CS4341-CZZ - 24-Bit Stereo Audio DAC | Cirrus Logic
MPN: CS4341-CZZ ✗ پایان تولیدCS4341-CZZ نمای کلی
An audio DAC is a converter that transforms digital PCM audio samples into analog voltage signals suitable for amplification, recording, or line-level output. The CS4341 belongs to the broader digital-to-analog converter family within integrated circuits and combines digital interpolation, a fourth-order delta-sigma DAC, digital de-emphasis, and switched-capacitor analog filtering in one package.
The CS4341 supports 24-bit audio at rates up to 96 kSPS and includes digital volume control. Its Popguard technology reduces output transients during power-up and power-down when the outputs are connected through external DC-blocking capacitors. This feature is useful in single-supply systems where the analog output may otherwise move away from its normal operating point during supply transitions.
The converter architecture uses a fourth-order delta-sigma stage rather than a binary-weighting or resistor-ladder DAC. This approach supports high-resolution digital audio filtering and accurate stereo reproduction while requiring external passive components for output coupling and filtering. The digital interface uses SPI signaling, and the device operates as a stereo audio converter with two output channels.
Typical uses include compact digital audio equipment, multimedia systems, audio processing modules, and powered speaker or headphone products. A practical implementation can place the CS4341 downstream of an audio codec or processor, then pass its analog outputs through DC-blocking capacitors and an output reconstruction filter before driving a low-noise amplifier.
Power-supply and layout design should prioritize a quiet analog ground path, short output traces, stable reference connections, and correct placement of the required input, output, and filter capacitors. The manufacturer datasheet should be used to assign every signal and supply pin and to confirm the recommended component values for the selected output configuration.
This product page combines the exact CS4341-CZZ package and interface details with practical guidance covering obsolete-part planning, drop-in sourcing, analog filtering, Popguard implementation, and PCB layout. These engineering notes help buyers evaluate the DAC within the wider audio signal chain rather than relying only on a basic resolution and sample-rate listing.
جایگزینهای drop-in برای CS4341-CZZ — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای CS4341-CZZ (همان فرمفاکتور و فوتپرینت) — متفاوت در Digital De-emphasis, Package, Digital Interpolation, Lifecycle Status, Maximum Sampling Rate.
CS4341-CZZR
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
CS4341-CZZ حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | Stereo audio digital-to-analog converter |
| Number of Channels | 2 channels |
| رزولوشن | 24 bit |
| Maximum Sampling Rate | 96 kSPS |
| Architecture | Fourth-order delta-sigma DAC |
| Digital Interface | SPI |
| Input Supply Voltage Range | 3 V to 3.6 V |
| 5 V Operation | 5 V |
| محدوده دمای کاری | -10 °C to +70 °C |
| بستهبندی | 16-pin TSSOP, 4.40 mm width |
| نوع نصب | Surface mount |
| Moisture Sensitivity Level | MSL 3, 168 hours |
| Output Transient Control | Popguard technology |
| Digital Interpolation | Internal |
| Digital De-emphasis | Internal |
| Analog Output Filtering | Switched-capacitor filtering |
| Digital Volume Control | Internal |
| Output DC Blocking | External capacitors required for Popguard operation |
| وضعیت چرخه عمر | Obsolete |
راهنمای پیکربندی پین CS4341-CZZ 16-pin tssop, 4.40 mm width
پیکربندی پین برای CS4341-CZZ (پکیج 16-pin tssop, 4.40 mm width). این قطعه آنالوگ دارای پینهای ورودی، خروجی و تغذیه است. برای پیکربندیهای پین offset null، جبرانسازی و فعالسازی به دیتاشیت سازنده مراجعه کنید. ایدهآل برای مدارهای شرطیسازی سیگنال و تقویتکننده.
داده پینآوت تفصیلی موجود نیست برای CS4341-CZZ.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
CS4341-CZZ مناسب است برای 6 کاربردs: Compact Digital Audio Player, Multimedia Speaker Interface, Audio Processing Module, Digital Recording Output, Powered Headphone Product, Legacy Audio Equipment Repair.
Compact Digital Audio Player
The CS4341-CZZ suits compact digital audio players because it combines 24-bit stereo conversion, a maximum sampling rate of 96 kSPS, and an SPI interface in a 16-pin TSSOP package. Place it between the digital audio controller and the output reconstruction network to produce an analog stereo signal. The device's internal interpolation, de-emphasis, and switched-capacitor filtering reduce the number of digital functions the source controller must implement. Confirm the controller's clocking, data format, and master/slave behavior against the manufacturer interface diagrams.
پیشنهادی
Multimedia Speaker Interface
The CS4341-CZZ can provide the analog stereo input for a powered-speaker or multimedia monitor design. Its 24-bit conversion and 96 kSPS maximum rate support high-resolution source material, while Popguard technology helps control startup and shutdown transients when external DC-blocking capacitors are installed. The analog outputs still require the recommended reconstruction filter and a power amplifier selected for the target impedance. Validate channel synchronization, output DC offset, and audible transients during power sequencing.
پیشنهادی
Audio Processing Module
The CS4341-CZZ is suitable for a modular audio-processing board that accepts digital PCM streams and provides stereo analog outputs. Its SPI interface and compact 16-pin TSSOP package simplify integration with dedicated audio processors, while internal digital interpolation and de-emphasis support standard digital playback pipelines. Use separate analog and digital ground-return planning around the converter, and place the output capacitors and reconstruction components close to the device. Validate all timing assumptions at the maximum 96 kSPS operating rate.
پیشنهادی
Digital Recording Output
A digital recording product can use the CS4341-CZZ as a monitoring or auxiliary stereo output converter when a line-level analog destination is required. The 24-bit DAC and 96 kSPS ceiling support high-resolution playback monitoring, while the SPI interface allows a recorder controller to configure audio data and volume. Design the analog path for the destination's input impedance and allow sufficient output-filter and amplifier headroom. Confirm that ground offsets between the converter and recording circuitry remain within the system noise and ground-error budget.
پیشنهادی
Powered Headphone Product
The CS4341-CZZ can serve as the converter stage in a powered-headphone product requiring a small stereo DAC. Its 24-bit resolution and 96 kSPS support preserve high-resolution source data, while Popguard reduces supply-transition transients when the recommended DC-blocking capacitors are used. A separate low-noise headphone amplifier remains necessary to set output impedance and current capability. Select passive and filter values from the manufacturer reference circuit, then verify channel balance and startup behavior with the intended headphones connected.
پیشنهادی
Legacy Audio Equipment Repair
The obsolete CS4341-CZZ is particularly relevant to repairing or sustaining older digital audio equipment that used the CS4341 in a 16-pin TSSOP footprint. Matching the existing footprint allows an engineer to retain the established PCB and signal architecture when replacing the original converter. Before installation, compare the exact ordering suffix, pin assignments, supply requirements, and external component values with the circuit being repaired. After replacement, check startup transients, digital clocking, stereo synchronization, and output DC offset across repeated power cycles.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای CS4341-CZZ — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | CS4341-CZZR |
|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic |
| Package | 16-TSSOP | 16-TSSOP - same |
| Device Type | Stereo audio DAC | Stereo audio DAC |
| Resolution | 24 bit | 24 bit |
| Maximum Sampling Rate | 96 kSPS | 96 kSPS |
| Channel Count | 2 channels | 2 channels |
| Digital Interface | SPI | SPI |
| Supply Voltage | 3 V to 3.6 V or 5 V | 3 V to 3.6 V or 5 V |
| DAC Architecture | Fourth-order delta-sigma | Fourth-order delta-sigma |
| Operating Temperature | -10 °C to +70 °C | -10 °C to +70 °C |
تفاوتهای کلیدی
- High-resolution stereo conversion in a compact package (در مقابلCS4341-CZZR)
- Integrated digital audio functions reduce external controller burden (در مقابلCS4341-CZZR)
- Popguard support addresses supply-transition transients (در مقابلCS4341-CZZR)
- Exact-footprint continuity for existing designs (در مقابلNewer stereo DAC families)
یادداشتهای طراحی
Keep the CS4341-CZZ close to the controller that supplies serial audio data and place the recommended input and output capacitors near their associated pins. Route the two analog output channels with similar geometry and symmetry to minimize channel-to-channel timing and gain differences. Keep switching-regulator, clock, and high-current output-amplifier nodes away from the analog output traces.
Do not treat Popguard as a substitute for external DC blocking. The manufacturer datasheet specifically describes using Popguard with capacitors in series with the audio outputs to minimize startup and shutdown transients in single-supply systems. Use the reference circuit's capacitor values and verify offset, channel balance, and audible transients across repeated power cycles.
Provide a quiet supply and local decoupling at the CS4341-CZZ. Follow the manufacturer pin table to identify the analog and digital supply or ground connections, and avoid sharing high-return-current paths with analog output reference currents. If the digital source and converter use separate regulators, account for startup order and ensure the controller does not begin transmitting before the DAC supply is valid.
Review SPI clock timing, data setup and hold requirements, and the serial data format at the maximum 96 kSPS sample rate. The CS4341-CZZ is a digital audio converter, so a nominal matching clock rate is not sufficient if edge timing, polarity, or control sequencing differs. Use the manufacturer timing diagrams and test with the intended source controller.
For repair and substitution work, compare the exact ordering suffix and external component network rather than relying on the base CS4341 family name. The CS4341-CZZR is the closest documented ordering option in the same 16-pin TSSOP format, but suffix and packing differences must match the intended assembly process. Confirm pin assignments from the manufacturer datasheet before soldering.
اطلاعات انطباق
The device is an obsolete consumer audio DAC; no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was established.