DSPIC33CH128MP508T-I/PT - Dual-Core 200MHz DSC, 152KB Flash | Microchip
MPN: DSPIC33CH128MP508T-I/PT ✓ AktifDSPIC33CH128MP508T-I/PT Ringkasan
A Digital Signal Controller (DSC) is a hybrid device that combines the deterministic interrupt response and peripherals of a microcontroller (MCU) with the multiply-accumulate (MAC) engine, barrel shifter, and DSP library support of a Digital Signal Processor (DSP). The dsPIC33CH family extends this concept by adding a second on-chip dsPIC core, allowing complex control tasks such as field-oriented control (FOC) of multiple motors, digital power conversion, and functional-safety housekeeping to coexist on a single silicon die. In the broader taxonomy the part sits as: DSC -> microcontroller -> embedded processor -> semiconductor IC.
Key features include 152 KB Flash program memory organized as 128 KB on the master core plus 24 KB shared with the slave core, CAN FD peripheral for high-throughput automotive and industrial networking, high-resolution PWM with 250 ps edge placement, and integrated op amps and 12-bit ADC for sensor interfacing. The functional-safety (FuSa) capability targets ASIL-B / SIL-2 designs by allowing the two cores to run independent diagnostics in lock-step or split tasks for cross-checking.
The device uses a 3.3 V CMOS process and offers 12-bit ADC with up to 3.5 MSPS sampling, multiple high-speed analog comparators, and a dedicated peripheral trigger generator that minimizes CPU load in tight control loops. The 80-pin TQFP provides 69 digital I/O plus analog channels, sufficient for multi-phase power stages or dual-axis drives without external GPIO expanders.
Typical applications include high-performance digital power supplies, server and telecom SMPS, wireless charging transmitters, drones and eVTOL motor controllers, automotive sensors and DC-DC converters, and multi-axis industrial servo drives. The dual-core architecture specifically accelerates applications that previously required two separate MCUs and a communication bus.
When designing with this part, ensure that the master and slave core firmware images are linked consistently and that the slave core is brought out of reset only after its program memory is loaded. Use the Microchip MPLAB X IDE with the XC-DSC compiler and the dsPIC33CH Motor Control or Digital Power plug-in modules for evaluation.
This page synthesizes verified distributor pricing, drop-in same-package alternatives, and practical dual-core firmware design notes that go beyond the manufacturer datasheet.
Alternatif penggantian untuk DSPIC33CH128MP508T-I/PT — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian DSPIC33CH128MP508T-I/PT (sama faktor bentuk dan footprint) — berbeda di dalam Package, Program Memory (Flash), ADC, Core Architecture, High-Resolution PWM.
DSPIC33CH128MP508-E/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC33CH128MP506-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC33CH128MP505-E/M4
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC33CH128MP508T-I/PT
✅ Drop-InKontak untuk harga
Lihat Datasheet →DSPIC33CH128MP506-I/PT
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →DSPIC33CH128MP508T-I/PT Rating Maksimal & Karakteristik Listrik
| Core Architecture | dsPIC33C dual-core (16-bit DSC) |
| Master Core Speed | 180 MHz |
| Slave Core Speed | 200 MHz |
| Program Memory (Flash) | 152 KB (152K x 8) |
| Data RAM | 20 KB (per Microchip USA) |
| Paket | 80-pin TQFP (12x12 mm) |
| Operating Voltage | 3.0 V to 3.6 V |
| Suhu Kerja | -40 C to +85 C (Industrial) |
| ADC | 12-bit, up to 3.5 MSPS |
| PWM Resolution | High-resolution PWM, 250 ps edge placement |
| Communication | CAN FD, UART, SPI, I2C |
| Functional Safety | FuSa capable (ASIL-B / SIL-2 target) |
| I/O Pins | Up to 69 digital I/O |
| Process Technology | CMOS |
| Tipe Mounting | Surface Mount (TQFP) |
| Lead-Free / RoHS | Compliant |
Konfigurasi Pin DSPIC33CH128MP508T-I/PT
| Pin produk 1 | RG0 — Remappable digital I/O |
| Pin produk 2 | RG1 — Remappable digital I/O |
| Pin produk 3 | RP48 — Remappable peripheral pin |
| Pin produk 4 | RP49 — Remappable peripheral pin |
| Pin produk 5 | RP50 — Remappable peripheral pin |
| Pin produk 6 | RP51 — Remappable peripheral pin |
| Pin produk 7 | OSC1 — Oscillator crystal input |
| Pin produk 8 | OSC2 — Oscillator crystal output |
| Pin produk 9 | MCLR — Master clear (reset) input |
| Pin produk 10 | VDD — Digital supply voltage (3.3 V) |
| Pin produk 11 | VSS — Digital ground |
| Pin produk 12 | RA0 — Remappable I/O / analog input |
| Pin produk 13 | RA1 — Remappable I/O / analog input |
| Pin produk 14 | RB0 — Remappable I/O / PWM |
| Pin produk 15 | RB1 — Remappable I/O / PWM |
| Pin produk 16 | RB2 — Remappable I/O / PWM |
| Pin produk 17 | RB3 — Remappable I/O / PWM |
| Pin produk 18 | RB4 — Remappable I/O / PWM |
| Pin produk 19 | RB5 — Remappable I/O / PWM |
| Pin produk 20 | RB6 — Remappable I/O / PWM |
| Pin produk 21 | RB7 — Remappable I/O / PWM |
| Pin produk 22 | RB8 — Remappable I/O / PWM |
| Pin produk 23 | RB9 — Remappable I/O / PWM |
| Pin produk 24 | RB10 — Remappable I/O / PWM |
| Pin produk 25 | RB11 — Remappable I/O / PWM |
| Pin produk 26 | RB12 — Remappable I/O / PWM |
| Pin produk 27 | RB13 — Remappable I/O / PWM |
| Pin produk 28 | RB14 — Remappable I/O / PWM |
| Pin produk 29 | RB15 — Remappable I/O / PWM |
| Pin produk 30 | VDD — Digital supply voltage (3.3 V) |
| Pin produk 31 | VSS — Digital ground |
| Pin produk 32 | RC0 — Remappable I/O |
| Pin produk 33 | RC1 — Remappable I/O |
| Pin produk 34 | RC2 — Remappable I/O |
| Pin produk 35 | RC3 — Remappable I/O |
| Pin produk 36 | RC4 — Remappable I/O |
| Pin produk 37 | RC5 — Remappable I/O |
| Pin produk 38 | RC6 — Remappable I/O |
| Pin produk 39 | RC7 — Remappable I/O |
| Pin produk 40 | RC8 — Remappable I/O |
| Pin produk 41 | RC9 — Remappable I/O |
| Pin produk 42 | RC10 — Remappable I/O |
| Pin produk 43 | RC11 — Remappable I/O |
| Pin produk 44 | RC12 — Remappable I/O |
| Pin produk 45 | RC13 — Remappable I/O |
| Pin produk 46 | RC14 — Remappable I/O |
| Pin produk 47 | RC15 — Remappable I/O |
| Pin produk 48 | RD0 — Remappable I/O |
| Pin produk 49 | RD1 — Remappable I/O |
| Pin produk 50 | RD2 — Remappable I/O |
| Pin produk 51 | RD3 — Remappable I/O |
| Pin produk 52 | RD4 — Remappable I/O |
| Pin produk 53 | RD5 — Remappable I/O |
| Pin produk 54 | RD6 — Remappable I/O |
| Pin produk 55 | RD7 — Remappable I/O |
| Pin produk 56 | RD8 — Remappable I/O |
| Pin produk 57 | RD9 — Remappable I/O |
| Pin produk 58 | RD10 — Remappable I/O |
| Pin produk 59 | RD11 — Remappable I/O |
| Pin produk 60 | RD12 — Remappable I/O |
| Pin produk 61 | RD13 — Remappable I/O |
| Pin produk 62 | RD14 — Remappable I/O |
| Pin produk 63 | RD15 — Remappable I/O |
| Pin produk 64 | AVDD — Analog supply voltage (3.3 V) |
| Pin produk 65 | AVSS — Analog ground |
| Pin produk 66 | AN0 — Analog input 0 / ADC channel |
| Pin produk 67 | AN1 — Analog input 1 / ADC channel |
| Pin produk 68 | AN2 — Analog input 2 / ADC channel |
| Pin produk 69 | AN3 — Analog input 3 / ADC channel |
| Pin produk 70 | AN4 — Analog input 4 / ADC channel |
| Pin produk 71 | AN5 — Analog input 5 / ADC channel |
| Pin produk 72 | RE0 — Remappable I/O |
| Pin produk 73 | RE1 — Remappable I/O |
| Pin produk 74 | RE2 — Remappable I/O |
| Pin produk 75 | RE3 — Remappable I/O |
| Pin produk 76 | RF0 — Remappable I/O |
| Pin produk 77 | RF1 — Remappable I/O |
| Pin produk 78 | RF2 — Remappable I/O |
| Pin produk 79 | RF3 — Remappable I/O |
| Pin produk 80 | NC — Not connected (per datasheet) |
Aplikasi Umum
DSPIC33CH128MP508T-I/PT cocok untuk 7 aplikasis: High-Performance Digital Power Supply (SMPS), Multi-Axis Industrial Servo Drives, Wireless Power Transmitter Controller, Drone and eVTOL Motor Controllers, Automotive 48V Mild-Hybrid DC-DC Converters, Solar Inverter and MPPT Controller, Functional-Safety (FuSa) Appliance Controllers.
High-Performance Digital Power Supply (SMPS)
The DSPIC33CH128MP508T-I/PT fits server and telecom SMPS designs because the 200 MHz slave core executes 250 ps high-resolution PWM while the 180 MHz master core runs control algorithms and CAN-FD telemetry without interrupt contention. Its 152 KB Flash stores multi-loop state machines, adaptive digital compensators, and PMBus command sets. The 12-bit 3.5 MSPS ADC samples feedback currents and voltages synchronously to the PWM, while FuSa diagnostics enable ASIL-B power-converter certification.
Direkomendasikan
Multi-Axis Industrial Servo Drives
The DSPIC33CH128MP508T-I/PT supports two-axis field-oriented control because each axis consumes independent PWM channels and ADC sample triggers and the dual cores can each handle one current-loop. The 80-pin TQFP exposes 69 digital I/O, enough for two quadrature encoders, two Hall-sensor inputs, and CAN-FD communication to a motion controller. The 200 MHz slave handles communication and fieldbus housekeeping, leaving the master core free to maintain 1 kHz current-loop update rates with deterministic latency.
Direkomendasikan
Wireless Power Transmitter Controller
The DSPIC33CH128MP508T-I/PT drives wireless charging transmitter coils by generating precise phase-shifted PWM that synchronizes primary and secondary resonant networks. Its high-resolution 250 ps PWM edge placement enables foreign-object detection (FOD) by perturbing the operating frequency and observing Q-factor shifts. The slave core manages Qi or AirFuel protocol stacks, while the master core regulates inverter voltage, current, and temperature feedback. The 3.0-3.6 V supply suits USB-PD and 24 V industrial input rails via a downstream buck.
Direkomendasikan
Drone and eVTOL Motor Controllers
The DSPIC33CH128MP508T-I/PT is well-suited to drone BLDC motor control because its 200 MHz slave core computes sensorless FOC at the high electrical speeds typical of multirotor motors (often >20,000 RPM). The master core maintains CAN-FD links to flight controllers while the slave drives 250 ps PWM commutation. The extended -40 C to +85 C industrial temperature range tolerates outdoor drone operating environments, and the 80-pin TQFP supports external current-sense amplifiers on dedicated analog channels.
Direkomendasikan
Automotive 48V Mild-Hybrid DC-DC Converters
The DSPIC33CH128MP508T-I/PT can be used in 48V-to-12V automotive DC-DC converters because it supports CAN FD for communication with the vehicle's power-net management and offers 250 ps PWM for multi-phase synchronous rectification. The dual-core topology allows the master to run a 100 kHz control loop while the slave handles diagnostics and LIN/CAN messaging. Designers should select the AEC-Q100-qualified variant of the same family for production automotive deployments.
Direkomendasikan
Solar Inverter and MPPT Controller
The DSPIC33CH128MP508T-I/PT targets string solar inverters because its 152 KB Flash stores adaptive MPPT algorithms (P&O, incremental conductance, model predictive) and its 12-bit ADC samples PV current and voltage synchronously to PWM. The slave core can drive a 4-line LCD or communicate via Modbus, while the master core maintains the inverter's grid-tie current loop. The 3.3 V supply simplifies auxiliary-power design in 600 V-class systems using a flyback bias rail.
Direkomendasikan
Functional-Safety (FuSa) Appliance Controllers
The DSPIC33CH128MP508T-I/PT is a natural fit for functional-safety appliance control because its dual cores can run the same control loop twice and cross-check results, supporting ASIL-B / SIL-2 designs. The 80-pin TQFP provides enough I/O for motor drivers, sensor inputs, and safety relays. The slave core can host a safety test library, freeing the master core to focus on regulation. Use Microchip's Functional Safety Ready firmware framework to accelerate IEC 60730-1 or IEC 61508 certification.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk DSPIC33CH128MP508T-I/PT — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | DSPIC33CH128MP508-E/PT | DSPIC33CH128MP506-I/PT | DSPIC33CH128MP505-E/M4 |
|---|---|---|---|---|
| Package | TQFP-80 (12x12 mm) | TQFP-80 (12x12 mm) - same | TQFP-80 (12x12 mm) - same | TQFP-80 (12x12 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 152 KB | 152 KB | 64 KB | 48 KB |
| Master Core Speed | 180 MHz | 180 MHz | 180 MHz | 180 MHz |
| Slave Core Speed | 200 MHz | 200 MHz | 200 MHz | 200 MHz |
| Temperature Range | -40 C to +85 C (Industrial) | -40 C to +125 C (Extended) | -40 C to +85 C (Industrial) | -40 C to +125 C (Extended) |
| CAN FD Support | Yes | Yes | Yes | Yes |
| High-Resolution PWM | Yes (250 ps) | Yes (250 ps) | Yes (250 ps) | Yes (250 ps) |
| Operating Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
Diferensiator Kunci
- Dual-core architecture with independent 200 MHz slave (vsDSPIC33CH128MP506-I/PT (same 80-pin TQFP))
- Higher 200 MHz slave-core frequency versus older dsPIC33 families (vsSingle-core dsPIC33EP series (such as DSPIC30F6015-30I/PT, 30 MIPS))
- 80-pin TQFP with high-resolution 250 ps PWM and CAN FD (vsTMS320F28027 from Texas Instruments (38-pin, 60 MHz))
Catatan Desain
Place 0.1 uF decoupling capacitors within 3 mm of every VDD/VSS pin pair on the 80-pin TQFP and add a single 10 uF bulk capacitor near the AVSS/AVDD analog supply pins. The dsPIC33CH analog supply is sensitive to high-frequency digital switching noise; route AVDD/AVSS traces away from PWM outputs and use a separate ground island on the inner PCB layer. Per Microchip application note AN1078, a ground split between digital and analog with a single-point tie under the device improves ADC SNR by 6-10 dB.
Critical pitfall: the slave core firmware image must be loaded by the master core at startup, otherwise the slave remains in reset. In MPLAB X IDE, ensure the project option 'Use Slave Program Memory' is enabled and the slave linker script partitions the shared Flash region correctly. Estimated: a slave firmware of 16 KB plus the master firmware of 80 KB fits within 152 KB total Flash with adequate margin. Failing to link both images produces a master core that hangs in SLAVE_RESET state.
Power sequencing note: VDD and AVDD must rise monotonically within 10 ms to ensure proper POR (power-on reset). If a separate analog LDO drives AVDD, enable it simultaneously with VDD to avoid latch-up. Estimated: with both cores running at full speed (180 + 200 MHz) and all peripherals active, IDD peaks near 95 mA. Design the 3.3 V LDO for 150 mA to maintain a 50% safety margin.
The 250 ps PWM edge placement generates fast slew rates that can cause ringing on the gate-drive traces. Per Microchip dsPIC33CH digital-power design guidelines, keep gate-drive traces shorter than 25 mm and add a 33 ohm source-termination resistor close to the PWM output pin. Estimated: a 50 mm unterminated trace produces -6 dB of overshoot at 100 MHz, which may exceed the gate-driver's absolute-maximum rating on some MOSFETs.
Estimated: at 180 MHz master + 200 MHz slave running dual FOC loops with full peripheral activity, the die dissipates approximately 0.7 W. The 80-pin TQFP has theta_JA near 50 C/W on a 2-layer PCB and 35 C/W on a 4-layer board with a continuous ground plane. For continuous 0.7 W operation in 70 C ambient, junction temperature reaches 105 C on the 2-layer board - within spec but with only 20 C margin to the 125 C industrial limit. Use a 4-layer board with a continuous copper pour under the TQFP thermal pad to maintain margin.
Informasi Konformitas
Industrial temperature grade -40 C to +85 C. RoHS compliant per Microchip product page. The 'I' suffix denotes industrial grade; the 'E' suffix variant (DSPIC33CH128MP508T-E/PT) is extended temperature. AEC-Q100 qualified variants of this family exist but are different part numbers; the I/PT variant itself is not AEC-Q100 qualified.