341-CZZ when maintaining an existing design requires the established 24-bit, 96 kSPS stereo DAC, SPI interface, and 16-pin TSSOP footprint. A newer DAC is generally preferable for a fresh design when it offers lower power, smaller packaging, improved clocking, a different digital interface, or a broader supply range. Any conversion should be reviewed for pin, protocol, filter, and firmware changes.
Is CS4341-CZZ suitable for headphone and powered-speaker outputs?
The CS4341-CZZ can provide the analog stereo signal for a headphone or powered-speaker design when followed by a suitable output amplifier and reconstruction filter. It is not itself a headphone or speaker driver. The amplifier must be chosen for the required output impedance, current, bandwidth, distortion, noise, and supply level.
How should the CS4341-CZZ be placed on a PCB?
Place the CS4341-CZZ close to its digital source and analog output network, with short and symmetric routes for stereo signals. Keep supply and ground planes continuous, connect decoupling capacitors at the relevant pins, and route analog outputs away from high-current switching nodes. Follow the manufacturer layout example for component placement and ground partitioning.
Where can I request a quote and lead time for CS4341-CZZ?
Use the Request a Quote form on this page to request the current price, stock position, minimum order quantity, and lead time for CS4341-CZZ. Because the device is obsolete, availability can vary by remaining factory lot, traceable inventory, and assembly requirements. State the required suffix, quantity, date code, and certification needs with the request.

Data referensi engineering untuk CS4341-CZZ — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the CS4341-CZZ when maintaining an existing design requires the established Cirrus Logic 24-bit stereo DAC with a 96 kSPS maximum rate, SPI interface, and 16-pin TSSOP footprint. The CS4341-CZZR is the closest documented procurement option because it retains the same family and package, although the suffix and packing requirements must be checked before substitution. For a new design, evaluate newer stereo DACs when they offer a smaller package, lower power consumption, improved clocking, a different digital interface, or a broader supply range. Such alternatives are not automatically drop-in replacements. Any redesign should compare pin assignments, interface protocol, digital filters, analog reconstruction network, Popguard implementation, output DC blocking, and amplifier interface. For repair work, preserve the existing footprint and external component network, verify the manufacturer timing and application diagrams, and validate startup transients and stereo synchronization on the completed board.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini CS4341-CZZR
Brand Cirrus Logic Cirrus Logic
Package 16-TSSOP 16-TSSOP - same
Device Type Stereo audio DAC Stereo audio DAC
Resolution 24 bit 24 bit
Maximum Sampling Rate 96 kSPS 96 kSPS
Channel Count 2 channels 2 channels
Digital Interface SPI SPI
Supply Voltage 3 V to 3.6 V or 5 V 3 V to 3.6 V or 5 V
DAC Architecture Fourth-order delta-sigma Fourth-order delta-sigma
Operating Temperature -10 °C to +70 °C -10 °C to +70 °C

Diferensiator Kunci

  • High-resolution stereo conversion in a compact package (vsCS4341-CZZR)
  • Integrated digital audio functions reduce external controller burden (vsCS4341-CZZR)
  • Popguard support addresses supply-transition transients (vsCS4341-CZZR)
  • Exact-footprint continuity for existing designs (vsNewer stereo DAC families)

Catatan Desain

Keep the CS4341-CZZ close to the controller that supplies serial audio data and place the recommended input and output capacitors near their associated pins. Route the two analog output channels with similar geometry and symmetry to minimize channel-to-channel timing and gain differences. Keep switching-regulator, clock, and high-current output-amplifier nodes away from the analog output traces.

Do not treat Popguard as a substitute for external DC blocking. The manufacturer datasheet specifically describes using Popguard with capacitors in series with the audio outputs to minimize startup and shutdown transients in single-supply systems. Use the reference circuit's capacitor values and verify offset, channel balance, and audible transients across repeated power cycles.

Provide a quiet supply and local decoupling at the CS4341-CZZ. Follow the manufacturer pin table to identify the analog and digital supply or ground connections, and avoid sharing high-return-current paths with analog output reference currents. If the digital source and converter use separate regulators, account for startup order and ensure the controller does not begin transmitting before the DAC supply is valid.

Review SPI clock timing, data setup and hold requirements, and the serial data format at the maximum 96 kSPS sample rate. The CS4341-CZZ is a digital audio converter, so a nominal matching clock rate is not sufficient if edge timing, polarity, or control sequencing differs. Use the manufacturer timing diagrams and test with the intended source controller.

For repair and substitution work, compare the exact ordering suffix and external component network rather than relying on the base CS4341 family name. The CS4341-CZZR is the closest documented ordering option in the same 16-pin TSSOP format, but suffix and packing differences must match the intended assembly process. Confirm pin assignments from the manufacturer datasheet before soldering.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The device is an obsolete consumer audio DAC; no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was established.

Data disahkan pada: 2026-11-16 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

CS4341-CZZ datasheet CS4341-CZZ pinout CS4341-CZZ datasheet pdf CS4341-CZZ equivalent CS4341-CZZ replacement CS4341-CZZ cross reference Cirrus Logic CS4341-CZZ CS4341-CZZ 24 bit stereo DAC CS4341-CZZ 96 kSPS CS4341-CZZ SPI interface CS4341 TSSOP pinout CS4341 audio DAC application circuit CS4341-CZZ price CS4341-CZZ stock CS4341-CZZ vs CS4341-CZZR

Komponen dan Istilah Terkait

Cirrus Logic CS4341-CZZ CS4341-CZZR audio DAC digital-to-analog converter stereo DAC delta-sigma DAC fourth-order delta-sigma SPI PCM audio digital interpolation digital de-emphasis switched-capacitor filter Popguard technology DC-blocking capacitor digital volume control 24-bit resolution 96 kSPS sampling rate 16-pin TSSOP TSSOP package family surface-mount package single-supply audio audio reconstruction filter power management IC semiconductor
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ